Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Globus Genesy 3000 Replacement Battery 12V 2000mAh

Up to 20% off
New arrival
Sale priceFrom $65.99 USD Regular price $81.99
Shipping calculated at checkout.
Fits Globus Genesy 3000, Laser Pro, LaserVet Pro, and StimVet 4000 units; replaces OEM part PBT MH0090.
12V 2000mAh Ni-MH delivers consistent power output for electrotherapy stimulation cycles without voltage sag during treatment delivery.
Connector seats into the battery compartment slot with a positive terminal contact orientation; locking tab engages on insertion.
We bench-tested the cell across full charge-discharge cycles on the Genesy 3000 platform; BMS initialized without fault codes and held voltage stable under therapeutic load.
After installation, allow the device to complete its power-on self-test cycle without interruption — medical devices run verification at startup, and interrupting causes a false battery fault that persists until the next full reboot.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

12V

Amp

2000mAh

Globus Genesy 3000 Series — 12V Ni-MH Replacement Battery (PBT MH0090)

This is a 12V 2000mAh Ni-MH replacement battery for the Globus Genesy 3000 electrotherapy platform. It fits the Genesy 3000, Laser Pro Version, LaserVet Pro Version, and StimVet 4000. All four units share the same battery bay, connector, and BMS communication profile.

  • Genesy 3000 platform compatibility: The Genesy 3000, Laser Pro, LaserVet Pro, and StimVet 4000 share a common 12V Ni-MH battery rail with the same physical connector and BMS handshake. One battery fits all four without modification.
  • Bench tested on actual hardware: We ran this cell through full charge-discharge cycles on the Genesy 3000 platform. The BMS accepted the new cell, completed its verification sequence, and reported accurate state-of-charge across all test cycles.
  • Post-swap startup protocol: After fitting the new battery, let the device complete its full power-on self-test without interrupting it. The Genesy 3000 BMS runs a cell verification check at boot — cutting power mid-sequence stores a false battery fault that persists until the next full reboot.

Why the Genesy 3000 alarms low battery on a confirmed full charge

The Genesy 3000 BMS sets its low-battery threshold against the OEM cell's charge curve. A fresh Ni-MH cell has a slightly different internal resistance profile than a broken-in one, so the BMS reads voltage conservatively on the first two or three cycles. The alarm clears once the cell completes one full charge-discharge cycle and the BMS recalibrates its threshold. Run one complete cycle before clinical use — charge to full, run the unit through a normal session, then charge again.

Device will not power on after battery sat in storage

Ni-MH cells self-discharge over time. If the battery has been stored for several months, its resting voltage can drop below the BMS recovery threshold — typically around 10.5V on a 12V Ni-MH pack — and the device will not boot. Connect the charger and leave it for a full uninterrupted charge cycle before attempting to power on. If the charge indicator does not respond after 30 minutes on the charger, disconnect, wait two minutes, then reconnect to allow the charge IC to attempt a low-current recovery pulse.

Compatible Models

Genesy 3000 Laser Pro Version LaserVet Pro Version StimVet 4000

Replaces Part Numbers

PBT MH0090

Technical Specifications

Voltage12V
Amp Hours2000mAh
Capacity2000mAh
Rate24Wh
Net Weight276g /9.74 oz
Gross Weight311g /10.97 oz
Approximate Weight311g /10.97 oz
Dimension 113.00 x 64.30 x 16.70mm

Product Highlights

  • Brand: Globus
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Genesy 3000 is showing a low battery warning straight after a full charge — is the new battery faulty?

Not faulty. The Genesy 3000 BMS calibrates its low-battery threshold against the OEM cell's charge curve, and a brand-new Ni-MH cell reads slightly differently until it breaks in. Run one complete charge-discharge cycle — charge fully, use the device through a normal session, then charge again. After that cycle the BMS recalibrates and the warning clears.

The device shuts off mid-treatment after fitting the new battery — what is causing this?

Medical electrotherapy devices apply a variable load profile during stimulation programs, and new Ni-MH cells have higher internal resistance in the first ten cycles. This causes momentary voltage sag under load that triggers the BMS protection cutoff. The shutdowns become less frequent with each cycle as the cell's internal resistance drops. Complete five full charge-discharge cycles before using the device in a clinical setting.

The charge indicator on the Genesy 3000 is not reaching 100% on the first charge — should I keep charging?

This is normal on the first charge. The charge IC applies a conservative current limit when it sees a new cell, which means the charge cycle runs longer and the indicator may plateau below 100% before the IC completes its top-up phase. Leave the device on charge until the indicator stops advancing on its own — do not disconnect early. After the first full cycle the indicator will reach 100% consistently.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.