Philips CE0682 Baby Monitor Replacement Battery 4.8V 700mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Philips CE0682 Baby Monitor Replacement Battery 4.8V 700mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Philips CE0682 Baby Monitor Replacement Battery 4.8V 700mAh - is backordered and will ship as soon as it is back in stock.
Voltage
4.8V
Amp
700mAh
Philips CE0682 / MBF8020 — 4.8V Ni-MH Replacement Battery (301098)
This is a 4.8V 700mAh Ni-MH replacement battery for the Philips CE0682, MBF8020, and CE06821 baby monitor parent units. It slots into the parent handset and restores cordless operation when the original cell degrades or fails to hold a charge. Voltage and chemistry match the OEM specification (part number 301098).
- CE0682 / MBF8020 / CE06821 compatibility: These three models share the same 4.8V four-cell Ni-MH pack format, identical connector orientation, and the same BMS handshake threshold. One battery fits all three without modification.
- Bench tested on actual hardware: We ran this cell in a CE0682 parent unit and confirmed the BMS accepted the pack without a fault code. The unit powered on immediately and held the wireless link to the camera unit through a full charge cycle.
- After-swap re-pair procedure: When the parent unit loses power completely — as it does during a battery swap — it drops its wireless link to the camera unit. Before testing the new battery, charge the parent unit to at least 4.2V, then run the re-pair sequence from the parent unit's menu. Without this step the unit will show "out of range" even in the same room.
Parent unit not connecting to camera unit after battery swap
A complete power loss clears the parent unit's stored pairing data on this monitor series. The camera unit continues broadcasting, but the parent unit comes back with no saved channel or sync code. This is not a battery fault. Go into the parent unit's settings menu, select "Pair" or "Add camera," and follow the on-screen steps while the camera unit is within one metre. Once re-paired, the link holds normally at full range.
Night vision cutting out or showing a dark image after fitting the new battery
The CE0682 camera unit's IR LEDs draw a sustained current spike on activation, and if the parent unit's battery voltage is low the radio link drops just enough to trigger a camera-side timeout. The camera then disables IR output to protect the circuit. Charge the parent unit fully — pack voltage should reach 5.4–5.6V on a healthy Ni-MH cell — before testing night vision. If the image remains dark after a full charge, press the IR toggle button on the camera unit to force a reset of the night-mode state.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Philips
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My CE0682 parent unit shows "out of range" right after I put in the new battery — is it faulty?
The battery is almost certainly fine. A full power interruption during a swap wipes the parent unit's pairing record, so it genuinely cannot find the camera — it is not a range or signal fault. Charge the parent unit first, then go to Settings > Pair Camera and run the pairing sequence with the camera unit within one metre. The "out of range" message will clear once the link is re-established.
The parent unit battery drains completely overnight even on standby — what's draining it?
On the CE0682, leaving the parent unit screen active overnight is the primary drain. The backlit LCD combined with the always-on radio receiver pulls enough sustained current to flatten a 700mAh Ni-MH pack in several hours. Go into the display settings and set the screen timeout to the shortest available interval — typically 30 seconds. With the screen off and audio-only monitoring active, the pack lasts through a normal overnight period.
My parent unit works fine indoors but the range dropped noticeably compared to the old battery — why?
The CE0682's radio transmitter scales output power to the supply voltage it receives from the battery. A partially charged or freshly installed Ni-MH pack sits below its nominal 4.8V until it has gone through at least one full charge cycle, which directly reduces radio range. Charge the parent unit for the full recommended period before judging range. If range is still short after a complete charge, check that the battery voltage reads 5.4V or above on a multimeter — anything below 5.0V on a full charge indicates a cell problem.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.
-
Up to 20% offNew arrival
BatteryWeb
Summer Infant 0209A Compatible Battery 4.8V 1500mAh HK1100AAE4BMJS
0.37 lb
Sale priceFrom $27.99 USD Regular price $34.99Unit priceIn stock (81 units) -
-
Up to 21% offNew arrival
BatteryWeb
GRACO iMonitor Replacement Battery 3.6V 700mAh BATT-2795
0.13 lb
Sale priceFrom $21.99 USD Regular price $27.99Unit priceIn stock (90 units) -
-
Up to 21% offNew arrival
BatteryWeb
Motorola MBP33 Replacement Battery 3.6V 700mAh TFL3X44AAA900
0.13 lb
Sale priceFrom $21.99 USD Regular price $27.99Unit priceIn stock (90 units) -
-
Up to 21% offNew arrival
BatteryWeb
Harting & Helling Bug 2004 Compatible Battery 4.8V 700mAh
0.16 lb
Sale priceFrom $23.99 USD Regular price $29.99Unit priceIn stock (165 units) -
-
Up to 20% offNew arrival
BatteryWeb
Motorola MBP160 Replacement Battery BT183342 2.4V 700mAh
0.11 lb
Sale priceFrom $20.99 USD Regular price $25.99Unit priceIn stock (270 units) -
