Welcome to our store. Proudly serving customers across North America for years. Learn more

For support or quotes: sales@batteryweb.com

WELCOME10
BatteryWeb

Amazon Fire HD 6 Replacement Battery 58-000092 3.7V 3400mAh

Up to 21% off
New arrival
Sale priceFrom $26.99 USD Regular price $33.99
Shipping calculated at checkout.
Replaces Amazon part 58-000092, 26S1006, and 26S1006-S for Fire HD 6 tablets.
3.7V, 3400mAh lithium-polymer cell restores full charge cycles on degraded Fire HD 6 packs.
Connector slides into the original battery slot with no modification or adhesive required.
We bench-tested this cell in a Fire HD 6 ST06; BMS accepted the pack on first insertion.
Run one full discharge to automatic shutoff then charge uninterrupted to 100% — resets fuel gauge calibration against the new cell.
Extended delivery time

Available by SPECIAL ORDER. Delivery for this product typically takes 2 weeks.

Extra Discount: As a thank you for your patience, enjoy an extra 5% off your order
EXTRAOFF

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

3400mAh

Amazon Fire HD 6 — 3.7V Li-Polymer Replacement Battery (58-000092)

This 3.7V, 3400mAh lithium-polymer battery replaces part number 58-000092 in the Amazon Fire HD 6 tablet. It fits the ST06 and PW98VM hardware variants, along with the Kindle Fire HD 6 and related models. Capacity figures come from the product specification — 12.58Wh total.

  • Fire HD 6 platform fit: The ST06 and PW98VM boards share the same 3.7V single-cell power rail, connector pinout, and BMS handshake protocol. One cell covers the full model range without voltage or communication mismatches.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on Fire HD 6 hardware. The BMS accepted the charge IC handshake without flags, and the protection circuit tripped correctly at the low-voltage cutoff threshold.
  • Fuel gauge recalibration after swap: After installation, run the tablet down to automatic shutoff, then charge uninterrupted to 100% without using the device. This forces the fuel gauge IC to map its reference points against the new cell and clears the inaccurate percentage readings that appear after a battery replacement.

Fire HD 6 shutting down between 15–25% remaining

This happens because the display backlight and active Wi-Fi together create a combined load spike that the degraded — or newly installed, uncalibrated — cell cannot sustain. The BMS reads the resulting voltage sag as a critical low-voltage condition and triggers a protective shutdown before the reported percentage reaches zero. The fix is a full recalibration cycle: discharge to automatic cutoff, then charge to 100% in one uninterrupted session. After one complete cycle the fuel gauge IC re-establishes accurate voltage-to-percentage mapping and the premature shutdowns stop.

Fire HD 6 reporting wrong battery percentage after replacement

The Fire HD 6 fuel gauge IC stores calibration data tuned to the original cell's charge curve. Swap the cell and that stored data no longer matches the new battery's actual voltage profile, so the percentage display drifts — often jumping or freezing at certain values. This is not a fault with the replacement cell. Run one full discharge to automatic shutoff followed by a continuous charge to 100% with the screen off. After that single cycle the gauge recalibrates and percentage accuracy returns to normal.

Compatible Models

Fire HD 6 ST06 Kindle Fire HD 6 PW98VM Fire Kids Edition Fire Kids 7" B00YYZCUGO Fire HD 6 8GB B00KC6I06S B00KC6IUO0 PW98VW Kindle Fire HD 6" 26S1006

Replaces Part Numbers

58-000092 26S1006 26S1006-S(1ICP4/84/82)

Technical Specifications

Voltage3.7V
Amp Hours3400mAh
Capacity3400mAh
Rate12.58Wh
Net Weight59g /2.08 oz
Gross Weight94g /3.32 oz
Approximate Weight94g /3.32 oz
Dimension 82.54 x 82.85 x 3.65mm

Product Highlights

  • Brand: Amazon
  • Manufacturer: CS
  • Series: X-Longer
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Fire HD 6 shows 40% then just switches off — is the new battery faulty?

The battery itself is not faulty. The fuel gauge IC is still calibrated to the old cell's voltage curve, so the percentage reading and the actual cell voltage are out of sync. Under combined screen and Wi-Fi load, the real voltage drops below the BMS cutoff threshold before the displayed number reaches zero. Run one full discharge to automatic shutoff, then charge uninterrupted to 100% — after that cycle the gauge recalibrates and the shutdowns stop.

Fast charging stopped working after I replaced the battery on my Fire HD 6 — what happened?

The Fire HD 6 charge IC negotiates the fast-charge protocol with the battery's BMS during the first accepted charge cycle. On a fresh replacement cell that negotiation has not happened yet, so the charger defaults to standard rate. Plug in using the original Amazon power adapter and let it complete one full, uninterrupted charge to 100%. After that initial cycle the charge IC recognises the new cell and fast-charge resumes at the normal rate.

The percentage on my Fire HD 6 drops really fast from 100% down to around 70%, then slows right down — is the capacity wrong?

This is fuel gauge drift, not a capacity issue. The gauge IC is reading voltage against calibration data set for the old cell, and the new cell's charge curve does not match that reference — so early percentage steps appear larger than they are. The cell is delivering its rated capacity; the reported numbers are just misaligned. Complete one full discharge to automatic shutoff followed by a continuous charge to 100%, and the IC will re-map the curve against the new cell's actual voltage profile.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.