Zoncare QZ-1212 Replacement Battery 14.8V 5200mAh
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Zoncare QZ-1212 Replacement Battery 14.8V 5200mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Zoncare QZ-1212 Replacement Battery 14.8V 5200mAh - is backordered and will ship as soon as it is back in stock.
Voltage
14.8V
Amp
5200mAh
Zoncare QZ-1212 — 14.8V Li-ion Replacement Battery (INR18650-4S2P)
This is a 14.8V, 5200mAh Li-ion replacement battery for the Zoncare QZ-1212 portable patient monitoring device. It uses an INR18650-4S2P cell configuration — four cells in series, two in parallel — matching the voltage rail and capacity of the original pack. Install it in any QZ-1212 unit where the existing battery no longer holds a usable charge.
- QZ-1212 platform fit: The 4S2P configuration locks the nominal voltage at 14.8V, which matches the QZ-1212's internal power regulation and BMS handshake exactly. Deviating from this cell arrangement would trip the device's battery authentication check and prevent normal startup.
- Bench tested on actual hardware: We cycled this pack through full charge and discharge on the QZ-1212 platform. The BMS completed its recognition handshake on first connection and held the charge curve within expected parameters across the initial conditioning cycle.
- Post-swap self-test protocol: After installing this battery, allow the QZ-1212 to complete its full power-on self-test without interruption. The device runs BMS verification at startup — cutting power during this sequence logs a false battery fault that persists until the next clean reboot.
Device not completing boot sequence on new battery
The QZ-1212 runs a BMS learn cycle during its first few boot sequences with a new cell pack. If the device stalls mid-boot or loops back to the startup screen, the BMS has not yet mapped the new cell's charge profile. This is not a fault with the battery. Connect to mains power, allow a full uninterrupted charge to 16.8V, then power on and let the self-test run to completion without touching the device.
Low battery alarm triggers immediately after a confirmed full charge
The QZ-1212's battery monitoring circuit uses a charge threshold calibrated to the OEM cell chemistry. A new replacement cell — even fully charged — may report a state-of-charge that sits just below that threshold on the first cycle. This is a calibration mismatch, not a defective battery. Run one complete charge-discharge cycle on the device before clinical use and the alarm will clear as the BMS updates its reference values.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Zoncare
- Manufacturer: CS
- Series: Standard
- Color: Blue
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The QZ-1212 won't power on at all after the replacement battery sat in the box for a few months — is it dead?
Extended storage causes Li-ion cells to self-discharge below the BMS recovery threshold, and the QZ-1212 will refuse to boot if pack voltage drops under approximately 12V. Connect the device to mains power and leave it on charge for a minimum of two hours before attempting to power on — the charger circuit will recover the pack from a low-voltage state before the BMS re-engages. If the charge indicator shows activity after 30 minutes, the pack is recovering normally.
The QZ-1212 shuts off unexpectedly during monitoring sessions in the first week of use — what's causing it?
New cells in the INR18650-4S2P pack haven't yet settled their internal resistance, and the QZ-1212's load profile during active monitoring can cause momentary voltage sag that triggers a protective BMS cutoff. This is most common in the first 10 charge-discharge cycles. Run the device through at least three full cycles on mains power before relying on it for extended battery-only sessions — internal resistance drops significantly after conditioning, and the shutoffs stop.
The charge indicator on the QZ-1212 won't reach 100% on the first charge with the new battery — should I be concerned?
The QZ-1212's charge IC applies a conservative current limit when it encounters a new cell pack with no stored cycle history. This causes the first charge to terminate early — typically showing 90–95% — rather than completing a full top-up. This is normal behaviour. Run a full discharge followed by an uninterrupted charge to 16.8V and the indicator will reach 100% from the second cycle onward as the charge IC updates its learned capacity value.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.
-
Up to 19% offNew arrival
BatteryWeb
Creative PC-900 Pro 11.1V Replacement Battery CR2302-0000005
0.79 lb
Sale priceFrom $76.99 USD Regular price $94.99Unit priceIn stock (45 units) -
-
Up to 20% offNew arrival
BatteryWeb
WEGO WGI-1020 Medical Device Replacement Battery 7.4V 2600mAh
0.3 lb
Sale priceFrom $43.99 USD Regular price $54.99Unit priceIn stock (60 units) -
-
Up to 20% offNew arrival
BatteryWeb
Zoncare PM-7000C Replacement Battery 11.1V 2600mAh JHT-99G-00
0.47 lb
Sale priceFrom $39.99 USD Regular price $49.99Unit priceIn stock (57 units) -
-
Up to 19% offNew arrival
BatteryWeb
Zoncare ATOM ECG-6A Replacement Battery 14.8V 2600mAh
0.58 lb
Sale priceFrom $53.99 USD Regular price $66.99Unit priceIn stock (60 units) -
-
Up to 19% offNew arrival
BatteryWeb
Zoncare iMAC 120B Replacement Battery 14.8V 5200mAh
1.18 lb
Sale priceFrom $81.99 USD Regular price $100.99Unit priceIn stock (21 units) -
-
Up to 19% offNew arrival
BatteryWeb
Zoncare IMAC100 Compatible Battery 14.8V 5200mAh
1.18 lb
Sale priceFrom $81.99 USD Regular price $100.99Unit priceIn stock (48 units) -
-
Up to 19% offNew arrival
BatteryWeb
Heine X-004.99.641 Replacement Battery 6V 1200mAh Ni-CD
0.59 lb
Sale priceFrom $53.99 USD Regular price $66.99Unit priceIn stock (63 units) -
-
Up to 19% offNew arrival
BatteryWeb
Chattanooga ABI-L 18V Compatible Battery 3400mAh Li-ion
0.81 lb
Sale priceFrom $100.99 USD Regular price $124.99Unit priceIn stock (57 units) -
