eMachines D525 Replacement Battery 11.1V 8800mAh AS07A32
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
eMachines D525 Replacement Battery 11.1V 8800mAh AS07A32 - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
eMachines D525 Replacement Battery 11.1V 8800mAh AS07A32 - is backordered and will ship as soon as it is back in stock.
Voltage
11.1V
Amp
8800mAh
eMachines D525 / D725 — 11.1V Li-ion Replacement Battery (AS07A32)
This 11.1V, 8800mAh Li-ion battery replaces the original cell in the eMachines D525 and D725 laptops. It matches the OEM voltage rail and connector, restoring untethered use to a machine that's stopped holding charge. Capacity figure is 97.68Wh — confirmed against the product data, not the web listing.
- D525 and D725 share the same battery platform: Both models run the same 11.1V three-cell architecture and use identical OEM part numbers across the AS07A series. The BMS handshake and connector pinout are the same on both, so one replacement cell covers either unit without modification.
- Bench tested on actual hardware: We cycled this cell through charge and full discharge on the D525 chassis. The BMS held cutoff correctly at both ends, and the protection circuit tripped as expected on overcurrent. No thermal event on charge.
- Post-swap calibration on the D525: After installing, run one full discharge to hibernate cutoff, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap on this platform.
Why the D525 BIOS flags the replacement cell as poor health immediately after install
The D525 BIOS reads health data from the battery's EEPROM on first contact. The replacement cell's EEPROM starts with factory defaults that don't match the charge history the BIOS expects. That mismatch triggers a false "poor health" or "consider replacing" flag before a single cycle has run. Running the battery learn cycle — full discharge to hibernate, then uninterrupted charge to 100% — pushes the BIOS to recalculate health against real cycle data. After two or three full cycles, the flag clears on most D525 units.
D525 shutting down at 20–30% charge shown on screen
This is a voltage cliff, not a faulty cell. Under combined CPU and display load, the cell voltage drops faster than the fuel gauge IC can track. When the real cell voltage hits the BMS low-cutoff threshold, the system shuts off — even though the OS gauge still shows 20–30%. The fuel gauge IC needs calibration cycles against the new cell chemistry before its readings are accurate. Run two full discharge-to-hibernate and charge-to-100% cycles. After that, the shutdown and the displayed percentage should align within a few percent.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: eMachines
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The D525 shows 0% and says "plugged in, not charging" right after I put this battery in — is the cell dead?
It's not dead. The BIOS has read the replacement cell's EEPROM and found no recognised charge history, so it defaults to 0% and holds the charge circuit open as a precaution. Remove the AC adapter, hold the power button for 15 seconds with no battery installed, then reseat the battery and reconnect AC. If the charging LED doesn't come on within two minutes after that reset, check the connector pins for bent contacts on the battery tray.
My D525 shows this battery as 58Wh in system info, but the listing says 97.68Wh — which is right?
The 97.68Wh figure from the product data is the actual cell chemistry rating. The lower number your system reports comes from the EEPROM on the replacement cell — it stores a rated Wh value that the previous OEM programmed, and the OS reads that stored value, not the physical capacity. Run two full calibration cycles and the reported figure will update as the fuel gauge IC maps real charge data to the new cell. The discrepancy is an EEPROM read, not a capacity fault.
Why does the D525 battery gauge jump around wildly — showing 75%, then 40%, then 60% within minutes?
The fuel gauge IC on the D525 mainboard uses stored discharge curve data from the old cell to estimate state of charge. A new cell has a different discharge curve, so the IC's estimates are wrong until it builds its own baseline. This erratic jumping is normal for the first two to three full cycles. Let the battery discharge fully to hibernate cutoff twice, charging to 100% each time, and the gauge will stabilise as the IC recalibrates against the actual cell behaviour.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
