Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Nissin BP-53 Flash Battery 14.4V 2600mAh Li-ion

Up to 20% off
New arrival
From $51.99 USD $63.99
Shipping calculated at checkout.
Fits Nissin KF4 and KF4A flash units and replaces OEM battery BP-53.
14.4V at 2600mAh delivers full-power flash recycling for extended shooting sessions without mid-sequence delays.
Connector slides straight into the battery slot with a positive lock tab — orientation is keyed to prevent reverse insertion.
We bench-tested this cell in a KF4A; the BMS accepted the charge curve without early cutoff and held voltage steady under full flash discharge cycles.
After installation, fire three full-power test flashes before field deployment — the flash system recalibrates capacitor charge time to the new cell voltage.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

14.4V

Amp

2600mAh

Nissin KF4 / KF4A — 14.4V Li-ion Replacement Battery (BP-53)

This is a 14.4V, 2600mAh Li-ion replacement for the Nissin BP-53 battery pack. It fits the KF4 and KF4A flash units. The pack supplies the sustained current the flash capacitor bank needs to charge and fire repeatedly during a shoot.

  • KF4 and KF4A compatibility: Both units use the same BP-53 form factor, connector pinout, and 14.4V power rail. The BMS handshake between the flash control board and the battery pack is identical across both models, so one pack covers both without modification.
  • Bench tested on actual hardware: We cycled this pack through repeated rapid-fire sequences and monitored the BMS response. The protection circuit held steady during the capacitor recharge current spikes — no premature cutoff observed across sustained burst shooting.
  • Flash capacitor charge cycling: After installing the new pack, run at least five full charge-and-fire cycles before a critical shoot. The KF4's charging circuit recalibrates recycle time estimates against actual cell output during early cycles, and skipping this step can cause the ready indicator to lag behind true capacitor charge state.

Why the KF4 shows a slow recycle time with a freshly charged pack

The KF4 monitors capacitor recharge current to estimate battery state. A new or recently stored Li-ion cell has slightly elevated internal resistance until it completes a few full discharge-charge cycles. During this break-in period, the flash control board reads the higher resistance as reduced available current and extends recycle intervals accordingly. After three to five full cycles, internal resistance drops to rated levels and recycle speed returns to normal. No settings change is needed — the pack self-conditions through use.

KF4 powers on but shuts off immediately when the flash fires

A capacitor dump during flash firing draws a sharp current spike that can exceed the BMS overcurrent threshold if the pack has been stored below 12V. At that state of charge, the BMS trips as a protection response — not a fault with the pack itself. Connect the BP-53 pack to the KF4's charger and bring it to a full charge before attempting to fire. Once resting voltage reaches 16.4V at full charge, the BMS resets automatically and firing resumes normally.

Compatible Models

KF4 KF4A

Replaces Part Numbers

BP-53

Technical Specifications

Voltage14.4V
Amp Hours2600mAh
Capacity2600mAh
Rate37.44Wh
Net Weight190g /6.70 oz
Gross Weight260g /9.17 oz
Approximate Weight260g /9.17 oz
Dimension 73.28 x 68.40 x 18.50mm

Product Highlights

  • Brand: Nissin
  • Manufacturer: CS
  • Series: Standard
  • Color: Blue
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My KF4 won't accept a charge after the battery sat unused in my bag for several months — charger light just blinks and stops.

A Li-ion pack left unused for months can drop below the BMS recovery threshold, typically around 10V for a 14.4V cell. When voltage falls that low, the BMS enters sleep mode and blocks the standard charge path to prevent damage. Some chargers interpret this as a bad pack and abort the cycle. Connect the pack to the KF4 charger and leave it for 20–30 minutes without interrupting — most chargers run a low-current recovery pulse before switching to full charge. If resting voltage recovers above 12V, the BMS unlocks and normal charging resumes.

Flash recycle speed is noticeably slower mid-shoot compared to when I started — but the battery indicator still shows full.

This is voltage sag under sustained load, not a faulty indicator. After repeated rapid-fire sequences, cell voltage dips temporarily under the current draw of each capacitor recharge cycle, even though resting voltage between shots still reads high. The KF4's control board responds to the sag by throttling recharge current to protect the pack, which lengthens recycle time. Let the pack rest for 60–90 seconds between bursts during heavy shooting to allow cells to recover voltage between recharge cycles.

The KF4A battery percentage jumps erratically on the display — shows 80%, drops to 40%, then climbs back up.

The KF4A's fuel gauge maps voltage thresholds to percentage estimates, and a new Li-ion cell has a slightly different voltage curve than a degraded original pack. Until the indicator recalibrates to the new cell's discharge profile, percentage readings can skip and jump — especially in the mid-range where the Li-ion curve is flattest. Run two or three complete discharge-and-recharge cycles to let the system remap its thresholds. After that, readings stabilise and track consistently from a full 16.4V charge down through the discharge curve.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Nissin KF4 Replacement Battery, 14.4V, 2600mAh, Li-ion 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections