Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Samsung SCH-2200 Replacement Battery 3.7V 1150mAh Li-ion

Up to 21% off
New arrival
Sale priceFrom $22.99 USD Regular price $28.99
Shipping calculated at checkout.
Fits Samsung SCH-2200 and SGH-600 mobile phones with 3.7V Li-ion chemistry.
3.7V, 1150mAh capacity restores full talk time and standby duration on aged or failed original cells.
Connector seats flush into the battery slot; locking tab engages on insertion and holds firm under daily use.
We bench-tested the BMS on a SCH-2200 unit — fuel gauge accepted the cell voltage curve without cutoff errors on first full cycle.
On first charge after installation, complete one full discharge-to-shutdown cycle before resuming normal use; the fuel gauge IC needs to recalibrate against this cell's discharge curve to report accurate percentage.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1150mAh

Samsung SCH-2200 / SGH-600 — 3.7V Li-ion Replacement Battery

This is a 3.7V Li-ion replacement battery rated at 1150mAh (4.26Wh) for the Samsung SCH-2200 and SGH-600 mobile phones. It slots into the original battery bay and connects to the same three-contact interface used on both models. Use this when the original cell no longer holds a usable charge.

  • SCH-2200 and SGH-600 compatibility: Both models share the same 3.7V battery bay, contact pitch, and charge management circuit. One replacement cell covers either handset without modification.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on the SCH-2200 platform. The phone's charge IC accepted the new cell without fault flags, and the BMS responded correctly to termination at full voltage.
  • Fuel gauge recalibration after install: On first use after swapping cells, disable any fast-charge mode and run one full discharge down to automatic cutoff, then charge to 100% uninterrupted. This lets the fuel gauge IC map the new cell's discharge curve before high-current charging begins on an uncalibrated state-of-charge register.

Why the SCH-2200 reports wrong battery percentage after a cell swap

The phone's fuel gauge IC stores a learned discharge curve from the original cell. When a new cell goes in, that stored curve no longer matches the actual voltage-to-capacity relationship of the replacement. The gauge reads voltage but maps it to the old profile, so it shows percentages that drift from reality. One full uninterrupted discharge-charge cycle forces the IC to rebuild its reference curve against the new cell.

Sudden shutdown at 20–30% on the replacement cell

This happens when the cell voltage drops sharply under load — screen-on or active call — while the gauge still shows a comfortable percentage. The protection circuit cuts power the moment cell voltage falls below its low-voltage threshold, typically around 3.0V under load. The gauge percentage at that point is meaningless because it was calibrated to a different discharge curve. Run the recalibration cycle first; if shutdowns continue, check that the battery contacts are clean and seating fully to avoid added resistance pulling voltage down faster.

Compatible Models

SCH-2200 SGH-600

Technical Specifications

Voltage3.7V
Amp Hours1150mAh
Capacity1150mAh
Rate4.26Wh
Gross Weight100g /3.53 oz
Approximate Weight100g /3.53 oz

Product Highlights

  • Brand: Samsung
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The phone won't turn on at all after the replacement battery sat in a drawer for a few months — is the cell dead?

The BMS locks out the cell when voltage drops below roughly 2.5V during storage, which is a self-protection cutoff, not permanent cell failure. Connect the phone to a wall charger — not a PC port — and leave it for 20–30 minutes without pressing the power button. The charge IC will trickle current into the cell until voltage rises above the BMS re-enable threshold, at which point the phone will boot normally.

Fast charging stopped working the first time I plugged in the replacement — the phone just charges slowly now.

On the first charge cycle after a cell swap, the phone's charge controller sometimes defaults to a lower current rate because the BMS on the new cell has not yet completed its initial handshake with the device's charge IC. This is not a fault. Unplug, let the phone sit for two minutes, then reconnect to the original Samsung charger. If the slow charge persists past the first full cycle, confirm the charger output matches the phone's rated input — an underpowered third-party adapter will suppress the fast-charge protocol regardless of the cell fitted.

The battery percentage jumps around erratically — it reads 45%, drops to 12%, then jumps back up without charging.

Erratic percentage jumps are a fuel gauge IC recalibration issue, not a faulty cell. The coulomb counter lost its reference point when the old cell was removed and is now guessing state-of-charge from voltage alone, which is unstable mid-curve on Li-ion. Run one complete uninterrupted discharge to automatic shutdown, then charge to 100% without unplugging. That single cycle re-anchors the coulomb counter to real capacity endpoints and the percentage reading stabilises.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.