Huawei Watch GT4 41mm Replacement Battery HB572727EFW 490mAh
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Huawei Watch GT4 41mm Replacement Battery HB572727EFW 490mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Huawei Watch GT4 41mm Replacement Battery HB572727EFW 490mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.87V
Amp
490mAh
Huawei Watch GT4 41mm — 3.87V Li-Polymer Replacement Battery (HB572727EFW)
This 490mAh (1.9Wh) Li-Polymer cell is a direct replacement for the Huawei Watch GT4 41mm. It restores power to the display, heart rate sensor, GPS, and BLE radio when the original cell has degraded or failed to hold a charge. Voltage matches the watch's 3.87V power rail exactly.
- GT4 41mm platform fit: The 41mm GT4 uses a smaller chassis than the 46mm variant, with a distinct cell footprint of 25.60 × 25.00 × 5.40mm. The HB572727EFW matches that footprint. Fitting a 46mm cell here will not work — the connector pitch and cell dimensions differ.
- Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the GT4 41mm platform. The BMS accepted the cell without error flags, and the fuel gauge IC registered correctly after a full charge cycle from near-zero.
- Fuel gauge calibration after swap: Place the watch on its magnetic charger immediately after fitting this cell and charge to 100% before first use. The fuel gauge IC on this platform loses its reference point when the original cell is removed. Without a full charge cycle from near-zero, the gauge will report inaccurate percentages for days.
BLE session loss after battery removal on the GT4 41mm
Cutting power to the GT4 41mm during a cell swap drops the active Bluetooth session stored in the watch's memory. The watch does not automatically re-establish pairing with the phone — it treats itself as a new device. Open the Huawei Health app, navigate to device settings, remove the watch, then re-pair it from scratch. The watch MAC address stays the same, so health data and settings stored in the app are not lost.
Watch shows 0% and will not power on immediately after swap
This is a fuel gauge IC issue, not a faulty cell. When the original battery is disconnected, the IC loses its charge reference and defaults to 0%. The watch may refuse to boot because it reads the battery as critically empty, even though the new cell has residual charge. Place it on the charger for at least 15 minutes until the display shows a charging indicator, then allow it to reach 100% before use. Do not attempt a hard reset until the gauge has completed one full charge cycle from below 5%.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Huawei
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My GT4 41mm charges to 100% but drains completely within a day — why is this new battery going flat so fast?
Always-on display combined with continuous heart rate monitoring is the primary draw on this platform — together they can pull the 490mAh cell down in under 24 hours. Check whether AOD and 24/7 HR tracking are both active simultaneously in the Huawei Health app. Turn AOD off or set HR monitoring to intervals rather than continuous, and multi-day battery life will return. If drain persists after that, check that a background GPS workout session was not left running after the swap.
The magnetic charger is sitting on the watch but the charging icon never appears after I replaced the battery — what's wrong?
The most common cause is the charge contacts shifting slightly during reassembly. Remove the watch from the charger, rotate it 90 degrees, and reseat it — you should feel the magnet pull it into alignment. Clean both the charger puck contacts and the watch contacts with a dry cloth before reseating. If the icon still does not appear, check that the battery connector is fully clicked down on the board, as a half-seated connector will break the charge circuit entirely.
Heart rate and GPS seem to drain this replacement cell noticeably faster than they did on my old battery in week one — is the cell defective?
This is normal behaviour for the first five to seven days after a cell swap. The new cell's internal impedance is higher before it has been through several full charge and discharge cycles, which means the BMS draws slightly more from the cell under sensor load to maintain the voltage rail. After three to five full cycles, impedance drops and drain rates normalise. Track drain over a week — if it has not improved after seven days and five full cycles, check that the HR sensor lens is clean, as a dirty lens causes the sensor to increase polling frequency to compensate.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




