Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

IBM WorkPad 8602-10U Compatible Battery 3.7V 850mAh Li-Polymer UP383562A

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits IBM WorkPad 8602-10U and WorkPad c500; replaces OEM part UP383562A.
3.7V 850mAh Li-Polymer cell delivers the capacity this PDA needs for full-day standby and active calendar, contact, and document operations.
Connector solders directly to the WorkPad mainboard; verify polarity before install — red wire positive, black negative, no keyed slot.
Bench testing showed the BMS accepted a full charge cycle in under two hours; the PDA boot sequence initialized without fault after first charge.
Sync all calendar, contacts, and documents to a host computer before removing the old battery — the WorkPad stores open files in RAM powered by this cell only.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

850mAh

IBM WorkPad 8602-10U / c500 — 3.7V Li-Polymer Replacement Battery (UP383562A)

This is a 3.7V 850mAh Li-Polymer replacement battery for the IBM WorkPad 8602-10U and WorkPad c500 PDAs. It replaces OEM part number UP383562A. The flat-cell format matches the original cell at 62.80 × 35.22 × 4.00mm, so it fits the existing battery bay without modification.

  • WorkPad 8602-10U and c500 compatibility: Both models run the same 3.7V power rail, share the UP383562A cell footprint, and use the same connector pinout — one replacement covers either unit.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on the WorkPad platform. The BMS held cutoff correctly at low voltage and accepted a full charge without triggering protection faults.
  • Sync before you swap: The WorkPad holds calendar data, contacts, and open application state in volatile SRAM powered directly by this battery. Pull a full HotSync to your host computer before removing the old cell — anything unsaved to flash will be lost the moment power cuts.

Why the WorkPad loses all data when the battery goes flat

The WorkPad c500 and 8602-10U store the active user database — contacts, calendar entries, memos — in SRAM, not flash. SRAM needs a continuous voltage supply to retain data. When the battery discharges fully or is removed without a prior sync, that voltage drops to zero and the RAM contents are wiped. A fresh battery restores power but cannot recover data that was never written to the host. Always HotSync before the battery warning appears, not after.

WorkPad shows the charging screen but won't complete a full boot

A deeply discharged Li-Polymer cell may sit below 3.0V when it arrives or after long storage. The WorkPad boot sequence demands a minimum threshold voltage before it will pass the splash screen. If the device loops on the charging animation or resets immediately on power-up, leave it on charge for 30–60 minutes before attempting to boot. Check that the cell reaches at least 3.6V on the connector before trying again.

Compatible Models

WorkPad 8602-10U WorkPad c500

Replaces Part Numbers

UP383562A

Technical Specifications

Voltage3.7V
Amp Hours850mAh
Capacity850mAh
Rate3.15Wh
Net Weight16.4g /0.58 oz
Gross Weight37.9g /1.34 oz
Approximate Weight37.9g /1.34 oz
Dimension 62.80 x 35.22 x 4.00mm

Product Highlights

  • Brand: IBM
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My WorkPad wiped everything after I swapped the battery — is there any way to recover the data?

No recovery is possible from the device itself once the SRAM loses power. The WorkPad stores contacts, calendar, and memos in volatile RAM, not flash — the moment battery voltage drops to zero during a swap, that data is gone. The only source for those records is the last HotSync backup on your host computer. Restore via HotSync Manager using the most recent backup folder for your user profile.

The WorkPad won't boot after fitting the new battery — it just resets or freezes on the logo screen.

A new or stored Li-Polymer cell can arrive below the minimum voltage the WorkPad needs to complete its boot sequence. Connect the device to a charger and leave it for at least 45 minutes before pressing the power button. If the reset loop continues, check the battery connector is fully seated — the flat-cell connector on the c500 can appear locked but still have one pin lifted. Re-seat and attempt boot once the cell reads 3.6V or above.

Wireless HotSync keeps dropping or running much slower since the battery swap — what's causing it?

The WorkPad's IR and serial sync radio draws significantly more current than standby, and a partially charged cell will sag under that load — the voltage dips enough to trigger a brownout mid-transfer. Run the device on charge for a full cycle before your first wireless sync attempt. If drops continue on a full charge, check that the HotSync cradle contacts are clean; oxidised contacts add resistance that compounds the voltage sag problem.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.