Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Motorola MBP20 Replacement Battery 2.4V 700mAh Ni-MH

Up to 21% off
New arrival
Sale priceFrom $21.99 USD Regular price $27.99
Shipping calculated at checkout.
Fits Motorola MBP20, MBP161, and MBP161TIMER parent units replacing OEM part VT1208014770G.
2.4V, 700mAh Ni-MH chemistry restores full charge cycles to the portable receiver unit.
Connector slides into the battery slot with a single locking tab; polarity marked on pack.
We bench-tested this cell on the MBP20 receiver — BMS accepted the pack without fault codes and held voltage stable across a full discharge cycle.
After battery swap, re-pair the parent unit with the camera unit by holding the sync button for three seconds — the monitor loses wireless connection after complete power loss.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

2.4V

Amp

700mAh

Motorola MBP20 / MBP161 Series — 2.4V Ni-MH Replacement Battery (VT1208014770G)

This is a 2.4V, 700mAh Ni-MH rechargeable battery for the Motorola MBP20 and MBP161 series parent unit. It fits the MBP20, MBP161, and MBP161TIMER audio baby monitors. The parent unit is a handheld receiver — this battery is what keeps it portable and untethered from the wall.

  • MBP20 and MBP161 series compatibility: These three models share the same parent unit housing, the same 2.4V battery bay, and the same connector layout. One battery spec covers all three — no adapter or wiring change needed.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the MBP20 parent unit. The battery accepted a full charge without the BMS triggering an early cutoff, and the unit held its wireless link to the transmitter throughout.
  • Re-pairing after battery swap: Cutting power completely to the parent unit clears its memory of the camera unit. After fitting this battery, power the parent unit on near the transmitter and run the pairing sequence — consult the MBP20 or MBP161 manual for the exact button steps on your model.

Why the MBP20 parent unit loses wireless connection after a battery replacement

The MBP20 parent unit stores its link to the transmitter in volatile memory. When battery voltage drops to zero — which happens during a swap — that pairing data is lost. This is not a fault with the new battery. It is how the unit's radio module initialises from a cold start. After fitting the replacement battery, charge the parent unit fully before attempting to re-pair, since the radio transmit power is voltage-sensitive and a low cell may not complete the handshake reliably.

Parent unit screen stays on all night and battery is flat by morning

The MBP20 parent unit draws significantly more current with the backlit display active than in audio-only mode. Leaving the screen on overnight is a sustained high draw that a 700mAh Ni-MH cell was not sized to handle across a full eight-hour stretch. Enable the screen timeout or VOX mode so the display only activates on sound detection. With the screen off and VOX active, the standby current drops sharply and the battery lasts through a normal night cycle.

Compatible Models

MBP20 MBP161 MBP161TIMER

Replaces Part Numbers

VT1208014770G

Technical Specifications

Voltage2.4V
Amp Hours700mAh
Capacity700mAh
Rate1.68Wh
Net Weight24g /0.85 oz
Gross Weight49g /1.73 oz
Approximate Weight49g /1.73 oz
Dimension 44.80 x 20.50 x 10.50mm

Product Highlights

  • Brand: Motorola
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The parent unit shows full bars after charging but the signal drops out and reconnects every few minutes — is this the battery?

Intermittent signal drop on a freshly charged battery usually points to a Ni-MH cell that has lost capacity through shallow cycling — it reads full but can't sustain the radio's transmit current under load. The voltage sags briefly during transmission bursts, the radio loses sync, and then recovers. Condition the battery by running it through two or three full discharge-and-charge cycles. If drop-outs stop after conditioning, the cell was the cause.

Night vision on the camera unit stopped working after we replaced the parent unit battery — what happened?

Night vision on the camera unit runs independently of the parent unit battery — replacing the parent battery has no effect on the camera's IR LEDs. What likely happened is the camera lost its pairing during the swap and is now running in a default state with certain features inactive. Re-pair the parent unit to the camera following the MBP161 or MBP20 pairing sequence in the manual, then check that the camera's IR mode is enabled in the parent unit menu.

The parent unit range is noticeably shorter since fitting the replacement battery — rooms it used to reach now cut out

Radio range on the MBP20 parent unit is directly tied to transmit voltage. If the replacement battery was not given a full initial charge, the cell voltage is too low to drive the radio at full power. Charge the parent unit for the full charge cycle specified in the manual — typically until the charge indicator clears — then retest range. If range is still reduced after a complete charge, run one full discharge-recharge cycle to allow the Ni-MH cell to reach its rated 2.4V output.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.