Dell G5 5590-D2785W Replacement Battery 11.4V 7800mAh
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Dell G5 5590-D2785W Replacement Battery 11.4V 7800mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Dell G5 5590-D2785W Replacement Battery 11.4V 7800mAh - is backordered and will ship as soon as it is back in stock.
Voltage
11.4V
Amp
7800mAh
Dell G5 5590-D2785W — 11.4V Li-Polymer Replacement Battery (06YV0V)
This is an 11.4V, 7800mAh (88.92Wh) Li-Polymer battery for the Dell G5 15 5590-D2785W gaming laptop and compatible Alienware and G-series models. It replaces OEM parts 06YV0V, 0JJPFK, 1F22N, and XRGXX. If the original cell has degraded or failed, this restores portable operation without replacing the machine.
- G5 and G7 series compatibility: These Dell and Alienware gaming platforms share the same 11.4V three-cell architecture, connector pinout, and BMS handshake protocol — which is why a single part number covers the G5 5590, G7 7590, ALW15M-D1523S, and ALW15M-R2758R among others.
- Bench tested on actual hardware: We ran this cell through charge and discharge cycles on a G5 5590 chassis. The BMS negotiated charge termination correctly, the protection circuit tripped at the expected low-voltage threshold, and the BIOS accepted the cell without a firmware block.
- BIOS learn cycle after install: After fitting this battery, run the laptop down to hibernate cutoff on one continuous discharge, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap.
Why the G5 5590 shuts down at 20–30% after a battery swap
The Dell G5 5590 runs a combined CPU-plus-display load that pulls hard on the cell at mid-charge states. A new cell that hasn't been through a calibration cycle holds EEPROM data from the factory, not from actual in-system discharge curves. The fuel gauge IC maps capacity against that stale data and triggers shutdown when the cell voltage drops below the threshold it expects — not the real empty point. One full discharge-to-hibernate followed by a full charge corrects the mapping.
BIOS reporting battery health as "poor" or "unknown" immediately after install
The Dell BIOS reads health status from the battery's EEPROM register, which still reflects the old cell's wear state until a learn cycle writes new data. This is not a fault with the replacement cell — it is a data mismatch. Open Dell SupportAssist or navigate to BIOS battery diagnostics and run a full battery health reset. After one complete charge-to-discharge-to-charge cycle, the register updates and the warning clears. If it persists, confirm the cell voltage at rest reads between 11.1V and 12.6V.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Dell
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The system info screen shows the wrong Wh rating after I put the new battery in — is something wrong with it?
The Wh figure displayed in Windows or Dell SupportAssist pulls from the EEPROM embedded in the battery cell, not from a live measurement. A replacement cell ships with factory-rated EEPROM data that may differ slightly from the previous cell's logged value. This is a data reporting difference, not a capacity defect. Run one full discharge-to-hibernate then charge to 100% and the system will recalculate against actual chemistry.
My Dell G5 5590 stops charging at 80% and won't go higher — is the new battery faulty?
This is a BIOS-controlled charge limit, not a battery fault. Dell laptops shipped with certain firmware versions cap charging at 80% when "Primary AC Use" or a battery conservation mode is enabled in Dell Power Manager. Open Dell Power Manager, navigate to Battery Settings, and switch the charge mode to "Adaptive" or "Full Charge." The battery itself will accept a full charge once that firmware flag is cleared.
The fuel gauge jumps around wildly — showing 60%, then 45%, then 70% within minutes of unplugging
The fuel gauge IC calibrates against discharge curves stored from the previous cell. With a new cell installed, it has no accurate reference curve yet, so readings oscillate until it maps the new chemistry. This settles after two to three full discharge-to-charge cycles. Do not run partial charges during calibration — let each cycle go from above 90% down to hibernate cutoff, then charge uninterrupted to 100%.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.







