JBL Clip 2 Special Edition Compatible Battery 3.7V 800mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
JBL Clip 2 Special Edition Compatible Battery 3.7V 800mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
JBL Clip 2 Special Edition Compatible Battery 3.7V 800mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
800mAh
JBL Clip 2 Special Edition — 3.7V Li-Polymer Replacement Battery (P453048D 01)
This 3.7V 800mAh Li-Polymer battery replaces the original cell in the JBL Clip 2 Special Edition portable Bluetooth speaker. It matches the OEM part number P453048D 01 and fits the compact clip-on housing without modification. Capacity is 800mAh (2.96Wh), identical to the factory specification.
- Clip 2 Special Edition fit: The Clip 2 Special Edition uses a flat Li-Polymer pouch cell at 58.80 x 41.70 x 3.50mm. That exact footprint matters — a cell even 0.5mm thicker can stress the housing seam and prevent the back panel from closing flush.
- Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the Clip 2 Special Edition board. The protection circuit accepted the cell without fault flags, and the fuel gauge calibrated correctly after two full cycles.
- Monthly discharge cycle for the Clip 2: The Clip 2 is often left on a desk and topped off before it drops below 50%. Run it down past 20% at least once a month before recharging — this prevents fuel gauge drift that causes the speaker to report a false full charge and cut out unexpectedly.
Why the Clip 2 Special Edition cuts out at high volume even on a fresh charge
At maximum volume the amplifier and Bluetooth radio draw current simultaneously, creating a combined spike the aged cell cannot sustain without voltage sag. When cell voltage dips below the protection circuit threshold during that spike, the BMS trips and the speaker shuts off. A new cell with lower internal resistance handles the combined draw without the voltage drop. After fitting the replacement, run two full charge-discharge cycles to let the fuel gauge re-anchor its readings.
Audio distorting before the battery indicator reaches empty
This happens when internal resistance has risen enough that the cell voltage sags under amplifier load, even though the resting voltage still reads mid-range. The amplifier clips because it is not receiving stable voltage, not because the speaker is faulty. The battery indicator reads the resting voltage between draw spikes, so it shows higher than the actual under-load voltage. Replace the cell and confirm resting voltage holds above 3.6V after a full charge before reassembling.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: JBL
- Manufacturer: CS
- Series: Standard
- Color: Blue
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My JBL Clip 2 Special Edition shows a full charge but the audio cuts out after about an hour of use — is that a battery problem?
Yes. A Li-Polymer cell that has been shallow-cycled repeatedly loses capacity while still reporting full charge, because the fuel gauge anchors to a voltage curve that no longer matches the degraded cell. The speaker cuts out when the real remaining capacity runs out, not when the gauge says it should. Replace the battery and run two complete discharge-recharge cycles to let the gauge recalibrate against the new cell's actual curve.
My Clip 2 Special Edition won't respond at all when I plug in the USB cable — it just shows nothing on the indicator, even after leaving it charging overnight.
If the cell has been fully drained and sat discharged for weeks, cell voltage can drop below the minimum acceptance threshold for the USB charging circuit, and the board will not respond. Connect the USB cable and leave it for 20–30 minutes without interruption — some protection circuits need a trickle pre-charge period before the main charge stage engages and the LED activates. If the indicator still shows nothing after 30 minutes, the cell voltage is likely too low to recover and the cell needs replacing before the board will charge normally again.
The Clip 2 Special Edition gets noticeably warm on the back panel during long playback sessions — is that normal, or is something wrong?
Some warmth is expected — the amplifier and battery discharge both generate heat inside a small sealed housing with limited airflow. It becomes a problem when the heat is concentrated and constant, which happens when a degraded cell works harder to deliver the same current, increasing internal resistance and heat output. Check that the fabric housing is not wrapped tightly around the speaker during play, as that traps amplifier heat against the battery. If the warmth persists with a new battery, check that the replacement cell sits flat and the back panel is fully seated without gaps.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.
-
Up to 21% offNew arrival
BatteryWeb
JBL Micro 2 Replacement Battery 3.7V 600mAh FT403048P
0.08 lb
Sale priceFrom $23.99 USD Regular price $29.99Unit priceIn stock (339 units) -
-
Up to 21% offNew arrival
BatteryWeb
JBL Clip 2 Replacement Battery GSP383555 3.7V 800mAh
0.09 lb
Sale priceFrom $23.99 USD Regular price $29.99Unit priceIn stock (117 units) -
-
Up to 20% offNew arrival
BatteryWeb
Bose SoundLink 11.1V Replacement Battery 330107
0.71 lb
Sale priceFrom $47.99 USD Regular price $59.99Unit priceIn stock (147 units) -
-
Up to 21% offNew arrival
BatteryWeb
JBL Micro Replacement Battery 3.7V 700mAh Li-ion FT453050
0.09 lb
Sale priceFrom $23.99 USD Regular price $29.99Unit priceIn stock (162 units) -
-
Up to 21% offNew arrival
BatteryWeb
JBL Go 2 Replacement Battery 3.7V 730mAh Li-Polymer
0.12 lb
Sale priceFrom $23.99 USD Regular price $29.99Unit priceIn stock (345 units) -
-
Up to 20% offNew arrival
BatteryWeb
JBL Pulse 2 Replacement Battery 3.7V 6000mAh Li-Polymer 5542110P
0.32 lb
Sale priceFrom $31.99 USD Regular price $39.99Unit priceIn stock (456 units) -
-
Up to 20% offNew arrival
BatteryWeb
JBL Pulse 3 Replacement Battery 3.7V 6000mAh Li-Polymer
0.55 lb
Sale priceFrom $34.99 USD Regular price $43.99Unit priceIn stock (309 units) -
