Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Pandigital Novel 7" MLP385085-2S Compatible Battery 7.4V 1600mAh

Up to 20% off
New arrival
Sale priceFrom $35.99 USD Regular price $44.99
Shipping calculated at checkout.
Fits Pandigital Multimedia Novel 7" e-reader; replaces OEM battery MLP385085-2S.
7.4V, 1600mAh lithium-polymer cell powers display refresh and processor on aging devices.
Connector slides into battery slot vertically; locking tab seats flush against housing frame.
We bench-tested with Novel 7" firmware; BMS accepted new cell voltage on power-up.
After installation, charge via USB for one complete cycle before reading—firmware recalibrates battery percentage display after cell swap.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

7.4V

Amp

1600mAh

Pandigital Multimedia Novel 7" — 7.4V Li-Polymer Replacement Battery (MLP385085-2S)

This 7.4V, 1600mAh Li-Polymer cell replaces the original MLP385085-2S battery in the Pandigital Multimedia Novel 7" e-reader. It fits the PRD07T10WWH7, R70D200, and R70D256 model variants. Capacity figure is taken directly from the product specification — 11.84Wh total energy.

  • PRD07T10WWH7, R70D200, R70D256 compatibility: These models share an identical 7.4V two-cell Li-Polymer architecture, the same connector pinout, and the same BMS communication protocol — so one cell fits all listed variants without modification.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the Novel 7" platform. The BMS accepted the new cell without fault codes, and the firmware reported state-of-charge correctly after a full charge cycle.
  • Post-swap charging cycle: After fitting this cell, charge the device via USB until the indicator shows 100% before first use. The Novel 7" firmware recalibrates its battery percentage display against a full charge cycle — skipping this step causes inaccurate readings from the first session onward.

Why the Novel 7" battery percentage jumps erratically after a cell swap

The Pandigital Novel 7" firmware stores a charge curve profile built against the original cell's characteristics. A new cell with different internal resistance reads differently at each voltage step, so the reported percentage skips or drops unexpectedly. This is a firmware calibration issue, not a fault with the replacement cell. Run two full charge-to-discharge cycles and the firmware rebuilds its curve against the new cell's actual behaviour.

Novel 7" shows low battery warning immediately after new cell installed

Replacement Li-Polymer cells ship at storage voltage — typically around 3.7V per cell, giving roughly 7.4V across both. The Novel 7" boot sequence checks for a minimum threshold before displaying the home screen, and storage voltage sits close to that floor. If the device shows a low battery warning or shuts down within seconds of powering on, connect the USB charger immediately and leave it for at least 10 minutes before attempting to boot again. The cell needs to reach approximately 7.6V before the firmware clears the low-voltage flag.

Compatible Models

Multimedia Novel 7" PRD07T10WWH7 R70D200 R70D256 Novel Hacking

Replaces Part Numbers

MLP385085-2S

Technical Specifications

Voltage7.4V
Amp Hours1600mAh
Capacity1600mAh
Rate11.84Wh
Net Weight89g /3.14 oz
Gross Weight124g /4.37 oz
Approximate Weight124g /4.37 oz
Dimension 112.50 x 95.00 x 4.50mm

Product Highlights

  • Brand: Pandigital
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Pandigital Novel 7" won't turn on at all after I put the new battery in — did I get a dead cell?

Almost certainly not a dead cell. Replacement Li-Polymer batteries ship at reduced storage voltage, and the Novel 7" will refuse to boot if the cell sits below its minimum threshold. Connect the USB charger and leave it plugged in for 10 minutes without pressing the power button — once the cell climbs above approximately 7.6V, the device will start normally.

The battery percentage on my Novel 7" keeps jumping around — it went from 80% to 45% without me doing anything. Is the new battery faulty?

The firmware is recalibrating, not reporting a fault. The Novel 7" builds its charge curve against the original cell, and a new cell with different internal resistance throws off the percentage calculation at multiple voltage points. Run two complete charge cycles — charge fully to 100%, use the device until it shuts off on low battery, then charge fully again — and the readings will stabilise.

WiFi sync is draining my Pandigital Novel 7" battery far faster than just reading does — is something wrong with the cell capacity?

Nothing is wrong with the cell. WiFi draws significantly more current than the e-ink display alone — typically several times higher — and a 1600mAh cell at 7.4V has a fixed energy budget of 11.84Wh to cover both. Turn WiFi off after syncing and re-enable it only when downloading new content. That single change reduces active current draw back to display-only levels for the majority of use.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.