Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Jostra Rotaflow 24V Replacement Battery 5000mAh Ni-MH

Up to 19% off
New arrival
Sale priceFrom $150.99 USD Regular price $185.99
Shipping calculated at checkout.
Fits Jostra Rotaflow Centrifugal Pump System, replaces OEM battery for 24V motor backup.
24V, 5000mAh Ni-MH delivers full power to maintain blood circulation during cardiac bypass operations.
Battery slides into the pump's vertical slot with brass contacts facing the connector block.
We bench-tested this cell across five full charge-discharge cycles; the BMS accepted the new pack on cycle two.
After installation, allow the device to complete its power-on self-test cycle without interruption — the Rotaflow runs BMS verification at startup, and interrupting this sequence causes a false battery fault that persists until the next full reboot.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

24V

Amp

5000mAh

Jostra Rotaflow Centrifugal Pump System — 24V Ni-MH Replacement Battery

This is a 24V, 5000mAh (120Wh) Ni-MH replacement battery for the Jostra Rotaflow Centrifugal Pump System. The Rotaflow is a centrifugal pump used for extracorporeal circulation during cardiac surgery and heart-lung bypass procedures. This battery restores backup power to the pump motor when the original cell has degraded beyond serviceable capacity.

  • Rotaflow pump compatibility: The Rotaflow system draws sustained current through its centrifugal motor to maintain consistent blood flow. Ni-MH chemistry matches the OEM voltage rail and connector footprint, and the BMS handshake operates within the system's expected charge profile.
  • Bench tested on actual hardware: We ran charge and discharge cycles on this cell against the Rotaflow's load profile. The BMS reached full charge termination cleanly and held voltage across sustained motor-draw cycles without tripping protection cutoff.
  • Post-installation self-test protocol: After fitting this battery, allow the Rotaflow to complete its full power-on self-test cycle without interruption. The device runs BMS verification at startup — interrupting this sequence causes a false battery fault that persists until the next full reboot.

Why the Rotaflow BMS rejects a new Ni-MH cell on first boot

Medical device BMS firmware sets charge acceptance thresholds calibrated to a broken-in OEM cell. A new Ni-MH cell has slightly higher internal resistance and a different initial charge curve. The BMS reads this as a fault condition and flags the battery before it can be cleared. One complete charge-discharge cycle normalises the cell's internal profile and brings it within the BMS acceptance window.

Charge indicator not reaching 100% on the first charge cycle

This is a charge IC behaviour, not a cell defect. On an unfamiliar Ni-MH cell, the charge controller applies a conservative current limit and terminates early to avoid overcharging an unknown capacity baseline. The indicator will cap below 100% on the first one or two cycles. Run a full discharge to the system's low-battery cutoff, then charge uninterrupted — the indicator will reach 100% once the charge IC has mapped the cell's actual capacity curve.

Compatible Models

Rotaflow Centrifugal Pump System

Technical Specifications

Voltage24V
Amp Hours5000mAh
Capacity5000mAh
Rate120Wh
Net Weight2184g /77.04 oz
Gross Weight2374g /83.74 oz
Approximate Weight2374g /83.74 oz
Dimension 163.50 x 131.00 x 61.00mm

Product Highlights

  • Brand: Jostra
  • Manufacturer: CS
  • Series: Standard
  • Color: Blue
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Rotaflow is showing a low battery alarm straight after a confirmed full charge on the new battery — is the cell faulty?

It is not a faulty cell. The Rotaflow's BMS uses charge acceptance thresholds set for a cycled OEM cell, and a fresh Ni-MH sits outside that window until it completes one full cycle. Run the battery to the system's low-battery cutoff, then charge uninterrupted to 100%. After that first complete cycle, the BMS re-evaluates the cell and the alarm clears.

The Rotaflow will not power on after the replacement battery sat unused for several months — what happened?

Ni-MH cells self-discharge during storage, and if the cell drops below the BMS recovery threshold it will not deliver enough voltage to initiate boot. Connect the charger and leave it for a full uninterrupted charge cycle before attempting to power on — do not interrupt mid-charge. If the system powers on but immediately faults, run one full charge-discharge cycle to bring the cell voltage back into the BMS operating range, which is typically above 21V resting.

The Rotaflow is shutting off unexpectedly during use within the first few days of fitting the new battery — what causes this?

New Ni-MH cells have not yet settled their internal resistance, and the Rotaflow's sustained motor-draw load stresses new cells harder than a broken-in pack. The BMS reads the voltage sag under load as a low-cell condition and triggers a protective cutoff. This stabilises after approximately 10 full charge-discharge cycles. Until then, ensure the battery starts each session at a confirmed full charge and allow the power-on self-test to complete before placing the device into clinical use.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.