Criticon Pro 100 NIBP100 Replacement Battery 12V 7600mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Criticon Pro 100 NIBP100 Replacement Battery 12V 7600mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Criticon Pro 100 NIBP100 Replacement Battery 12V 7600mAh - is backordered and will ship as soon as it is back in stock.
Voltage
12V
Amp
7600mAh
Criticon Pro 100 Series — 12V Ni-MH Replacement Battery (NIBP100)
This is a 12V 7600mAh Ni-MH replacement battery for the Criticon Pro 100, Pro 200, Pro 300, and Pro 400 non-invasive blood pressure monitors. It replaces OEM part numbers NIBP100, BATT/110239, OM11187, MS633177C, and AS11187. Voltage, connector, and BMS communication match the original to allow the device to complete its power-on self-test sequence.
- Pro 100–400 platform compatibility: All four monitor variants share the same 12V battery bay, connector pinout, and BMS handshake protocol. One replacement cell fits the full range without wiring or adapter changes.
- Bench tested on actual hardware: We ran this cell through full charge-discharge cycles on a Pro 100 unit. The BMS accepted the cell on first insertion, completed self-test without fault, and held voltage within the monitor's accepted operating window across the full discharge curve.
- Post-swap self-test protocol: After installing this battery, allow the monitor to complete its full power-on self-test cycle without interruption. The device runs a BMS verification routine at startup. Interrupting it — by pressing buttons or cycling power — triggers a false battery fault flag that persists until the next clean reboot.
Why the Pro 100 fails its self-test after a battery swap
The Pro 100's BMS stores a charge-state reference from the previous cell. When a new battery is installed, that reference no longer matches the incoming voltage curve. The device interprets the mismatch as a fault condition and halts the self-test. Running one complete charge-discharge cycle lets the BMS recalibrate its reference against the new cell's actual chemistry. After that cycle, self-test clears and the unit returns to normal clinical operation.
Charge indicator stalling below 100% on the first charge
On the first charge after installation, the Pro 100's charge IC applies a conservative current limit against an unknown cell. This causes the indicator to stall — often between 85% and 95% — before the charge algorithm adjusts. The cell is not faulty. Allow the charge cycle to run to natural termination without removing the battery. By the second full charge, the charge IC will have profiled the cell and the indicator will reach 100% normally.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Criticon
- Manufacturer: CS
- Series: Standard
- Color: Blue
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The Pro 100 is alarming low battery immediately after a confirmed full charge — why?
The BMS compares incoming cell voltage against a threshold calibrated to the original OEM chemistry. A new Ni-MH cell has a slightly different resting voltage profile, so the monitor reads it as below threshold even when fully charged. Run one complete charge-discharge cycle and the BMS recalibrates its cutoff reference to match the new cell. After that cycle, the low battery alarm clears on a full charge.
The monitor won't power on after the replacement battery sat in storage — what's wrong?
Ni-MH cells self-discharge during storage, and if voltage drops far enough, the Pro 100's BMS locks out startup to protect the monitor's circuitry. Connect the charger and leave it undisturbed for a minimum of 90 minutes before attempting to power on. This allows the charge IC to bring the cell above the BMS recovery threshold — typically around 10.8V — before the startup sequence is attempted.
The Pro 100 shuts off mid-reading during the first few uses after fitting the new battery — is the cell failing?
No. Medical monitor load profiles stress new Ni-MH cells harder in the first 10 cycles because the cells haven't yet reached full electrochemical capacity. The BMS detects a brief voltage sag under the measurement load and triggers a protective cutoff. This settles after several full charge-discharge cycles as the cell's internal resistance drops. Run at least three complete cycles on the charger before returning the unit to clinical use.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.
-
Up to 19% offNew arrival
BatteryWeb
Escort Prism 20100 Replacement Battery 12V 2300mAh SLA
1.88 lb
Sale priceFrom $89.99 USD Regular price $110.99Unit priceIn stock (45 units) -
-
Up to 19% offNew arrival
BatteryWeb
Nihon Kohden ECG-9130K 12V Replacement Battery LCT-1912ANK
1.88 lb
Sale priceFrom $89.99 USD Regular price $110.99Unit priceIn stock (45 units) -
-
Up to 19% offNew arrival
BatteryWeb
Blaupunkt AX-262 Compatible Battery 12V 2300mAh
1.88 lb
Sale priceFrom $89.99 USD Regular price $110.99Unit priceIn stock (45 units) -
-
Up to 19% offNew arrival
BatteryWeb
GE Pro 1000 Replacement Battery 12V 7600mAh Ni-MH Y10SSC2000
2.44 lb
Sale priceFrom $134.99 USD Regular price $166.99Unit priceIn stock (75 units) -
-
Up to 19% offNew arrival
BatteryWeb
Nihon Kohden SB-150D ECG-1500 Replacement Battery 12V 3800mAh
1.23 lb
Sale priceFrom $85.99 USD Regular price $105.99Unit priceIn stock (63 units) -
-
Up to 19% offNew arrival
BatteryWeb
Nihon Kohden Cardiolife ECG-9320 Replacement Battery 12V 2900mAh LC-S2912NK
2.78 lb
Sale priceFrom $117.99 USD Regular price $145.99Unit priceIn stock (60 units) -
-
Up to 20% offNew arrival
BatteryWeb
Terumo TE-112 Infusion Pump Replacement Battery 7.2V 2000mAh
0.85 lb
Sale priceFrom $46.99 USD Regular price $57.99Unit priceIn stock (57 units) -
-
Up to 19% offNew arrival
BatteryWeb
Smiths WZ50F6 12V Replacement Battery 200AAH10YMLZ Ni-MH
0.83 lb
Sale priceFrom $50.99 USD Regular price $62.99Unit priceIn stock (51 units) -
