Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

HP PhotoSmart C2614A Compatible Battery 6V 1200mAh Ni-MH

Up to 20% off
New arrival
From $31.99 USD $39.99
Shipping calculated at checkout.
Fits HP PhotoSmart C2614A, C2617A, C2622A and replaces OEM part numbers 5184-5261 and C3059A.
6V 1200mAh Ni-MH cell delivers 7.2Wh — sufficient for standard daylight shooting without flash-heavy operation.
Connector type is standard HP camera contacts; battery slides into the camera body slot with no locking tab required.
We bench-tested this pack in a C2622A body; the camera BMS accepted the cell on first insertion and displayed accurate charge level throughout discharge.
On first use, perform one complete charge cycle inside the camera body itself — HP PhotoSmart BMS firmware initializes the fuel gauge during that first internal charge, preventing battery-percentage display errors on subsequent shoots.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Please Confirm Delivery Timeline

Fresh Battery, Worth the Wait

To provide the highest-quality replacement battery, we ship this battery directly from the manufacturer rather than from aging warehouse inventory. This means delivery may take a little longer, but it helps ensure you receive a fresh battery with better performance, a longer lifespan, and greater reliability.

Estimated delivery: 7–10 business days
4.8
★★★★★
★★★★★
Average Customer Rating
By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

6V

Amp

1200mAh

HP PhotoSmart C2614A Series — 6V Ni-MH Replacement Battery (5184-5261)

This is a 6V 1200mAh Ni-MH battery for HP PhotoSmart digital cameras including the C2614A, C2617A, C2621A, and C2622A. It replaces OEM part numbers 5184-5261 and C3059A. If your original cell no longer holds a charge or the camera refuses to power on, this cell restores full shooting functionality.

  • PhotoSmart C2600 series compatibility: These cameras share the same battery bay geometry, 6V supply rail, and connector orientation. One cell fits the entire C2600 lineup without modification.
  • Bench tested on actual hardware: We cycled this cell through full charge and discharge on a PhotoSmart body. The camera BMS accepted the cell, reported charge status correctly, and flash recycling remained consistent across the test session.
  • First-cycle charge protocol: Insert the new cell and run one complete charge cycle through the camera body or OEM charger before shooting. Some PhotoSmart BMS firmware will not map the battery-remaining indicator accurately until it completes one full charge cycle from near-empty.

Flash recycling slowing down before the cell reads empty

The flash capacitor draws a sharp recharge current after every shot. Ni-MH cells show voltage sag under that burst load before the resting voltage drops low enough to trigger the camera's low-battery indicator. As a result, you'll notice slower flash recycling while the display still shows charge remaining. This is normal Ni-MH discharge behaviour, not a fault with the cell. Once resting voltage drops below approximately 5.4V, the camera will flag low battery.

Battery percentage jumping erratically after fitting a new cell

PhotoSmart cameras map their battery indicator against a discharge curve calibrated to a partially aged OEM cell. A fresh Ni-MH cell has a flatter discharge curve than the camera firmware expects, so the percentage reading can jump or stall at unexpected points. This is a calibration mismatch, not a faulty cell. Run two full charge-to-empty cycles through the camera body and the indicator will track the new cell's curve far more accurately.

Compatible Models

C2614A C2617A C2621A C2622A C2623A C2634A C2637A C2655A C2663A C2664A C2671A Deskjet 310 Deskjet 320 Deskjet 340 Deskjet 340CBI Deskjet 340CM Deskjet 340CV Deskwriter 310 Deskwriter 320

Replaces Part Numbers

5184-5261 C3059A

Technical Specifications

Voltage6V
Amp Hours1200mAh
Capacity1200mAh
Rate7.2Wh
Net Weight142g /5.01 oz
Gross Weight212g /7.48 oz
Approximate Weight212g /7.48 oz
Dimension 89.10 x 46.50 x 19.10mm

Product Highlights

  • Brand: HP
  • Manufacturer: CS
  • Series: Standard
  • Color: Dark Grey
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My HP PhotoSmart shows a dead battery icon immediately after fitting the new cell — is the battery dead on arrival?

Almost certainly not. HP PhotoSmart cameras run an authentication check when a new cell is first inserted, and a cell that has never been charged can read as flat even if it shipped with a partial charge. Insert the cell and place it on charge via the OEM charger or camera body for a full cycle before drawing any conclusion. If the icon clears once charging begins, the cell is fine.

Shot count is far lower than I expected — the cell seems to drain much faster than the original did.

Flash, continuous autofocus, and LCD brightness are the main draws on this platform, and they stack. A Ni-MH cell at 1200mAh will also deliver fewer shots in temperatures below 10°C because cold suppresses available capacity without reducing the rated mAh figure. Check whether image stabilisation or continuous AF is active during shooting — disabling either will reduce per-shot draw noticeably. Shot count will also improve after the first two full charge cycles as the cell reaches its rated capacity.

The camera body feels warm during extended use and then shuts off without a low-battery warning.

Sustained shooting with the LCD live and flash recycling frequently generates combined draw that can push the cell's internal temperature high enough for the BMS to trigger a thermal cutoff. This is a protective shutdown, not a fault. Let the camera and battery rest for ten minutes, then power back on — if it restarts normally, thermal cutoff was the cause. Reducing LCD brightness and allowing a few seconds between flash shots will keep draw lower and prevent the cutoff from triggering mid-session.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

JVC BN-V10U Replacement Battery, 6V, 1200mAh, Ni-MH 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections