Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

LeapFrog LeapPad Platinum Compatible Battery 3.7V 3200mAh

Up to 20% off
New arrival
From $28.99 USD $35.99
Shipping calculated at checkout.
Fits LeapFrog LeapPad Platinum Kids Learning tablet, replaces MLP4063112, 800-10067, MP5461110.
3.7V 3200mAh lithium-polymer cell delivers 11.84Wh — restores full charge cycles on the seven-inch touchscreen.
Connector seats flat against the internal dock with a single locking tab; orientation marked on housing.
We bench-tested the cell across five full charge cycles; BMS accepted the new pack without fault codes.
After installation, run one complete discharge to automatic shutoff then charge uninterrupted to 100% — this resets the fuel gauge calibration and eliminates the inaccurate percentage display common after a battery swap.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Please Confirm Delivery Timeline

Fresh Battery, Worth the Wait

To provide the highest-quality replacement battery, we ship this battery directly from the manufacturer rather than from aging warehouse inventory. This means delivery may take a little longer, but it helps ensure you receive a fresh battery with better performance, a longer lifespan, and greater reliability.

Estimated delivery: 7–10 business days
4.8
★★★★★
★★★★★
Average Customer Rating
By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

3.7V

Amp

3200mAh

LeapFrog LeapPad Platinum / XDi Ultra — 3.7V Li-Polymer Replacement Battery (MLP4063112)

This 3.7V 3200mAh (11.84Wh) Li-Polymer cell replaces the original battery in the LeapFrog LeapPad Platinum Kids Learning tablet, the XDi Ultra, and the LeapPad 31565. It fits the standard Platinum 7" form factor. The cell matches OEM part numbers MLP4063112, 800-10067, and MP5461110.

  • LeapPad Platinum and XDi Ultra compatibility: These models share the same 3.7V single-cell Li-Polymer architecture, connector pinout, and BMS handshake logic. The same 112.10 × 62.20 × 4.60mm cell footprint runs across this entire platform revision.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on a LeapPad Platinum unit. The BMS accepted the new cell without error flags, held the charge rail steady under combined display and WiFi load, and reported state of charge without cutoff anomalies.
  • Fuel gauge recalibration after swap: After installing this battery, run one full discharge to automatic shutoff, then charge uninterrupted to 100%. The LeapPad's fuel gauge IC calibrated against the old cell — this single cycle resets it against the new one and clears the inaccurate percentage readings that appear immediately after a swap.

LeapPad Platinum shutting down at 15–25% remaining

When the display, WiFi radio, and active app load all draw simultaneously, the cell voltage drops sharply at low state of charge. The BMS reads this voltage cliff as a critically low threshold and triggers an emergency cutoff before the percentage counter reaches zero. This is a fuel gauge calibration mismatch, not a fault in the replacement cell. Run one full discharge-to-shutoff cycle followed by an uninterrupted charge to 100% — after one complete cycle the fuel gauge recalibrates and the early shutdown stops.

LeapPad percentage dropping faster than expected from 100%

The LeapPad's fuel gauge IC stored capacity data from the old, degraded cell. Against a new 3200mAh cell it reads drain rate incorrectly, causing the percentage to fall faster in the first quarter of charge than it should. This is not a defect in the replacement battery — it is a calibration drift issue. One full discharge to automatic shutoff followed by a continuous charge to 100% forces the fuel gauge to relearn the new cell's capacity curve and corrects the drop rate.

Compatible Models

LeapPad Platinum Kids Learning XDi Ultra LeapPad 31565 Platinum 7"

Replaces Part Numbers

MLP4063112 800-10067 MP5461110

Technical Specifications

Voltage3.7V
Amp Hours3200mAh
Capacity3200mAh
Rate11.84Wh
Net Weight62.2g /2.19 oz
Gross Weight97g /3.42 oz
Approximate Weight97g /3.42 oz
Dimension 112.10 x 62.20 x 4.60mm

Product Highlights

  • Brand: LeapFrog
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The LeapPad Platinum shows 100% as soon as I plug it in, but it dies within minutes of unplugging — is the new battery faulty?

The battery is not faulty. The LeapPad's fuel gauge IC was calibrated to the old, depleted cell, so it reads a full new cell as 100% but has no accurate data on its actual capacity curve. Run the tablet down to automatic shutoff on a full charge, then charge it uninterrupted to 100% without using it. After that single cycle the fuel gauge relearns the new cell and the readings stabilise.

The LeapPad is warm on the back while charging the new battery — should I stop charging?

Mild warmth at the back during charging is normal with a new Li-Polymer cell. The charge IC runs a slightly higher absorption current on a new cell during its first few cycles until the cell's internal resistance settles. If the tablet is too hot to hold comfortably or shows an on-screen warning, disconnect it — but gentle warmth with no warning is expected and clears after the first two or three full charge cycles.

After fitting the replacement battery, the LeapPad won't charge past around 80% — it just sits there.

This is the charge IC entering a hold state because the new cell's voltage curve doesn't yet match the profile the controller expects from the previous cell. Disconnect the charger, power the tablet off completely, then reconnect the charger with the tablet off. This clears the charge controller's state and lets it restart the charge algorithm from the correct voltage reference — the cell should then climb to 100%.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

LeapFrog LeapPad Platinum Kids Learning Replacement Battery, 3.7V, 3200mAh, Li-Polymer 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections