Gigabyte Q1732N Replacement Battery 11.1V 4400mAh
Available by SPECIAL ORDER. Delivery for this product typically takes 2 weeks.
EXTRAOFF
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Gigabyte Q1732N Replacement Battery 11.1V 4400mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Gigabyte Q1732N Replacement Battery 11.1V 4400mAh - is backordered and will ship as soon as it is back in stock.
Voltage
11.1V
Amp
4400mAh
Gigabyte Q1732N — 11.1V Li-ion Replacement Battery
This 11.1V 4400mAh (48.84Wh) lithium-ion battery replaces the original cell in the Gigabyte Q1732N notebook. It fits the compact ultrabook-class chassis and restores full cordless operation when the original cell no longer holds a usable charge. Voltage and connector match the factory specification.
- Q1732N platform fit: The Q1732N uses an 11.1V three-cell Li-ion pack with a specific connector pinout and BMS communication line. This replacement matches that voltage rail and pin layout so the system board recognises the pack on first boot.
- Bench tested on actual hardware: We cycled this cell through charge and discharge on the bench, confirming BMS handshake, accurate state-of-charge reporting, and stable voltage delivery under load. No cutoff faults triggered during testing.
- First-cycle calibration on the Q1732N: After fitting this battery, run the laptop down to hibernate cutoff under normal use, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the false health warning that appears after every cell swap on this platform.
BIOS reporting poor battery health immediately after fitting the new cell
The Q1732N BIOS reads health data stored in the old cell's EEPROM and compares it against the new pack. When you swap cells, that stored data is gone and the BIOS flags the battery as degraded or unknown. This is a firmware artefact, not a fault with the replacement cell. Run one full discharge-to-hibernate followed by an uninterrupted charge to 100% — the BIOS learn cycle rewrites the health register and the warning clears.
Laptop shuts down while the gauge still shows 20–25% charge
This happens when the fuel gauge IC has not yet calibrated against the new cell's actual chemistry. The IC carries over voltage-to-capacity mapping from the old, degraded cell, so it misreads the remaining charge at the low end of the curve. Under combined CPU and display load, voltage drops faster than the gauge expects, and the system hits the hardware undervoltage cutoff before the displayed percentage reaches zero. Complete two full discharge-to-hibernate and charge-to-100% cycles — the fuel gauge IC recalibrates its mapping and shutdown at false percentages stops.
Compatible Models
Technical Specifications
Product Highlights
- Brand: Gigabyte
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
Why does Windows show the new battery's capacity as lower than the 48.84Wh listed on the product page?
Windows reads Wh data from the cell's EEPROM, which stores the rated figure the manufacturer programmed at the factory — this can differ slightly from the actual measured chemistry of a replacement cell. The discrepancy is an EEPROM reporting difference, not a sign the cell is underperforming. After two full calibration cycles, the fuel gauge IC builds its own capacity map from real charge data, and the reported figure stabilises. Check the value again after those two cycles before drawing any conclusions.
The Q1732N stops charging at around 80% and the charge light goes off — is the replacement cell faulty?
This is almost always a BIOS-controlled charge limit, not a cell fault. Some Gigabyte firmware versions enable a battery conservation mode that caps charging at 80% to reduce long-term cell stress — the setting is active by default on certain builds. Go into the BIOS or Gigabyte's power management utility and look for a "Battery Health Mode" or charge limit toggle and disable it. Once turned off, charge the laptop to confirm it reaches 100%.
After fitting the replacement, the battery percentage jumps around erratically for the first few uses — what causes that?
The fuel gauge IC inside the Q1732N had its calibration data tied to the old cell's specific voltage curve. With a new cell installed, the IC is mapping charge state against chemistry it has not seen before, so readings are unstable early on. This is normal for the first two to three cycles. Run the laptop down to hibernate cutoff twice in a row, charging fully to 100% each time, and the gauge IC recalibrates — readings will steady at around 11.1V full charge.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




