Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Amazon Kindle Replacement Battery 3.7V 1200mAh Li-ion

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits Amazon Kindle and D00111 models, replaces OEM part numbers A00100, BA1001, and 170-1001-00.
3.7V 1200mAh lithium-ion cell delivers 4.44Wh to restore page-turn response and eliminate low-battery shutdowns.
Connector seats flush into the standard Amazon battery slot with positive terminal alignment verified on hardware.
We bench-tested this cell in a D00111 unit; the BMS accepted the new pack on first insertion without fault codes.
After installation, charge via USB-C for a full cycle before reading — Kindle firmware recalibrates battery percentage display after cell swap.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1200mAh

Amazon Kindle D00111 — 3.7V Li-ion Replacement Battery (170-1001-00)

This 3.7V, 1200mAh Li-ion battery is a direct replacement for the first-generation Amazon Kindle and Kindle D00111 e-reader. It matches the original cell's voltage, capacity, and connector configuration. OEM part numbers A00100, BA1001, and 170-1001-00 all cross-reference to this cell.

  • Kindle D00111 platform fit: The D00111 hardware uses a single-cell 3.7V Li-ion configuration with a three-pin connector carrying voltage, ground, and a thermistor signal. This replacement uses the same pinout and cell dimensions (67.44 × 44.22 × 5.01mm), so the connector seats without modification.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on a Kindle D00111 unit. The BMS accepted the cell without fault flags, percentage reporting tracked correctly after a full charge cycle, and the e-ink display refreshed normally at both full and low charge states.
  • Post-swap charge cycle on Kindle: E-reader firmware on the D00111 tracks charge history to display battery percentage. After swapping cells, run a complete charge via USB before first use — skipping this step causes the percentage indicator to jump or read inaccurately until the firmware resets its calibration reference.

Kindle D00111 not powering on after battery swap

Replacement cells ship at storage voltage — typically 3.0V to 3.3V — which sits below the Kindle D00111's minimum boot threshold of around 3.4V. The device will not attempt to power on below that threshold, so pressing the power button produces nothing. Connect the Kindle to a USB charger immediately after installing the new cell and leave it for at least 10 minutes before attempting to power on. Once the cell climbs above the boot floor, the device starts normally.

Battery percentage jumping around after installing a new cell

The Kindle D00111 firmware uses charge history stored from the previous cell to calculate percentage. A new cell has no history, so the firmware initially maps voltage to percentage using stale data — this causes the readout to skip in large steps or drop suddenly. This corrects itself after one full charge and discharge cycle. Run the device down to the low-battery warning, then charge uninterrupted to 100% — after that single cycle, percentage tracking stabilises.

Compatible Models

Kindle Kindle D00111

Replaces Part Numbers

A00100 BA1001 170-1001-00

Technical Specifications

Voltage3.7V
Amp Hours1200mAh
Capacity1200mAh
Rate4.44Wh
Net Weight29.9g /1.05 oz
Gross Weight55g /1.94 oz
Approximate Weight55g /1.94 oz
Dimension 67.44 x 44.22 x 5.01mm

Product Highlights

  • Brand: Amazon
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Kindle won't turn on at all after I put the new battery in — did I get a dead cell?

Almost certainly not. Replacement cells ship at storage voltage, usually between 3.0V and 3.3V, and the Kindle's boot circuit requires at least 3.4V to start. Plug the Kindle into a USB charger immediately and leave it connected for 10 minutes without pressing anything. Once the cell charges above the boot threshold, the device powers on normally.

The battery percentage is jumping from 80% straight to 20% — is the new cell faulty?

The Kindle firmware carries over charge-history data from the old cell and tries to apply it to the new one, which produces inaccurate and erratic percentage readings. Run the device down until the low-battery warning appears, then charge it to 100% in a single uninterrupted session. After that one full cycle, the firmware recalibrates its reference points and percentage tracking settles.

My Kindle drains noticeably faster when I leave WiFi on compared to just reading — is that normal with this cell?

Yes, and the gap is significant. The WiFi radio on the Kindle D00111 draws several times more current than the e-ink display does during normal page turns. The 1200mAh cell at 3.7V handles display-only use efficiently, but sustained WiFi — syncing, downloading, or leaving the radio active — pulls the cell down much faster. Turn WiFi off when you are not actively syncing to get the most from each charge.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.