616-0206 Apple iPOD Photo Replacement Battery 3.7V 900mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
616-0206 Apple iPOD Photo Replacement Battery 3.7V 900mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
616-0206 Apple iPOD Photo Replacement Battery 3.7V 900mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
900mAh
Apple iPod Photo — 3.7V Li-ion Replacement Battery (616-0206)
This is a 3.7V, 900mAh Li-ion replacement battery for the Apple iPod Photo. It fits the iPod Photo 40GB (M9585LL/A, M9585ZR/A) and the iPod U2 20GB Color Display (MA127), along with 54 additional compatible models. OEM part number 616-0206 confirms fitment.
- iPod Photo and U2 Color Display compatibility: These models share the same 3.7V single-cell architecture, physical footprint, and connector pinout. The battery slots into the same bay with no modification to the connector or housing.
- Bench tested on actual hardware: We ran this cell through full charge and discharge cycles on iPod Photo hardware. The BMS held voltage within spec across the discharge curve and cut off cleanly at the low-voltage threshold without triggering a hard fault state.
- Post-swap initialisation on iPod Photo: After installing this battery, charge the device fully before powering it on. iPod Photo units frequently enter deep discharge protection after a cell swap, where the firmware holds the device in a low-current trickle state. Attempting to power on before that state clears causes the screen to stay dark even with a good battery seated.
Battery percentage jumping on iPod Photo after cell swap
The iPod Photo uses a voltage-threshold method to estimate charge level — it reads cell voltage and maps it to a percentage. A new cell has a slightly different voltage-to-capacity curve than the aged original it replaces. For the first several full charge and discharge cycles, the indicator recalibrates against the new curve, so jumps of 10–20% are normal. Run three complete cycles — charge to full, play until the device shuts off — and the display will stabilise.
Playback cutting out before the battery indicator reaches empty
The audio amplifier in the iPod Photo draws more current than the backlight or UI tasks. Near the end of a discharge cycle, cell voltage sags under that load even though the indicator still shows charge remaining. The device interprets the voltage drop as a low-battery fault and halts playback. This is not a defective battery — it is the BMS responding to a real voltage event. If this happens consistently, run a full discharge cycle to zero and recharge to 100% to let the firmware re-anchor its voltage thresholds at 3.0V cutoff.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Apple
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My iPod Photo won't turn on after sitting in a drawer for a year — new battery installed and still nothing
Extended storage drains cells below the BMS re-activation threshold, and the iPod Photo firmware holds the device in a locked low-current state until it sees enough voltage to proceed. Connect the original Apple USB charger and leave the device plugged in for at least 30 minutes before pressing any button. The screen will stay dark during trickle charge — that is expected. After 30 minutes, hold Menu and Centre simultaneously for 6 seconds to force a reset.
The iPod Photo charge indicator is jumping around — shows 80%, drops to 40%, then climbs back up
This happens because the iPod Photo maps cell voltage to a percentage, and a freshly installed cell has a voltage curve the firmware has not yet calibrated against. The jumps are not a fault — they are the device re-anchoring its reference points. Run three complete cycles: charge fully until the indicator shows 100%, then play audio continuously until the device shuts itself off. After the third cycle, the percentage display will track consistently.
Photo browsing drains the iPod Photo battery noticeably faster than music playback — is something wrong with the cell?
Nothing is wrong with the cell. The iPod Photo's display backlight draws significantly more current during photo browsing than the audio codec does during music-only playback. The LCD backlight is the largest single power draw on the board. This is normal hardware behaviour, not a battery fault. To extend playback between charges during photo use, reduce backlight brightness in Settings and set the backlight timer to the shortest available option.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






