Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Covidien Kangaroo ePump F010484WT Replacement Battery 4.8V 3600mAh

Up to 20% off
New arrival
From $43.99 USD $54.99
Shipping calculated at checkout.
Fits Covidien Kangaroo ePump enteral feeding pumps; replaces OEM part F010484WT, 6094, 1054715.
4.8V, 3600mAh Ni-MH chemistry delivers steady power for motor and control circuits across intermittent and continuous feed cycles.
Connector seats into the battery compartment with a single locking tab on the right side; verify tab engagement before closing cover.
We bench-tested this cell in a Kangaroo ePump charger; the BMS accepted the charge profile on first insertion with no fault codes.
Allow the pump to complete its full power-on self-test sequence without interruption after installation — the device verifies cell integrity at startup, and interrupting this cycle triggers a false battery fault that persists until the next full reboot.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Please Confirm Delivery Timeline

Fresh Battery, Worth the Wait

To provide the highest-quality replacement battery, we ship this battery directly from the manufacturer rather than from aging warehouse inventory. This means delivery may take a little longer, but it helps ensure you receive a fresh battery with better performance, a longer lifespan, and greater reliability.

Estimated delivery: 7–10 business days
4.8
★★★★★
★★★★★
Average Customer Rating
By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

4.8V

Amp

3600mAh

Covidien Kangaroo ePump — 4.8V Ni-MH Replacement Battery (F010484WT)

This is a 4.8V, 3600mAh Ni-MH battery for the Covidien Kangaroo ePump enteral feeding pump. It fits both the standard Kangaroo ePump and Kangaroo ePump Enteral Feeding Pump variants. It replaces OEM part numbers F010484WT, 6094, and 1054715.

  • Kangaroo ePump compatibility: Both pump variants share the same 4.8V power rail, connector footprint, and BMS handshake protocol. The cell count and voltage match the OEM spec exactly, so the pump's control board recognises the battery without throwing a fault code on startup.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the Kangaroo ePump platform. The BMS completed its verification pass without cutoff, and the pump's motor draw stayed within the cell's continuous discharge rating across the full test sequence.
  • Post-swap self-test protocol: After installing this battery, let the pump complete its full power-on self-test cycle without interruption. The Kangaroo ePump runs a BMS verification sequence at boot — cutting power during this window triggers a false battery fault flag that persists until the next clean reboot cycle.

Why the Kangaroo ePump alarms low battery on a freshly charged replacement

The pump's charge IC sets a conservative acceptance threshold calibrated to a conditioned OEM cell. A new Ni-MH cell has not yet stabilised its internal resistance, so the BMS reads voltage recovery curves as below threshold and triggers the alarm. This clears after one complete charge-discharge cycle, which allows the BMS to map the cell's actual capacity profile. Do not use the pump clinically until that first full cycle is complete.

Kangaroo ePump not powering on after the replacement battery sat in storage

Ni-MH cells self-discharge at roughly 1–2% per day at room temperature. A cell stored for several months can drop below the pump's BMS recovery threshold, typically around 4.0V for a 4.8V four-cell pack, at which point the BMS blocks startup to protect the cells. Connect the battery to the pump's charger and leave it for a full charge cycle before attempting to power on. If the charge indicator does not respond within 30 minutes, check that the charger output is reaching at least 5.5V at the connector.

Compatible Models

Kangaroo ePump Kangaroo ePump Enteral Feeding Pumps

Replaces Part Numbers

F010484WT 6094 1054715

Technical Specifications

Voltage4.8V
Amp Hours3600mAh
Capacity3600mAh
Rate17.28Wh
Net Weight214g /7.55 oz
Gross Weight284g /10.02 oz
Approximate Weight284g /10.02 oz
Dimension 67.80 x 46.40 x 34.34mm

Product Highlights

  • Brand: Covidien
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Kangaroo ePump shows a low battery alarm straight after I charged the new battery — is the replacement faulty?

It is not faulty. The pump's BMS applies a voltage threshold calibrated to a conditioned cell, and a brand-new Ni-MH cell has not yet stabilised its internal resistance profile. The BMS interprets the unfamiliar charge curve as a weak cell and triggers the alarm. Run one full charge-discharge cycle on the pump before clinical use — the alarm clears once the BMS maps the new cell's actual capacity.

The Kangaroo ePump shuts off unexpectedly during a feed, even though the battery indicator showed adequate charge.

The Kangaroo ePump's motor draw creates a load spike during pump actuation that new Ni-MH cells handle less efficiently in the first 5–10 cycles. The voltage sags under peak load, which crosses the BMS low-voltage cutoff threshold even when resting voltage looks acceptable. This is a new-cell characteristic, not a defect — cell impedance drops as it cycles. Complete 5 full charge-discharge cycles before relying on the battery for extended clinical sessions.

The charge indicator on the Kangaroo ePump won't reach 100% on the first charge of the new battery.

The pump's charge IC applies a delta-peak voltage detection limit that is conservative with new Ni-MH cells. On the first charge, the cell's voltage rise is shallower than a conditioned pack, so the IC terminates early or holds at a sub-100% display reading. This corrects itself after the first complete cycle. Charge the battery fully, run the pump through a normal discharge, then recharge — the indicator will reach 100% from the second charge onward.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Covidien Kangaroo ePump Replacement Battery, 4.8V, 3600mAh, Ni-MH 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections