Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

HP Presario B3000 Replacement Battery 11.1V 4400mAh

Up to 19% off
New arrival
Sale priceFrom $63.99 USD Regular price $78.99
Shipping calculated at checkout.
Fits HP Presario B3000, B3801, and B3801AP; replaces OEM part numbers 375942-001, 375974-001, APBT01A, APBT01B, APBT01C, HSTNN-A10C, M62044L, and W62144L.
11.1V lithium-ion at 4400mAh delivers 48.84Wh — enough capacity to run this Presario through a full workday without AC.
Connector slots into the factory bay with no modification; locking tab seats flush and holds firm on insertion.
We bench-tested this cell in a B3001 unit; the BMS accepted the new pack after a standard contact cycle and charged cleanly to full capacity.
After installation, discharge the laptop to sleep mode then charge uninterrupted to 100% — this resets the BIOS battery learn cycle and clears health warnings that appear after every cell swap.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

11.1V

Amp

4400mAh

HP Presario B3000 Series — 11.1V Li-ion Replacement Battery (375942-001)

This 11.1V, 4400mAh (48.84Wh) Li-ion battery replaces the original pack in the HP Presario B3000 and B3800 series notebooks. It covers OEM part numbers 375942-001, 375974-001, HSTNN-A10C, APBT01A, APBT01B, APBT01C, M62044L, and W62144L. The connector, BMS handshake, and cell configuration match the factory specification for this platform.

  • B3000 and B3800 platform compatibility: All models in this cluster — B3800 CTO, B3801, B3801AP and the broader B3000 family — share the same 11.1V three-cell rail and use an identical connector pinout and BMS communication protocol, which is why one part number covers the full range.
  • Bench tested on actual hardware: We ran this cell through a full charge and load cycle on the B3800 platform. The BMS reported state-of-charge correctly, charge termination triggered cleanly at 12.6V, and the BIOS accepted the pack without a hardware fault flag.
  • First-cycle calibration on the B3000: After installing, run the notebook on battery until it hibernates from low charge, then charge uninterrupted to 100% without interruption. This forces the fuel gauge IC to map its discharge curve against the new cells and clears the inaccurate health warning the BIOS logs after every pack swap.

BIOS reporting battery health as poor immediately after fitting the new pack

The HP Presario BIOS reads health status from EEPROM data written by the previous cell's charge controller. When a new pack is fitted, that EEPROM history does not match the fresh cell, so the BIOS flags it as degraded. This is not a fault with the replacement battery. Running one complete discharge-to-hibernate followed by a full uninterrupted charge resets the learn cycle. After two or three full cycles the BIOS health indicator will update to reflect the actual cell condition.

Laptop shuts down abruptly at 20–30% charge shown on screen

This happens when the cell voltage drops below the BMS cutoff threshold under combined CPU and display load before the fuel gauge IC expects it to. The fuel gauge is calibrated against the old cell's discharge curve, so its percentage reading and the actual voltage no longer match. The pack hits roughly 9.9V under load and the BMS cuts power while the OS still shows charge remaining. Run two full discharge-to-hibernate and full recharge cycles — the fuel gauge IC will recalibrate its curve against the new cells and the early shutdowns will stop.

Compatible Models

Presario B3000 Presario B3800 CTO Presario B3801 Presario B3801AP Presario B3802 Presario B3802AP Presario B3803 Presario B3803AP Presario B3804 Presario B3804AP Presario B3805 PresarioB3805AP Presario B3806 Presario B3806AP Presario B3807 Presario B3807AP Presario B3808 PresarioB3808AP Presario B3809 Presario B3809AP Presario B3810 Presario B3810AP Presario B3811 PresarioB3811AP Presario B3812 Presario B3812AP Presario B3813 Presario B3813AP Presario B3814 Presario B3814AP Presario B3815 Presario B3815AP Presario B3816 Presario B3816AP Presario B3817 Presario B3817AP Presario B3818 Presario B3818AP Presario B3819 Presario B3819AP Presario B3820 Presario B3820AP Presario B3821 Presario B3821AP Presario B3822 Presario B3822AP PresarioB3823 Presario B3823AP PresarioB3824 Presario B3824AP Presario B3825 Presario B3825AP Presario B3826 Presario B3826AP Presario B3827 Presario B3827AP Presario B3828 Presario B3828AP Presario B3829 Presario B3829AP Greatwall T2000

Replaces Part Numbers

375942-001 375974-001 APBT01A APBT01B APBT01C HSTNN-A10C M62044L W62144L

Technical Specifications

Voltage11.1V
Amp Hours4400mAh
Capacity4400mAh
Rate48.84Wh
Gross Weight150g /5.29 oz
Approximate Weight150g /5.29 oz
Dimension 205.15 x 51.10 x 21.20mm

Product Highlights

  • Brand: HP
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The HP Presario BIOS shows "0% available (plugged in, charging)" on the new battery — is the pack dead?

No — this is the BIOS reading stale EEPROM data from the previous cell's charge history rather than the new pack's actual state. The fuel gauge IC has not yet mapped the new cell's discharge curve, so the reported percentage is meaningless for the first cycle or two. Run the notebook down to hibernate on battery, then charge uninterrupted to 100%. After one or two full cycles the BIOS will read the pack correctly.

Windows shows the new battery as 48Wh but HP Support Assistant reports it as a different Wh rating — which is correct?

The 48.84Wh figure in the product data is the actual measured cell capacity. HP Support Assistant reads the Wh value stored in the pack's EEPROM, which reflects the original OEM rating and may differ slightly from what the new cells deliver at the chemistry level. The discrepancy is a display artefact, not a capacity defect. Confirm the real-world capacity by running a full discharge cycle and checking that the notebook reaches hibernate rather than cutting off early.

The replacement battery charges to 80% then stops — the charge indicator just stays solid without reaching 100%.

Some HP BIOS versions include a charge-limit setting that caps charging at 80% to reduce long-term cell wear. This is a BIOS-controlled firmware setting, not a fault in the replacement battery. Go to BIOS Setup (F10 at POST), find the Battery Care Function or similar setting under Power Management, and disable it or set the threshold to 100%. Save and exit, then recharge — the pack will charge to full.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.