AB463446BA Samsung SPH-A420 Replacement Battery 3.7V 800mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
AB463446BA Samsung SPH-A420 Replacement Battery 3.7V 800mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
AB463446BA Samsung SPH-A420 Replacement Battery 3.7V 800mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
800mAh
Samsung SPH-A420 / SPH-A580 Series — 3.7V Li-ion Replacement Battery (AB463446BA)
This is a 3.7V, 800mAh Li-ion replacement battery for the Samsung SPH-A420, SPH-A580, SGH-D347, SGH-D407, and over 90 additional compatible models. It replaces OEM part numbers AB463446BA, AB463446BABSTD, AB553446BA, and AB553446BAB/STD. Dimensions are 49.50 x 33.80 x 4.70mm — verify your original part number before installing.
- Multi-model fit across SPH and SGH lines: The SPH-A420, SPH-A580, SGH-D347, and SGH-D407 share the same 3.7V cell format, connector pinout, and BMS handshake profile — which is why a single part number covers the full group.
- Bench tested on actual hardware: We cycled this cell through full charge and load discharge on compatible hardware. The BMS held charge termination correctly at 4.2V and engaged undervoltage protection at the expected low-cell threshold with no false cutoffs during mid-cycle load spikes.
- Fuel gauge recalibration on first use: On first install, disable fast charging if available and run one full discharge-to-charge cycle before normal use. The phone's fuel gauge IC is calibrated to the old cell's discharge curve — one complete cycle lets it map the new cell's voltage profile and report accurate percentages.
Sudden shutdown at 20–30% on the SPH-A420 after a cell swap
This is a fuel gauge IC mismatch, not a faulty battery. The phone's coulomb counter was calibrated against the discharge curve of the original, degraded cell — so its voltage-to-percentage mapping is wrong for a fresh cell. Under modem or screen load, the new cell's voltage briefly dips at a point the gauge misreads as empty, triggering an emergency shutdown. One full discharge cycle from 100% to automatic cutoff, then a full charge, forces the IC to relearn the new cell's curve and eliminates the false shutoff.
Phone feels warm near the battery during the first few charges
A new Li-ion cell has higher internal impedance than a broken-in cell. During the first one to three charge cycles, the charge IC pushes current into that higher-impedance cell, which generates more heat than usual at the battery contact area. This is normal and resolves as the cell completes its initial formation cycles. If warmth persists beyond the third full charge or the phone becomes hot to the touch, stop charging and check that the replacement part number matches AB463446BA exactly.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Samsung
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My SPH-A420 shows 25% battery and then shuts off without warning — is the new battery bad?
The battery itself is not the problem here. The phone's fuel gauge IC was calibrated to the old cell's discharge curve, so it misreads the voltage cliff on the new cell and calls it empty under load. Run one full discharge from 100% down to automatic shutdown, then charge to 100% without interruption. After that single cycle the gauge recalibrates to the new cell and the premature shutdowns stop.
The battery percentage on my phone is jumping around erratically after I installed the replacement — it went from 60% to 80% without charging.
Erratic percentage readings are a coulomb counter recalibration symptom. The fuel gauge IC accumulated drift tracking the old degraded cell, and it has not yet mapped the new cell's discharge curve. Avoid topping up or partial charges for the first two cycles — let the phone discharge fully each time so the IC can build an accurate state-of-charge model. After two complete discharge-charge cycles the readings stabilise.
My phone will not power on at all after the replacement battery sat unused in storage for a few months — I just installed it and nothing happens.
A Li-ion cell stored for several months can self-discharge below 2.5V per cell, which triggers BMS lockout to prevent damage. The BMS will not allow a normal charge cycle to start from this state. Connect the phone to a wall charger — not a USB port — and leave it for 20 to 30 minutes without attempting to power it on. The charger's trickle current will bring the cell above the BMS re-entry threshold, after which the phone will show a low-battery screen and boot normally.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





