Philips Trilogy 100 14.4V 6800mAh Replacement Battery 1043570
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Philips Trilogy 100 14.4V 6800mAh Replacement Battery 1043570 - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Philips Trilogy 100 14.4V 6800mAh Replacement Battery 1043570 - is backordered and will ship as soon as it is back in stock.
Voltage
14.4V
Amp
6800mAh
Philips Trilogy 100 Breathe — 14.4V Li-ion Replacement Battery (1043570)
This 14.4V 6800mAh (97.92Wh) lithium-ion battery replaces the OEM pack in the Philips Trilogy 100 Breathe portable ventilator and compatible Respironics Trilogy platforms. It fits the Trilogy 100 Breathe, Respironics Trilogy, Respironics T70 Cough Assist, and Ventilateur Trilogy 100, among others. Cross-references include OEM part numbers 1043570, M3969, 1113780, 1043670, 88881034, and 1055804.
- Trilogy platform compatibility: These models share a common 14.4V battery rail, connector pinout, and BMS handshake protocol. The ventilator's charge management IC authenticates the pack at power-on — any variation in cell chemistry signalling causes an immediate fault flag, so cells are matched to the OEM voltage profile.
- Bench tested on actual hardware: We ran this pack on the Trilogy 100 platform and logged BMS initialisation through the full power-on self-test sequence. The pack cleared all BMS verification checkpoints and held voltage within the device's acceptable operating window across charge and load cycles.
- Self-test cycle after installation: After fitting the battery, allow the Trilogy to complete its full power-on self-test without interruption. The device runs a BMS verification routine at startup — cutting power during this sequence triggers a false battery fault that will persist until the next clean reboot from a rested state.
Low battery alarm triggering on the Trilogy 100 Breathe with a freshly charged replacement
The Trilogy's battery management system uses a charge threshold calibrated to the OEM cell's internal resistance profile. A new replacement cell has a slightly different impedance signature on the first few cycles, which the BMS interprets as incomplete charge capacity. The device raises a low battery alarm not because the cell lacks charge, but because the BMS has not yet learned the new cell's discharge curve. Running one complete charge-to-full, discharge-to-cutoff cycle allows the BMS to recalibrate and clears the persistent alarm.
Trilogy 100 Breathe will not power on after replacement battery has been in storage
Li-ion cells self-discharge during storage at roughly 1–3% per month. If the pack voltage drops below approximately 10.8V — the Trilogy's BMS recovery threshold — the device refuses to boot as a protection measure against cell damage from deep discharge. Connect the battery to the ventilator while it is on mains power and leave it charging without attempting to power on for at least 30 minutes. This allows the charge IC to trickle-charge the cells back above the BMS recovery floor before a normal boot is attempted.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Philips
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Trilogy 100 Breathe keeps alarming low battery right after I installed a fully charged replacement — what's wrong?
The Trilogy's BMS sets its alarm threshold based on the internal resistance it expects from the OEM cell. A fresh replacement cell reads differently on the first few cycles, so the BMS flags it as low even when it's fully charged. This is a calibration issue, not a fault with the battery. Run one full charge-discharge cycle — charge to 100%, let the device run on battery until it cuts off, then recharge fully — and the alarm clears.
The Trilogy 100 Breathe shut down mid-use about an hour into a therapy session, but the battery showed charged before the session started — why?
New cells haven't been conditioned to the Trilogy's load profile yet. Ventilators draw higher current during pressure delivery cycles than during standby, and in the first 5–10 cycles, a new cell's voltage can sag enough under that load to trip the BMS under-voltage cutoff even when the resting charge appears normal. The fix is to complete several full charge-discharge cycles before relying on the pack for unsupervised therapy. After conditioning, the BMS will accurately track remaining capacity under the device's actual load.
The charge indicator on my Trilogy 100 Breathe stopped at around 95% and hasn't moved in hours — is the battery faulty?
The Trilogy's charge IC applies a conservative current taper on the first charge of a new cell, which causes it to hold below 100% longer than expected while it completes absorption-phase charging. This is normal behaviour and not a sign of a defective pack. Leave the device on mains power connected to the battery for a further 2–3 hours without interrupting the charge cycle. If the indicator still does not reach 100% after a full second charge attempt from near-empty, check that the mains adaptor is delivering the correct 19V output.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





