Aisino V71 POS Terminal Replacement Battery IS803 3.7V 2200mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Aisino V71 POS Terminal Replacement Battery IS803 3.7V 2200mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Aisino V71 POS Terminal Replacement Battery IS803 3.7V 2200mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
2200mAh
Aisino V71 — 3.7V Li-ion Replacement Battery (IS803)
This is a 3.7V, 2200mAh Li-ion replacement battery for the Aisino V71 portable payment terminal. It slots into the V71's battery bay and restores power to the terminal used by merchants for card processing in retail and hospitality settings. OEM part number IS803 matches the original cell format and connector.
- V71 platform fit: The V71 uses a single-cell 3.7V Li-ion pack with a BMS handshake tied to the terminal's charge IC. The IS803 part number maps to that handshake, so the terminal recognises the cell and reports state of charge correctly through the firmware.
- Bench tested on actual hardware: We cycled this battery through the V71's full boot sequence, ran a card transaction, and triggered the receipt printer. The BMS held steady through the combined wireless, display, and printer current draw without tripping overcurrent protection.
- First deployment after installation: Complete one full transaction cycle before putting the terminal into live service. The V71 maps battery capacity during normal operation and needs at least one complete power cycle to calibrate the charge indicator accurately.
Receipt printer causing battery drain on the V71
The V71's thermal printer pulls a sharp current spike every time it fires — significantly higher than the baseline draw from the display and wireless radio combined. On a degraded original battery, this spike pushes the cell voltage below the BMS discharge threshold momentarily, which can cause a mid-transaction shutdown. A fresh 2200mAh cell handles this spike cleanly because internal resistance is low. If drain still seems excessive, check whether the terminal is set to print a receipt after every transaction, including declined ones.
Terminal not completing PCI boot sequence after battery swap
The V71 runs a PCI-mandated security check on every boot that draws a short, elevated current burst. If the new battery's BMS hasn't yet completed its first charge handshake with the terminal's charge IC, the terminal may stall partway through that sequence. This isn't a faulty battery — it's the BMS and charge IC synchronising. Connect the terminal to the charger, let it reach a full charge state, then power cycle. After that first full charge, the boot sequence completes normally.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Aisino
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Aisino V71 reboots every time a receipt prints — why does it keep doing this mid-transaction?
The thermal printer in the V71 draws a sharp current spike when it fires, and a worn or deeply discharged battery can't sustain voltage through that spike — the BMS trips and the terminal restarts. This is one of the clearest signs the original cell has lost capacity. Fit the IS803 replacement, run one full transaction cycle to let the terminal calibrate, and the reboot loop stops.
The V71 won't power on at all after sitting in a drawer for a few months — is it the battery?
Almost certainly. Li-ion cells self-discharge over time, and if the V71 sat unused long enough, the battery voltage will have dropped below the BMS recovery threshold — typically around 2.5V — at which point the BMS locks the cell to prevent damage and the terminal shows nothing when you press power. Connect the terminal to the charger for at least 30 minutes before attempting to power on; some chargers need a trickle-charge phase to bring the cell back above the recovery threshold before the BMS re-enables discharge.
The charge indicator on my new V71 battery is stuck at 99% and won't move — is something wrong?
Nothing is wrong. When a fresh Li-ion cell reaches the top-of-charge voltage, the V71's charge IC switches to a top-off mode and holds there briefly while it balances the cell — the indicator sits at 99% during that phase. It typically clears within 15 to 30 minutes of continuous charging. Unplug and replug the charger once to prompt the charge IC to re-read the cell state, and the indicator should update to 100%.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.
-
Up to 19% offNew arrival
BatteryWeb
Safescan LB-105 Compatible Battery 10.8V 700mAh Li-ion
0.27 lb
Sale priceFrom $33.99 USD Regular price $41.99Unit priceIn stock (78 units) -
-
Up to 20% offNew arrival
BatteryWeb
Aisino V71 POS Terminal Replacement Battery IS803 3.7V 2600mAh
0.16 lb
Sale priceFrom $29.99 USD Regular price $36.99Unit priceIn stock (156 units) -
-
Up to 20% offNew arrival
BatteryWeb
VeriFone VX675 Replacement Battery 3.7V 2600mAh BPK265-001
0.16 lb
Sale priceFrom $29.99 USD Regular price $36.99Unit priceIn stock (156 units) -
-
Up to 20% offNew arrival
BatteryWeb
BPK265-001 VeriFone VX675 Compatible Battery 3.7V 2200mAh
0.16 lb
Sale priceFrom $29.99 USD Regular price $36.99Unit priceIn stock (363 units) -
-
Up to 21% offNew arrival
BatteryWeb
Safescan LB-205 Payment Terminal Replacement Battery 7.4V 1200mAh
0.14 lb
Sale priceFrom $26.99 USD Regular price $33.99Unit priceIn stock (363 units) -
-
Up to 21% offNew arrival
BatteryWeb
Way Systems BASIC56 MTT 1510 Replacement Battery 3.7V 850mAh
0.1 lb
Sale priceFrom $23.99 USD Regular price $29.99Unit priceIn stock (306 units) -
-
Up to 20% offNew arrival
BatteryWeb
Ratiotec Soldi Smart 11.1V Replacement Battery ICP483440AL
0.22 lb
Sale priceFrom $28.99 USD Regular price $35.99Unit priceIn stock (159 units) -
-
Up to 20% offNew arrival
BatteryWeb
VeriFone VX680 Replacement Battery 7.4V 1800mAh Li-ion
0.34 lb
Sale priceFrom $38.99 USD Regular price $47.99Unit priceIn stock (216 units) -
