Asus ZenBook Duo UX481FA Replacement Battery 15.4V 4500mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Asus ZenBook Duo UX481FA Replacement Battery 15.4V 4500mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Asus ZenBook Duo UX481FA Replacement Battery 15.4V 4500mAh - is backordered and will ship as soon as it is back in stock.
Voltage
15.4V
Amp
4500mAh
Asus ZenBook Duo UX481FA Series — 15.4V Li-Polymer Replacement Battery (C41N1901)
This is a 15.4V, 4500mAh (69.3Wh) Li-Polymer replacement battery for the Asus ZenBook Duo UX481FA-HJ047T and over 100 additional ZenBook Duo and ZenBook UX481 variants. The ZenBook Duo runs two active displays simultaneously, which places a higher and more constant current draw on this cell than a standard single-screen notebook. OEM part numbers covered include C41N1901, 0B200-03520000, and 0B200-03520100.
- ZenBook Duo dual-display platform: All UX481FA and UX481FL variants share the same 15.4V four-cell architecture and C41N1901 connector pinout. The ScreenPad Plus secondary display draws power continuously alongside the main panel, so the BMS on this cell is rated to handle the sustained combined load without throttling the discharge curve.
- Bench tested on actual hardware: We cycled this cell on a UX481FA unit under dual-display load. The BMS held the 15.4V rail stable through CPU burst events and did not trigger an overcurrent cutoff during ScreenPad Plus transitions from sleep to active.
- Post-install calibration on the ZenBook Duo: After fitting this cell, run one full discharge until the laptop hibernates, then charge uninterrupted to 100% without interruption. This forces the BIOS battery learn cycle to reset against the new cell's EEPROM data and clears the false "poor health" or "0% capacity" warning that commonly appears after a cell swap on this platform.
BIOS reporting poor battery health immediately after fitting the new cell
The ZenBook Duo BIOS reads health data from EEPROM on the battery controller, not from a live cell measurement. When a new cell is installed, the EEPROM data does not match the learned values from the old pack, so the BIOS flags the battery as degraded or unknown before any charge cycle has run. This is not a fault with the replacement cell. Run one full discharge to hibernate-cutoff, then a complete uninterrupted charge to 100%. After that single learn cycle, the BIOS health indicator should return to normal on the next boot.
Laptop shuts down abruptly at 20–30% charge shown on the ZenBook Duo
This happens when the fuel gauge IC has not yet calibrated its discharge curve against the new cell's actual chemistry. The IC predicts remaining capacity using data from the previous cell, and the estimate diverges sharply under the dual-display load this platform sustains. The cell voltage drops below the BMS cutoff threshold before the gauge reaches 0%, which causes an immediate shutdown rather than a graceful hibernate. Complete two to three full discharge-and-recharge cycles — the fuel gauge recalibrates progressively and the shutdowns stop once it tracks the new cell's voltage curve accurately down to its 3.0V per-cell floor.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Asus
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
Why does Windows show the ZenBook Duo battery as "0% available (plugged in)" straight after fitting the replacement?
The fuel gauge IC on the C41N1901 controller still holds calibration data from the old cell, so it reports zero until it runs a full measurement cycle against the new chemistry. Plug in the charger, let it reach 100% without interruption, then discharge fully to hibernate-cutoff once. After that single cycle the gauge resets its reference points and Windows reads the correct percentage.
The ZenBook Duo stops charging at 80% and won't go higher — is the new cell faulty?
This is almost always the BIOS charge-limit feature, not a cell fault. Asus ships many UX481 units with Battery Health Charging enabled in MyASUS or in the BIOS, which caps charge at 80% to reduce cell stress during daily plugged-in use. Open MyASUS, go to Customization → Battery Health Charging, and switch the mode from Balanced to Full Capacity. The cell will then charge to 100%.
Windows Device Manager shows the wrong Wh rating for the replacement battery on the UX481FA — it says 50Wh instead of 69.3Wh
The Wh figure Windows displays is pulled from the EEPROM on the battery controller, which stores the rated design capacity of the original OEM cell. The replacement cell carries its own EEPROM value, and if the stored figure differs from the physical chemistry, Windows reports the EEPROM number until a learn cycle updates it. Run one full discharge to hibernate-cutoff followed by a complete charge to 100%. After that cycle, check Settings → Battery → Battery Information — the reported Wh value should align with the 69.3Wh specification of this cell.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






