Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Bang & Olufsen Beocom 5 Replacement Battery 3.7V 900mAh

Up to 21% off
New arrival
Sale priceFrom $22.99 USD Regular price $28.99
Shipping calculated at checkout.
Fits Bang & Olufsen Beocom 5 cordless phone handset, replaces OEM part number 3160585.
3.7V Li-ion cell rated 900mAh delivers consistent handset power across the DECT transmission band.
Connector slides vertically into the battery compartment beneath the handset with a single retention tab.
We cycled this cell through base-station charging and standby drain; BMS held voltage stable under transmit load.
After installation, place the handset in the base for a full 16-hour charge before first use—Li-ion cells in cordless phones need this slow initial charge to calibrate the base-station fuel gauge.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

900mAh

Bang & Olufsen Beocom 5 — 3.7V Li-ion Replacement Battery (3160585)

This is a 3.7V, 900mAh Li-ion replacement battery for the Bang & Olufsen Beocom 5 cordless DECT handset. It replaces OEM part number 3160585. The Beocom 5 is a single-handset cordless phone system, and this cell fits directly into the handset battery compartment.

  • Beocom 5 handset fit: The Beocom 5 uses a slim Li-ion cell at 3.7V to power both the DECT radio and the colour touchscreen. The 50.56 x 34.17 x 6.80mm footprint matches the original cell cavity. No modification needed.
  • Bench tested on actual hardware: We cycled this cell through the Beocom 5 charge circuit and confirmed the BMS accepted charge from the base station without triggering a fault state. Cell voltage held stable across standby and active DECT transmission loads.
  • First charge after install: Li-ion cells in DECT handsets often ship at partial state of charge. After fitting this battery, seat the handset in the base and allow a full uninterrupted charge cycle before use — this lets the Beocom 5 charge controller calibrate its end-of-charge detection correctly.

Talk time shorter than expected after fitting the new battery

Li-ion cells in low-draw devices like cordless phones can take two to three full charge-discharge cycles before the charge controller accurately tracks capacity. The Beocom 5 estimates remaining charge based on voltage curves it learned from the old, degraded cell. After a few cycles on the new battery, the controller recalibrates and talk time should reflect the rated 900mAh capacity.

Beocom 5 handset loses DECT pairing after battery replacement

Removing the battery completely cuts power to the handset's volatile memory. Some DECT handsets store pairing data in RAM-backed registers, and a full power loss clears them. If the Beocom 5 shows "searching" or fails to connect to the base after the swap, re-register the handset from the base station menu. The pairing procedure takes under two minutes and restores full operation.

Compatible Models

Beocom 5

Replaces Part Numbers

3160585

Technical Specifications

Voltage3.7V
Amp Hours900mAh
Capacity900mAh
Rate3.33Wh
Net Weight18.8g /0.66 oz
Gross Weight44g /1.55 oz
Approximate Weight44g /1.55 oz
Dimension 50.56 x 34.17 x 6.80mm

Product Highlights

  • Brand: Bang & Olufsen
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Beocom 5 is draining overnight even when it's sitting in the base — is that the new battery?

A new Li-ion cell has very low self-discharge, so overnight drain almost always points to a seating issue rather than the battery itself. If the handset is not fully seated in the base cradle, the charging contacts don't connect and the handset runs on battery the entire time. Remove the handset, clean the base charging pins with a dry cloth, and re-seat the handset until it clicks into position — the charge indicator should appear on screen within a few seconds.

The base station shows no charge light after I installed the replacement battery — what's wrong?

This happens when the replacement cell arrives at a voltage lower than the Beocom 5 base station's charge-acceptance threshold. The base expects to see a minimum cell voltage before it initiates the charge cycle. Leave the handset seated in the base for 30 minutes without touching it — most Li-ion charge controllers will attempt a trickle pre-charge to bring the cell up to acceptance voltage, after which the normal charge indicator should appear. If the cell is above 2.5V, this recovery process will complete on its own.

The Beocom 5 cuts out mid-call and reboots — could the battery be causing this?

Yes. During a DECT transmission burst, the radio draws a short spike of current. If the battery connections are not clean or fully seated, that spike causes a momentary voltage drop that the handset interprets as a low-battery shutdown. Remove the battery, check the gold contact pads on both the battery and the handset for debris or oxidation, and reseat firmly. If the problem stops after reseating, the contacts were the cause — not the cell capacity.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.