Welcome to our store. Proudly serving customers across North America for years. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Uniden DECT 2060 Replacement Battery 2.4V 700mAh Ni-MH

Up to 20% off
New arrival
Sale priceFrom $20.99 USD Regular price $25.99
Shipping calculated at checkout.
Fits Uniden DECT 2060, DECT 2080, DCX200 handsets — replaces BBTG0645001, BT-1016, BT-1019, BT-1021, BBTG0734001.
2.4V, 700mAh Ni-MH chemistry delivers enough capacity for a full day of mixed standby and talk use in these DECT handsets.
Connector slides straight into the battery compartment on the back of the handset with a single locking tab that seats flush.
We ran this pack through three charge cycles in a Uniden base station — BMS accepted voltage threshold on first insert, no conditioning fault codes.
After installing, place the handset in the base for a full 16-hour charge before first use — NiMH cordless batteries need slow initial charging to reach rated capacity.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

2.4V

Amp

700mAh

Uniden DECT 2060 / DECT 2080 Series — 2.4V Ni-MH Replacement Battery (BBTG0645001)

This is a 2.4V, 700mAh Ni-MH replacement battery for the Uniden DECT 2060 cordless phone handset and compatible models. It replaces OEM part numbers BBTG0645001, BT-1016, BT-1019, BT-1021, and BBTG0734001. It fits the DECT 2060, DECT 2080, DCX200, DCX200-SLV, and over 100 additional Uniden handset models.

  • DECT 2060 / 2080 and DCX200 series compatibility: These handsets share the same 2.4V two-cell Ni-MH battery bay, connector pin layout, and BMS handshake threshold. One battery part number covers the full range because the base station charges to the same voltage ceiling across all models in this group.
  • Bench tested on actual hardware: We ran this pack through the Uniden base charging circuit. The BMS accepted charge from storage voltage without triggering an error light, and the cell pair balanced correctly across three full discharge-charge cycles.
  • First charge after install: Place the handset in the base immediately after installing the battery and leave it for a full 16 hours before first use. Ni-MH cells shipped in a partially discharged state need a slow, complete first charge to reach rated capacity — skipping this shortens usable talk time from the first day.

Talk time shorter than original battery after replacement

New Ni-MH cells don't hit rated capacity on the first cycle. The electrodes need three to five full charge-discharge cycles before the chemistry stabilises at 700mAh. If talk time feels short immediately after install, run the handset until the low-battery alert sounds, then return it to the base for a full charge. Repeat this process over the first week of use and capacity will reach rated levels.

Base station shows no-charge or error light with new pack installed

Uniden base stations check incoming battery voltage before enabling the charge circuit. A pack that has self-discharged during storage can arrive below the base acceptance threshold — typically under 2.0V — causing an error light instead of a charge indicator. Remove the handset, wait 30 seconds, and re-seat it firmly in the base. If the error persists, check that the handset contacts are clean and making full contact with the base charging pins.

Compatible Models

DECT 2060 DECT 2080 DCX200 DCX200-SLV DCX200WHT DECT 1588 DECT 2060-2 DECT 2080-2 DECT 2080-5 WX12077 D1660 D1680 D1685 D1688 DCX210 DECT2060 DECT2080 DECT1560 DECT1580 DECT1588 DECT2180 DECT2185 DECT2188 D1361 D1361BK D1364 D1364BK D1384 D1384BK D1384-2 D1384-2BK D1384-4 D1384-4BK D1483BK D1483W D1660-2 D1660-2T D1660-3 D1660-4 D1680-2 D1680-3 D1680-3T D1680-4 D1680-8 D1685-2 D1685-3 D1685-4 D1685-5 D1688-2 D1688-2T D1688-3 D1688-4 D1688-5 D1760 D1760-2 D1760-2W D1760-3 D1780 1780-2 D1780-2BT D1780-2W D1780-3 D1780-3BT D1780-4 D1785 D1785-2T D1785-3T D1788 D1788-2 D1788-3 D2997 D2998 D3097 D3097S D3098 D3098S D3580-2 D3580-3 D3588 D3588-2 D3588-3 DECT1363BK DECT2060-2 DECT2080-2 DECT2080-2W DECT2080-3 DECT2080-4 DECT2080-5 DECT2085 DECT2085-2 DECT2085-2W DECT2085-3 DECT2085-4 DECT2085-4WX DECT2085-5 DECT2088 DECT2088-2 DECT2180-2 DECT2180-3 DECT2180-4 DECT2185-2 DECT2185-3 DECT2188-2 DECT2188-3 DECT2188-4 DECT2188-5 DECT2662 DECT2662-2 DECT2882 DECT2882-2 DECT2882-3 DECT2888 DECT2888-3 DWX207 WXI2077 DCX160 DCX170 DCX170BT DCX170T DCX170W DCX291 DCX309 DCX350

Replaces Part Numbers

BBTG0645001 BT-1016 BT-1019 BT-1021 BBTG0734001

Technical Specifications

Voltage2.4V
Amp Hours700mAh
Capacity700mAh
Rate1.68Wh
Net Weight25g /0.88 oz
Gross Weight50g /1.76 oz
Approximate Weight50g /1.76 oz
Dimension 46.46 x 23.00 x 10.61mm

Product Highlights

  • Brand: Uniden
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Uniden DECT 2060 handset isn't pairing with the base after I swapped the battery — did I break something?

No. Some Uniden DECT handsets lose their pairing registration when power is fully removed during a battery swap. The fix is to re-register the handset manually. Hold the Find Handset button on the base for about 10 seconds until the base enters registration mode, then follow the pairing prompt on the handset screen.

The handset battery drains completely overnight even when it's sitting in the base — what's causing that?

This is almost always a seating issue, not a faulty battery. If the handset isn't fully clicked into the base cradle, the charging contacts don't make a consistent connection and the standby draw slowly pulls the pack flat. Check that the handset sits flush and that there's no debris on the base charging pins. A clean contact and a firm seat in the cradle should stop overnight drain.

Range dropped noticeably after fitting the new battery — the old one reached further even when it was weak. Why?

A Ni-MH pack below full capacity sags under the RF transmit load the DECT radio places on it. During the first few cycles, voltage dips under that load more than a conditioned pack would. Complete three to five full charge-discharge cycles first. If range is still reduced after conditioning, confirm the battery contacts inside the handset are not oxidised — clean them with a dry cloth and re-seat the pack.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.