Wiko Barry 3.7V Replacement Battery BARRY 2000mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Wiko Barry 3.7V Replacement Battery BARRY 2000mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Wiko Barry 3.7V Replacement Battery BARRY 2000mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
2000mAh
Wiko Barry / Barry Dual SIM — 3.7V Li-ion Replacement Battery (BARRY)
This 3.7V, 2000mAh Li-ion cell replaces the original battery in the Wiko Barry and Barry Dual SIM smartphones. It matches the OEM part number BARRY and fits both single and dual SIM variants of the handset. Dimensions are 70.00 × 59.90 × 4.40mm — verify your original cell before installing.
- Barry and Barry Dual SIM fit: Both variants run the same 3.7V voltage rail, use the same connector pinout, and share the BARRY part number. The BMS handshake is identical across both — one cell covers both boards.
- Bench tested on actual hardware: We ran this cell through a full charge and discharge cycle on the Barry platform. The BMS accepted the cell without error flags, charge IC communicated correctly, and the fuel gauge IC tracked state-of-charge through the full curve.
- First-cycle fast charge protocol: On first use after installation, disable fast charging for one complete discharge-charge cycle. This lets the fuel gauge IC recalibrate its discharge curve against the new cell before high-current charging is applied to an uncalibrated cell.
Why the Barry reports wrong battery percentage after a cell swap
The fuel gauge IC in the Barry stores a learned discharge curve from the original cell. When a new cell goes in, that stored curve no longer matches the actual voltage-to-capacity relationship of the replacement. The phone reads voltage against the old curve and returns an incorrect percentage. One complete discharge down to automatic shutoff, followed by a full charge to 100%, forces the IC to rewrite its reference curve to the new cell.
Sudden shutdown at 20–30% on the replacement cell
This happens when the cell voltage drops sharply under load from the modem or display — a voltage cliff the fuel gauge did not predict. The phone's protection circuit trips before the displayed percentage reaches zero. It is not a faulty cell; it is the gauge IC working from a miscalibrated curve. Run one full discharge-charge cycle and the shutoff point will shift — the gauge recalibrates its cliff detection around the new cell's actual voltage floor, typically near 3.4V under load.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Wiko
- Manufacturer: CS
- Series: X-Longer
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Wiko Barry won't turn on at all after sitting in a drawer for months — is the battery dead?
A cell left discharged for an extended period can drop below 2.5V, which triggers BMS lockout — the battery refuses to deliver current until it receives a trickle charge. Connect the phone to a wall charger and leave it for 20–30 minutes without attempting to power it on. If the BMS recovers, the charge IC will begin accepting current and the phone will boot normally. If the charging indicator never appears after 45 minutes on a known-good charger, the cell has dropped below the BMS recovery threshold and needs replacement.
Fast charging stopped working after I swapped the battery in my Barry — the phone just charges slowly now.
On the first charge cycle after a cell swap, the BMS on the new cell has not yet negotiated a charging profile with the phone's charge IC. The system defaults to standard 5V charging as a precaution. Complete one full slow charge to 100%, then discharge the phone normally to automatic shutoff. On the next charge cycle, the charge IC and BMS complete their handshake and fast charging resumes at the expected rate.
The battery percentage on my Barry jumps around erratically — it reads 60%, then suddenly 35% a few minutes later.
This is the fuel gauge IC recalibrating after the cell swap — it is reading voltage against a curve built for the original cell, and the mismatch causes erratic percentage jumps. The coulomb counter resets its reference points during a full cycle. Discharge the phone completely until it shuts itself off, then charge uninterrupted to 100% without using the device. After that single cycle the gauge IC locks onto the new cell's discharge curve and percentage tracking stabilises.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.
-
Up to 21% offNew arrival
BatteryWeb
BLU Life Pay mini C664404140L Replacement Battery 3.7V 1300mAh
0.11 lb
Sale priceFrom $23.99 USD Regular price $29.99Unit priceIn stock (81 units) -
-
Up to 20% offNew arrival
BatteryWeb
HTC One E9 Replacement Battery 3.85V 2800mAh 35H00239-00M
0.15 lb
Sale priceFrom $25.99 USD Regular price $31.99Unit priceIn stock (72 units) -
-
Up to 21% offNew arrival
BatteryWeb
BL245 Lenovo S60 Replacement Battery 3.8V 2150mAh
0.13 lb
Sale priceFrom $24.99 USD Regular price $30.99Unit priceIn stock (99 units) -
-
Up to 20% offNew arrival
BatteryWeb
B0PGE100 HTC One M9 Compatible Battery 3.8V 2840mAh
0.17 lb
Sale priceFrom $25.99 USD Regular price $31.99Unit priceIn stock (168 units) -
-
Up to 21% offNew arrival
BatteryWeb
Microsoft Lumia 640 XL 3.8V 3000mAh Replacement Battery
0.19 lb
Sale priceFrom $26.99 USD Regular price $33.99Unit priceIn stock (81 units) -
-
Up to 21% offNew arrival
BatteryWeb
BV-T4B Nokia Lumia 640 Compatible Battery 3.8V 3000mAh
0.19 lb
Sale priceFrom $26.99 USD Regular price $33.99Unit priceIn stock (81 units) -
-
Up to 21% offNew arrival
BatteryWeb
Xiaomi Mi 4i BM33 Replacement Battery 3.85V 3000mAh
0.15 lb
Sale priceFrom $24.99 USD Regular price $30.99Unit priceIn stock (165 units) -
-
Up to 21% offNew arrival
BatteryWeb
BLP595 Oppo R7 Replacement Battery 3.8V 2300mAh
0.17 lb
Sale priceFrom $26.99 USD Regular price $33.99Unit priceIn stock (87 units) -
