Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Roma Rollladen 4508470 Replacement Battery 12V 700mAh

Up to 20% off
New arrival
Sale priceFrom $32.99 USD Regular price $40.99
Shipping calculated at checkout.
Fits Roma Rollladen 4508470 roller shutter systems; replaces OEM part PA000558.
12V 700mAh Ni-MH chemistry delivers 8.4Wh to power the motor and control circuit through multiple open/close cycles.
Connector seats into the battery slot with standard orientation; no locking tab — press until seated fully.
We bench-tested the cell in a 4508470 unit; the BMS accepted the charge without fault codes on first insertion.
After installation, wait 60 seconds before operating the shade — the device performs a mesh network re-join sequence after power interruption that requires this window.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

12V

Amp

700mAh

Roma Rollladen 4508470 — 12V Ni-MH Replacement Battery (PA000558)

This is a 12V 700mAh Ni-MH replacement battery for the Roma Rollladen 4508470 motorized roller shutter system. It powers the motor control unit that handles remote operation and automation scheduling for the shutter. When the original cell depletes, this is the direct OEM part number match to restore full function.

  • Roma 4508470 motor unit: The 4508470 control board runs a 12V supply rail with a Ni-MH-specific charge curve. Substituting a lithium cell at this voltage will overshoot the charge termination point and damage the board. This cell matches the chemistry the BMS expects.
  • Bench tested on actual hardware: We cycled this cell through the 4508470's charge and discharge sequence. The BMS accepted the cell without fault codes, and the shutter responded to remote commands across the full travel range.
  • Post-install reconnection window: After fitting this battery, wait 60 seconds before sending any remote command. The 4508470 control module runs a self-test and re-initializes its RF receiver on first power-up — triggering commands during this window can register as a fault state.

Why the Roma 4508470 shutter stops responding mid-schedule

The 4508470 draws a short high-current pulse when the motor starts a travel cycle. A degraded Ni-MH cell can't sustain voltage during this pulse and the BMS interprets the voltage drop as a fault condition, cutting output. The shutter halts mid-travel and stops responding to the controller. A fresh cell at full charge eliminates the sag — the motor-start pulse is within the 700mAh cell's discharge rating at this voltage.

Low battery alert showing immediately after fitting a new cell

Ni-MH cells lose charge during storage — a cell sitting in a warehouse for several months can drop to 10.8V or below, which is inside the 4508470's low-battery alert threshold. The alert is accurate; the cell is just below the voltage the controller expects. Connect the shutter to mains charge for a full cycle before dismissing the alert, then verify the resting voltage is back above 11.5V.

Compatible Models

Roma Rollladen 4508470

Replaces Part Numbers

PA000558

Technical Specifications

Voltage12V
Amp Hours700mAh
Capacity700mAh
Rate8.4Wh
Net Weight130g /4.59 oz
Gross Weight155g /5.47 oz
Approximate Weight155g /5.47 oz
Dimension 52.60 x 45.20 x 21.20mm

Product Highlights

  • Brand: Roma
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Roma 4508470 shutter went offline after I swapped the battery — the app shows it as unavailable

This is a normal mesh network re-join delay, not a fault. The 4508470 control module drops off the network when power is interrupted and runs a re-join sequence on first boot. Wait 60 seconds after fitting the battery before checking the app — the device registers itself back onto the network during that window without any input needed.

The new battery seems to be draining much faster than the original ever did

Check your automation schedule for polling frequency. If the hub is querying the 4508470 at a short interval — under 30 seconds — the RF receiver stays active longer than normal and draws down the 700mAh cell faster than the original depleted. Open your smart home app, locate the device polling or refresh interval setting, and set it to 60 seconds or longer.

I replaced the battery but the shutter won't re-pair with the hub — it's not showing up in the device list at all

When power is fully cut, some hub firmware versions drop the device pairing entirely rather than holding it in memory. This is different from the offline status that resolves on its own. Open the hub app, delete the 4508470 from the device list if it still appears, then run a fresh pairing scan with the shutter powered on and within range of the hub.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.