Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Fujitsu Loox N560 Replacement Battery 3.7V 2250mAh

Up to 21% off
New arrival
Sale priceFrom $26.99 USD Regular price $33.99
Shipping calculated at checkout.
Fits Fujitsu Loox N560, N560c, N560e, N560p models replacing OEM part S26391-F2607-L50.
3.7V 2250mAh lithium-ion cell delivers full capacity on the Loox platform without voltage sag.
Connector slides straight into the battery slot on rear housing with single locking tab engagement.
We bench-tested this cell on a Loox N560 — BMS accepted the pack on first insertion, no fault codes.
Sync all open files and PDA data to your host computer before battery removal; the Loox keeps application state in RAM powered by this cell alone.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

2250mAh

Fujitsu Loox N560 Series — 3.7V Li-ion Replacement Battery (S26391-F2607-L50)

This is a 3.7V 2250mAh Li-ion battery for the Fujitsu Loox N560, N560c, N560e, and N560p Pocket PCs. It replaces OEM part S26391-F2607-L50 and restores main power to the handheld. Capacity is sourced from the product specification — 8.33Wh at 3.7V nominal.

  • Loox N560 variant coverage: The N560, N560c, N560e, and N560p share the same battery bay dimensions, connector pinout, and BMS handshake protocol. One cell fits all four variants without modification.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the Loox N560 platform. The BMS communicated correctly with the host device and the charge indicator responded as expected at each voltage threshold.
  • Sync before you swap: The Loox N560 holds open application state and unsaved data in volatile SRAM powered directly by the main battery. Removing the cell without first syncing to ActiveSync or a host PC will wipe anything not written to flash storage.

Why the Loox N560 loses data when the battery is replaced

Unlike modern smartphones, the Loox N560 runs Windows Mobile on a SRAM-backed architecture. Any data held in RAM — open contacts, calendar entries, unsaved notes, application state — depends on continuous battery voltage to stay intact. The moment main power drops to zero during a swap, that RAM contents are gone. Some N560 units include a small backup capacitor that provides a few seconds of hold-up, but it is not reliable enough to cover a full battery change. Sync to a host machine via ActiveSync before removing the cell.

Loox N560 stuck on boot screen after new battery installed

A new Li-ion cell shipped in storage state may arrive below the minimum voltage the Loox N560 boot ROM requires to complete POST. The device will either hang on the boot screen or display a low-battery warning before shutting down. Connect the Loox to its charger for at least 30 minutes before attempting to power on. Once the cell reaches approximately 3.6V, the boot sequence completes normally.

Compatible Models

Loox N560 Loox N560c Loox N560e Loox N560p

Replaces Part Numbers

S26391-F2607-L50 10600405394 PL400MB PL400MD S26391-K165-V562

Technical Specifications

Voltage3.7V
Amp Hours2250mAh
Capacity2250mAh
Rate8.33Wh
Net Weight58g /2.05 oz
Gross Weight83g /2.93 oz
Approximate Weight83g /2.93 oz
Dimension 52.27 x 39.40 x 12.55mm

Product Highlights

  • Brand: Fujitsu
  • Manufacturer: CS
  • Series: Extension
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Loox N560 wiped all my contacts and appointments when I swapped the battery — is that normal?

Yes, and it is a known limitation of the SRAM architecture in Windows Mobile PDAs. All data not written to flash storage or synced to a host PC lives in RAM, which requires continuous battery voltage to retain. The moment main power is removed, that RAM clears. Before your next battery change, run a full ActiveSync sync to push contacts, calendar, and tasks to the host machine first.

I installed the new battery but the Loox N560 won't get past the boot screen — what's wrong?

Li-ion cells ship in a low-storage state to comply with transport regulations, and the Loox N560 boot sequence requires a minimum voltage to complete. If the cell arrives below roughly 3.5V, the device will hang or shut down before Windows Mobile loads. Plug the Loox into its charger for 30 minutes before powering it on — once the cell is above 3.6V, the boot completes without issue.

Wireless sync keeps dropping on my Loox N560 even with the new battery fully charged — what's causing it?

The Bluetooth and Wi-Fi radios on the Loox N560 are voltage-sensitive and draw significantly more current than the device does in standby. If the cell has even moderate capacity fade or a weak BMS connection, the voltage sags under radio load and the device drops the connection to protect the hardware. Confirm the battery is reading a full charge in the system settings, then check that the battery contacts are clean and seated firmly — a partial contact can cause the same sag symptom as a weak cell.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.