Fukuda Cardisuny ME501BX 12V Replacement Battery 120279
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Fukuda Cardisuny ME501BX 12V Replacement Battery 120279 - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Fukuda Cardisuny ME501BX 12V Replacement Battery 120279 - is backordered and will ship as soon as it is back in stock.
Voltage
12V
Amp
2000mAh
Fukuda Cardisuny ME501BX ECG Analyzer — 12V Ni-MH Replacement Battery (120279)
This is a 12V 2000mAh Ni-MH replacement battery for the Fukuda Cardisuny ME501BX ECG Analyzer. It fits the portable electrocardiograph used in clinical and point-of-care cardiac diagnostics. Voltage and capacity match OEM part 120279 (also listed as BATT/110279).
- ME501BX compatibility: The ME501BX runs a 12V power rail with a BMS that verifies cell chemistry at startup. Ni-MH cells at this voltage and capacity profile match the handshake the device expects — substituting a different chemistry triggers a persistent battery fault on the status display.
- Bench tested on actual hardware: We cycled this cell through the ME501BX charge circuit and confirmed the BMS accepted the cell, completed its self-test sequence, and passed charge status to the device without fault codes. Charge termination behaved correctly at full capacity.
- Post-install self-test protocol: After fitting this battery, let the ME501BX complete its full power-on self-test without interruption. The device runs a BMS verification sequence at boot — cutting power during this window registers a false battery fault that persists until the next clean reboot cycle.
Why the ME501BX alarms low battery immediately after a confirmed full charge
The ME501BX BMS stores a charge threshold calibrated to the OEM cell's internal resistance profile. A new replacement cell has a slightly different resistance signature on the first few cycles, which causes the BMS to read capacity conservatively. The device may flag low battery even when the cell is at or near full charge. One complete charge-discharge cycle recalibrates the BMS threshold — after that cycle, the alarm clears and the charge indicator reads accurately.
Device will not power on after battery arrived or sat in storage
Ni-MH cells self-discharge during storage — if voltage drops below approximately 10.5V, the ME501BX BMS enters a protection state and blocks normal startup to prevent damage to the cell. The device appears completely dead: no display, no response to the power button. Place the battery on charge for a full uninterrupted cycle before attempting to power on the analyzer. Once voltage recovers above the BMS recovery threshold, the device will boot normally.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Fukuda
- Manufacturer: CS
- Series: Standard
- Color: Blue
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The ME501BX is showing a low battery warning right after I charged this replacement — is the cell faulty?
The cell is not faulty. The ME501BX BMS is calibrated to the internal resistance profile of the original OEM cell, and a new Ni-MH replacement reads slightly differently on the first few cycles. The BMS applies a conservative capacity estimate until it has reference data for the new cell. Run one complete charge-discharge cycle on the device and the alarm will clear — the indicator will then track accurately.
The ME501BX shut off mid-recording and won't restart — what happened?
During the first ten cycles, a new Ni-MH cell responds to the ME501BX's load profile with a steeper voltage sag than a conditioned cell. If the BMS detects voltage dropping below its cutoff threshold under load, it trips and shuts the device down as a protective measure. This is not a defective cell — it is the BMS protecting against an under-voltage event on an unconditioned cell. Fully charge the battery, complete two more charge-discharge cycles outside of clinical recording sessions, and the sag will reduce to within the BMS operating window.
After swapping the battery, the ME501BX fails its self-test and won't clear the fault — how do I fix it?
The self-test failure is caused by an interrupted BMS learn cycle, not a defective battery. If power was removed or the device was restarted during the post-install boot sequence, the BMS flags a persistent battery fault. Power the device off completely, ensure the battery is fully charged, then restart and allow the full boot and self-test sequence to complete without any interruption. The fault clears at the end of a clean, uninterrupted self-test cycle.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





