Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Amazon Kindle S11S01A Compatible Battery 3.7V 1100mAh

Up to 20% off
New arrival
Sale priceFrom $27.99 USD Regular price $34.99
Shipping calculated at checkout.
Fits Amazon S11S01A, D00701, and D00701 WiFi Kindle models; replaces OEM part S11S01B.
3.7V 1100mAh lithium-ion cell delivers full charge cycles to restore read-time between charges.
Connector slides into the original slot with a single locking tab; no adapter required.
Bench testing shows the BMS accepts full charge within two hours via standard USB.
After installation, run a complete USB charge cycle before reading — Kindle firmware recalibrates battery display.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1100mAh

Amazon Kindle S11S01A / D00701 — 3.7V Li-ion Replacement Battery (S11S01B)

This is a 3.7V, 1100mAh Li-ion cell that fits the Amazon Kindle S11S01A, D00701, and D00701 WiFi e-readers. It replaces the original S11S01B battery when capacity has dropped and the device can no longer hold a useful charge. Dimensions are 65.54 × 53.20 × 4.96mm — measure your existing cell before ordering if you are unsure.

  • S11S01A and D00701 compatibility: Both models share the same physical footprint, connector pinout, and 3.7V voltage rail. The BMS on each device uses the same charge-termination handshake, so one cell covers the full group without modification.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on the S11S01A platform. The BMS accepted the cell cleanly, hit full charge termination at 4.2V, and the e-ink controller drew steady current with no BMS fault interruptions.
  • Post-swap charge cycle on Kindle firmware: After installing this cell, connect the Kindle via USB and charge it completely before switching it on. Kindle firmware reads the battery percentage from a coulomb counter that resets on cell swap — skipping the full charge cycle causes the percentage display to report incorrect figures from the first boot.

Kindle not powering on after battery swap

Replacement cells ship in storage mode — typically around 3.0V to 3.3V. The Kindle's boot sequence requires a minimum voltage on the battery rail before the processor will initialise. If the cell voltage sits below that threshold, the device shows nothing when you press the power button. Connect the USB charger immediately after installation and leave it for at least 10 minutes before attempting to power on. The charge circuit will raise the cell voltage into the boot window, and the Kindle will start normally from that point.

Battery percentage jumping or reading 0% right after a new cell

The Kindle's fuel gauge IC tracks charge state by counting current in and out of the cell over time. A brand-new cell has no history in that counter, so the reported percentage is effectively a guess until a full charge-to-discharge cycle completes. Percentage jumps of 20–30% in either direction are normal in the first few sessions. Run the device from 100% down to auto-shutdown at least once, then charge back to 100% — the firmware recalibrates the gauge to the actual cell capacity after that cycle.

Compatible Models

S11S01A D00701 D00701 WiFi B003B0A294563B74 kindle DX DXG

Replaces Part Numbers

S11S01B

Technical Specifications

Voltage3.7V
Amp Hours1100mAh
Capacity1100mAh
Rate4.07Wh
Net Weight28.2g /0.99 oz
Gross Weight53.2g /1.88 oz
Approximate Weight53.2g /1.88 oz
Dimension 65.54 x 53.20 x 4.96mm

Product Highlights

  • Brand: Amazon
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Kindle still won't turn on even after leaving the new battery connected to USB for 10 minutes — what's wrong?

If the cell shipped at a very low storage voltage (below 2.8V), the Kindle's charge IC may not recognise it as a valid cell and will not begin charging. Disconnect the USB cable, wait 30 seconds, then reconnect — this resets the charge controller handshake. If the Kindle still shows no response after another 15 minutes on USB, check that the connector is fully seated on the board; a half-inserted ribbon connector breaks the circuit entirely. A fully seated cell at 2.5V or above will begin charging within two minutes of a clean USB connection.

WiFi is draining this battery much faster than I expected — is the cell faulty?

The cell is not faulty. WiFi draw on these Kindle models runs significantly higher than e-ink display refresh alone — the wireless radio pulls enough current to reduce active use between charges noticeably compared to reading with WiFi off. The e-ink panel itself draws power only during a page turn, so a reading session with WiFi disabled is far lighter on the cell than one with sync active. If you are not actively downloading books, switch WiFi off in the quick settings menu and the difference in charge duration will be immediate and measurable.

Page turns are slow and the screen takes longer to refresh since I swapped the battery — is this normal?

Slow e-ink refresh is linked to low cell voltage during the first few charge cycles after a swap. The e-ink display controller requires a stable voltage boost to drive the electrophoretic particles across the screen — when voltage sags slightly under load, the refresh waveform takes longer to complete. Charge the Kindle fully to 4.2V (shown as 100% on screen) before heavy use. After two or three full charge cycles, the cell voltage stabilises under load and page-turn response returns to normal speed.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.