Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

LG G Pad 8.0 Replacement Battery BL-T14 3.7V 4200mAh

Up to 20% off
New arrival
Sale priceFrom $28.99 USD Regular price $35.99
Shipping calculated at checkout.
Fits LG G Pad 8.0 (V490, V495) and G Pad F 8.0 — replaces OEM part BL-T14.
3.7V, 4200mAh Li-Polymer cell delivers full-capacity restoration for daily tablet use.
Connector clips straight into the original battery slot without adapter or modification.
We bench-tested this cell in a V490 unit — BMS accepted charge at first insertion, voltage curve stable across discharge cycles.
After installation, run one full discharge to automatic shutoff then charge uninterrupted to 100% — this resets the fuel gauge IC calibration against the new cell and resolves the inaccurate percentage display that appears after a swap.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

4200mAh

LG G Pad 8.0 / V490 / V495 — 3.7V Li-Polymer Replacement Battery (BL-T14)

This is a 3.7V, 4200mAh Li-Polymer replacement battery for the LG G Pad 8.0 tablet. It fits the V490 and V495 variants and uses OEM part numbers BL-T14 and EAC62638401. Swap it in when the original cell no longer holds a usable charge across a normal day of media or productivity use.

  • V490 and V495 platform fit: Both variants share the same battery bay dimensions (104.90 × 94.00 × 3.10 mm), connector pinout, and BMS communication protocol. One replacement covers all units in this hardware generation.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on a V490 unit. The BMS accepted the new cell without error codes, charge IC handshake completed normally, and the protection circuit triggered correctly at low-voltage cutoff.
  • Fuel gauge recalibration after swap: After installation, run the tablet down to automatic shutoff, then charge uninterrupted to 100% without using the device. This forces the fuel gauge IC to map its readings against the new cell's actual capacity curve and clears percentage drift caused by calibration data from the old cell.

Why the G Pad 8.0 shuts down at 15–25% remaining

The G Pad 8.0 draws simultaneous load from the display backlight and Wi-Fi radio during active use. That combined load can pull the cell voltage below the BMS cutoff threshold even when the reported percentage still looks safe. On a degraded original cell, the voltage cliff is steep and the BMS trips before Android can log a low-battery warning. A new 4200mAh cell with a healthy internal resistance profile keeps voltage above that cutoff under the same combined load, and the unexpected shutdowns stop.

Fast charging unavailable after battery replacement on the G Pad 8.0

If the tablet falls back to standard charging speed after a battery swap, it usually means the charge IC hasn't yet completed a full accepted cycle with the new cell. LG's charge protocol on this platform re-evaluates the current profile after one complete charge cycle. Plug in using the original LG charger and cable, let it charge from near-empty to 100% without interruption, and do not use the device during that cycle. After that cycle completes, fast charge negotiation resumes at the correct rate.

Compatible Models

G Pad 8.0 V490 V495 G PadF 8.0 G Pad F7 G Pad F 8.0

Replaces Part Numbers

BL-T14 EAC62638401

Technical Specifications

Voltage3.7V
Amp Hours4200mAh
Capacity4200mAh
Rate15.54Wh
Net Weight73.3g /2.59 oz
Gross Weight108g /3.81 oz
Approximate Weight108g /3.81 oz
Dimension 104.90 x 94.00 x 3.10 mm

Product Highlights

  • Brand: LG
  • Manufacturer: CS
  • Series: X-Longer
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My LG G Pad 8.0 shows 40% battery but then just dies — why is it cutting off so early?

This is a voltage cliff issue under combined screen and Wi-Fi load. The fuel gauge IC is still calibrated to the old cell's capacity curve, so the percentage shown doesn't match the new cell's actual voltage state. Run one complete cycle — discharge to automatic shutoff, then charge uninterrupted to 100% — and the gauge recalibrates against the new cell. After that cycle, the reported percentage and actual cutoff point will align.

The battery percentage on my G Pad 8.0 jumps around after I replaced the battery — it dropped from 80% to 55% in minutes without me doing anything

The fuel gauge IC stores calibration data from the old cell and uses it to estimate the new cell's charge state. That mismatch causes erratic percentage jumps, especially in the upper and lower thirds of the charge range. One full discharge-to-shutoff followed by an uninterrupted charge to 100% resets the IC's reference points against the new cell. After that single cycle, percentage readings stabilise.

The G Pad 8.0 feels warm while charging after the battery swap — is something wrong?

Warmth during the first few charge cycles on a new cell is normal. The charge IC on this tablet runs a conditioning pass on an unfamiliar cell, which slightly increases heat output compared to a broken-in battery. We measured surface temperatures on the bench during this phase and they stayed within the safe range for Li-Polymer chemistry. If the tablet becomes hot to the touch rather than just warm, or if warmth continues beyond the third full charge cycle, stop charging and check the connector seating at 3.7V nominal.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.