Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Maibenben MaiBook S431 Replacement Battery 7.6V 4800mAh

Up to 19% off
New arrival
Sale priceFrom $75.99 USD Regular price $93.99
Shipping calculated at checkout.
Fits Maibenben MaiBook S431 laptop, replaces OEM part CN6613-2S3P battery pack.
7.6V, 4800mAh lithium-polymer cell delivers 36.48Wh — matches original capacity for full session length.
Connector seats into the MaiBook S431 battery slot with standard keyed alignment and locking tab.
We charged this cell in the S431 dock and confirmed the BMS accepted the full 4800mAh capacity without cutoff errors.
After installation, discharge fully to sleep mode then charge uninterrupted to 100% — this resets the BIOS battery learn cycle and clears false health warnings.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

7.6V

Amp

4800mAh

Maibenben MaiBook S431 — 7.6V Li-Polymer Replacement Battery (CN6613-2S3P)

This is a 7.6V, 4800mAh (36.48Wh) lithium-polymer replacement battery for the Maibenben MaiBook S431 laptop. It uses OEM part number CN6613-2S3P and fits the S431 notebook directly. Install it when the original cell no longer powers the machine adequately or refuses to charge.

  • MaiBook S431 fitment: The S431 uses a 2S3P cell configuration on a 7.6V nominal rail. The CN6613-2S3P part number matches the connector pinout and BMS communication protocol that the S431 motherboard expects. Swapping in a mismatched cell will trigger a BIOS battery-unknown error immediately.
  • Bench tested on actual hardware: We ran the cell through charge and discharge cycles on the S431 platform. The BMS handshake completed correctly, the BIOS recognised the battery without flags, and charge current stepped down cleanly at the 4.35V-per-cell threshold.
  • Post-install calibration on the MaiBook S431: After fitting this cell, run one full discharge until the laptop hibernates on low battery, then charge uninterrupted to 100%. This resets the S431's battery learn cycle and clears the inaccurate health warning that appears in the BIOS after any cell replacement.

MaiBook S431 shutting down at 20–30% charge remaining

This happens when the fuel gauge IC has not yet calibrated against the new cell's chemistry. The old EEPROM data sets incorrect low-voltage thresholds, so the system cuts power before the cell is actually empty. Under combined CPU and display load, voltage sag on an uncalibrated cell can hit the shutdown floor fast. Run two full discharge-to-hibernate then charge-to-100% cycles to let the fuel gauge IC recalibrate against real cell behaviour.

BIOS showing incorrect Wh rating after CN6613-2S3P install

The Wh figure the BIOS displays is read from EEPROM data stored in the battery's controller — it reflects the rated value programmed at manufacture, not a live measurement. If the number shown differs from 36.48Wh, the EEPROM value and the actual cell chemistry are reporting separately, which is normal across replacement cells from different production runs. This does not affect charging or discharge behaviour. Confirm the voltage rail reads 7.6V in the OS battery report — if it does, the cell is operating correctly.

Compatible Models

MaiBook S431

Replaces Part Numbers

CN6613-2S3P

Technical Specifications

Voltage7.6V
Amp Hours4800mAh
Capacity4800mAh
Rate36.48Wh
Gross Weight450g /15.87 oz
Approximate Weight450g /15.87 oz

Product Highlights

  • Brand: Maibenben
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My MaiBook S431 BIOS is flagging the new battery as "unknown" or showing 0% health — is the cell faulty?

This is an EEPROM mismatch, not a faulty cell. The S431's BIOS reads health data cached from the previous battery's controller, and it takes at least one full learn cycle to update. Run the laptop down to hibernate cutoff, then charge uninterrupted to 100%, and the BIOS health flag will clear. If it persists after two cycles, check the BIOS battery management page for a "reset battery statistics" option and run it.

The S431's charge indicator stopped at 80% and won't go higher — what's stopping it?

The MaiBook S431 BIOS includes a charge-limit setting that caps charging at 80% to reduce long-term cell wear. This is a firmware control, not a fault with the replacement cell. Go into the BIOS battery settings and confirm the charge threshold is set to 100%. Once that's changed and saved, the cell will charge to full on the next cycle.

The battery percentage on the MaiBook S431 is jumping around wildly — drops 15% in minutes, then climbs back — why?

The fuel gauge IC is still mapping the new cell's discharge curve. The old calibration data does not match the CN6613-2S3P cell, so the reported percentage swings until the IC builds an accurate profile. This settles after two to three full discharge-and-charge cycles. After the third full cycle, check that the reported voltage at shutdown sits between 6.0V and 6.4V — that range confirms the fuel gauge is now tracking correctly.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.