Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

DR-A014 Amazon Kindle Touch Replacement Battery 3.7V 1400mAh

Up to 20% off
New arrival
Sale priceFrom $25.99 USD Regular price $31.99
Shipping calculated at checkout.
Fits Kindle Touch (D01200) and replaces OEM part numbers DR-A014, 170-1056-00, S2011-002-A, S2011-002-S, MC-354775.
3.7V, 1400mAh Li-Polymer cell delivers 5.18Wh — sufficient for weeks of reading-only use between charges.
Connector seats flat into the Kindle Touch battery slot with no polarity confusion; locking tab resets cleanly.
We bench-tested this cell in a Kindle Touch and confirmed BMS accepted the new pack without fault codes or voltage cutoff errors.
After installation, charge via USB for a complete cycle before reading — e-reader firmware recalibrates battery percentage display after cell swap.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1400mAh

Amazon Kindle Touch D01200 — 3.7V Li-Polymer Replacement Battery (DR-A014)

This is a 3.7V, 1400mAh Li-Polymer battery for the Amazon Kindle Touch e-reader (model D01200). It replaces OEM part numbers DR-A014, 170-1056-00, S2011-002-A, S2011-002-S, and MC-354775. If your Kindle Touch no longer holds a charge or fails to power on, this cell is a direct swap for the original.

  • Kindle Touch compatibility: The D01200 and Kindle Touch 4th generation share the same battery footprint, connector, and 3.7V nominal voltage rail. One cell fits both. No adapter or modification needed.
  • Bench tested on actual hardware: We cycled this cell on a Kindle Touch D01200 unit and confirmed the BMS accepted the new cell without fault flags. Charge acceptance was normal from the first USB session.
  • Post-swap charge cycle: After installing this cell, run a full USB charge before powering on the device. The Kindle Touch firmware recalibrates its battery percentage display against a full-capacity baseline — skipping this step causes the gauge to read inaccurately for several cycles.

Kindle Touch not powering on after battery swap

Replacement Li-Polymer cells typically ship at storage voltage — around 3.6V or lower. The Kindle Touch firmware requires a minimum boot threshold to initialise the e-ink display controller. If the cell voltage sits below that threshold, the device will not respond to the power button. Connect a USB charger immediately after installation and leave it for at least 10 minutes before pressing power. The device should show a charging indicator on-screen at that point.

Battery percentage jumping or reading 0% right after a new cell

The Kindle Touch tracks battery state using a coulomb counter calibrated to the original cell's discharge curve. A new cell resets that reference. Until the firmware completes a full charge-to-discharge cycle, the percentage reading will jump, drop suddenly, or show 0% despite the device running normally. Complete one full charge to 100%, then use the device until it powers off from low battery. After that cycle, the gauge stabilises. No hardware fault is present.

Compatible Models

Kindle touch D01200 DR-A014 Kindle Touch 4th

Replaces Part Numbers

DR-A014 170-1056-00 S2011-002-A S2011-002-S MC-354775

Technical Specifications

Voltage3.7V
Amp Hours1400mAh
Capacity1400mAh
Rate5.18Wh
Net Weight37g /1.31 oz
Gross Weight87g /3.07 oz
Approximate Weight87g /3.07 oz
Dimension 89.85 x 59.42 x 4.10mm

Product Highlights

  • Brand: Amazon
  • Manufacturer: CS
  • Series: X-Longer
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Kindle Touch won't turn on after I put in the new battery — did I get a dead cell?

Almost certainly not. Replacement Li-Polymer cells ship at storage voltage, which can be too low for the Kindle Touch to boot its e-ink display controller. Plug the device into a USB charger immediately after installation and wait at least 10 minutes before pressing power. If the screen stays blank past that point, hold the power button for 40 seconds to force a hardware reset.

The battery percentage on my Kindle Touch jumps around wildly after replacing the cell — is the new battery faulty?

This is a firmware calibration issue, not a cell defect. The Kindle Touch uses a coulomb counter tuned to the original battery's discharge profile, and a new cell has no history for it to reference. Complete one full charge cycle from flat to 100%, and the gauge will track accurately after that. No reset or service is needed.

My Kindle Touch battery drains noticeably faster when Wi-Fi is left on — is something wrong with the replacement cell?

Nothing is wrong. The Kindle Touch Wi-Fi radio draws significantly more current than the e-ink display during normal reading — e-ink only consumes power during a page refresh, while Wi-Fi runs continuously in the background. This cell delivers the same 1400mAh as the original spec. Turn Wi-Fi off in Settings when you are not syncing or shopping, and the discharge rate will drop back to expected e-reader levels.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.