Spypoint LIT-10 CELL-LINK Replacement Battery 3.7V 10500mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Spypoint LIT-10 CELL-LINK Replacement Battery 3.7V 10500mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Spypoint LIT-10 CELL-LINK Replacement Battery 3.7V 10500mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
10500mAh
Spypoint CELL-LINK / LINK-MICRO Series — 3.7V Li-ion Replacement Battery (LIT-10)
This is a 3.7V 10500mAh Li-ion replacement for the original Spypoint LIT-10 battery. It fits the CELL-LINK, LINK-MICRO, LINK-MICRO-LTE, and LINK-MICRO-S-LTE cellular transmitter modules. Swap it when your unit stops sending images or shows a low-battery alert in the Spypoint app.
- CELL-LINK and LINK-MICRO compatibility: These four models share the same 3.7V battery bay and LIT-10 connector footprint. The BMS handshake is identical across the range, so one cell covers all four units without modification.
- Bench tested on actual hardware: We cycled this cell through full charge-discharge sequences on the CELL-LINK transmitter. The BMS accepted the cell cleanly, held voltage above 3.5V under cellular transmission load, and tripped cutoff at the correct low-voltage threshold without fault codes.
- Field deployment tip — cold-weather starts: Li-ion cells lose 15–25% usable capacity at 0°C and up to 40% at −20°C. Before mounting the unit in freezing conditions, keep the battery in an inner pocket until the moment of installation. A warm cell going into a cold housing holds charge far longer than one pre-installed the night before.
Why the CELL-LINK transmits fewer images per charge in winter
Cold temperatures slow the electrochemical reactions inside the Li-ion cell, reducing the charge carriers available during each cellular transmission burst. The CELL-LINK draws a concentrated spike of current each time it connects to the network to push an image — that spike hits harder against a cold, reduced-capacity cell. The result is steeper voltage sag per transmission cycle, which the BMS reads as a lower state of charge than the cell actually holds at room temperature. Keeping the unit in an insulated housing or a weatherproof box with hand warmers extends usable field life significantly through winter.
Unit not powering on after sitting in a cold blind all winter
If the CELL-LINK was left installed through several weeks of freezing temperatures, the battery may have self-discharged below the BMS minimum boot voltage — typically around 2.5V for this cell chemistry. At that point the BMS locks the cell out to prevent damage, and the unit will not respond to the power button. Bring the battery indoors to room temperature for two hours, then connect it to a charger rated for 3.7V Li-ion. If the charger detects the cell and begins a recovery charge, let it complete a full cycle before reinstalling. Check the cell voltage with a multimeter — anything above 2.5V should recover; below that, replace the cell.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Spypoint
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My CELL-LINK stops sending photos after a few days in cold weather even though the battery shows charged — what's happening?
Cold air drops the Li-ion cell's usable capacity, so the battery genuinely delivers less energy even if it read full when warm indoors. Each cellular transmission pulls a current spike that causes heavier voltage sag at low temperatures, triggering the BMS to report low battery earlier than it would in summer. This isn't a fault — it's physics. Keep the battery warm in a pocket until the moment you mount the unit, and store the transmitter in an insulated enclosure between camera checks.
The battery compartment cover on my LINK-MICRO feels damp inside after a rainstorm — should I be worried?
Moisture inside the compartment can cause micro-corrosion on the battery contacts and eventually interfere with the BMS connection, leading to intermittent power loss or failure to charge. Dry the contacts with a cotton swab before reinserting the battery, and check that the rubber gasket on the cover sits fully seated before closing. Going forward, apply a thin film of dielectric grease to the gasket before each field deployment in wet conditions. This keeps moisture out without blocking the electrical path.
My LINK-MICRO-LTE sat in storage all winter with the battery inside and now won't turn on at all — is the battery dead?
Li-ion cells self-discharge slowly during storage, and several months in a cold shed can pull the cell below the BMS minimum boot threshold of around 2.5V. The BMS locks itself out at that voltage to prevent cell damage, which is why the unit shows no sign of life. Bring the battery to room temperature, then connect it to a 3.7V Li-ion compatible charger and wait — most chargers will initiate a trickle recovery charge if the cell is still above 2.5V. Check with a multimeter; a reading above 2.5V means recovery is likely with a full charge cycle.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
