Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Lenovo IdeaPad 100S-14IBR Compatible Battery 7.6V 4100mAh

Up to 19% off
New arrival
Sale priceFrom $100.99 USD Regular price $124.99
Shipping calculated at checkout.
Fits Lenovo IdeaPad 100S-14IBR laptop; replaces OEM part 0813002, 5B10K65026, NC140BW1-2S1P.
7.6V, 4100mAh Li-Polymer cell delivers 31.16Wh to sustain this ultraportable through full workday cycles.
Connector seats flat against motherboard slot with single retention tab; no forced insertion required.
We bench-tested this cell on IdeaPad 100S hardware; BMS powered on without fault codes and held voltage steady under CPU load.
After installation, discharge fully to system hibernation then charge uninterrupted to 100% — this resets the BIOS battery learn cycle and clears inaccurate health warnings that appear after every cell swap.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Please Confirm Delivery Timeline

Fresh Battery, Worth the Wait

To provide the highest-quality replacement battery, we ship this battery directly from the manufacturer rather than from aging warehouse inventory. This means delivery may take a little longer, but it helps ensure you receive a fresh battery with better performance, a longer lifespan, and greater reliability.

Estimated delivery: 7–10 business days
4.8
★★★★★
★★★★★
Average Customer Rating
By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

7.6V

Amp

4100mAh

Lenovo IdeaPad 100S-14IBR — 7.6V Li-Polymer Replacement Battery (0813002)

This is a 7.6V, 4100mAh (31.16Wh) Li-Polymer battery for the Lenovo IdeaPad 100S-14IBR 14-inch notebook. It replaces OEM part numbers 0813002, 5B10K65026, and NC140BW1-2S1P. Fit covers the 80R9 series variants, including the 80R9002WGE and 80R90031PH builds.

  • IdeaPad 100S-14IBR 80R9 series compatibility: All 80R9 variants share the same 7.6V two-cell Li-Polymer architecture, identical connector pinout, and the same BMS handshake protocol. Swapping between sub-models carries no electrical risk — the BMS negotiation is identical across the full 80R9 range.
  • Bench tested on actual hardware: We cycled this cell through charge, discharge, and suspend-resume on an IdeaPad 100S-14IBR unit. The BMS accepted the cell without fault codes, and charge current ramped normally from bulk to trickle at the correct voltage threshold.
  • Post-install recalibration step: After fitting, run the laptop down to hibernate cutoff on battery only, then charge uninterrupted to 100%. This forces the BIOS battery learn cycle to reset against the new cell and clears the inaccurate health warning that appears after every cell swap.

BIOS reporting poor battery health immediately after replacement

The IdeaPad 100S-14IBR stores battery health data in EEPROM on the old cell. When a new cell goes in, the BIOS reads stale EEPROM values and flags the battery as degraded before it has run a single cycle. This is a data mismatch, not a cell fault. Running one full discharge-to-hibernate followed by a full uninterrupted charge resets the learn cycle. After two to three full cycles, the BIOS recalculates health against real cell data and the warning clears.

Laptop shutting down at 20–30% charge shown on screen

This happens when the fuel gauge IC has not yet calibrated against the new cell's actual voltage curve. The gauge reports 25% remaining, but the cell voltage has already dropped below the minimum load threshold under combined CPU and display draw. The laptop shuts down to protect the cell — not because the battery is faulty. Run two full discharge-to-hibernate cycles without interruption. After calibration, the fuel gauge tracks the real voltage cliff and the OS percentage reading aligns with actual charge state.

Compatible Models

IdeaPad 100S-14IBR IdeaPad 100S-14IBR 80R9 IdeaPad 100S-14IBR(80R9002WGE) IdeaPad 100S-14IBR(80R90031PH) IdeaPad 100S-14IBR(80R90050GE) IdeaPad 100S-14IBR(80R90051GE) IdeaPad 100S-14IBR(80R9005MPB) IdeaPad 100S-14IBR(80R9006KPH) IdeaPad 100S-14IBR(80R900BCAU) IdeaPad 100S-14IBR(80R900BEGE) IdeaPad 100S-14IBR(80R900FJGE) IdeaPad 100S-14IBR(80R900HXGE) IdeaPad 100S-14IBR(80R900HYGE) IdeaPad 100S-14IBR(80R900JLPG) IdeaPad 100S-14IBR(80R900K5GE) IdeaPad 100S-14IBR(80R900KDSB) IdeaPad 100S-14IBR(80R900NUMH) IdeaPad 100S-14IBR(80R900NVGE) Ideapad 100S-14IBR 80R90058AU Ideapad 100S-14IBR 80R90059AU Ideapad 100S-14IBR 80R900F5AU Ideapad 100S-14IBR 80R900K6AU Ideapad 100S-14IBR 80R900LLAU Ideapad 100S-14IBR(80R9003MSP) Ideapad 100S-14IBR(80R900FXUS)

Replaces Part Numbers

0813002 5B10K65026 NC140BW1-2S1P

Technical Specifications

Voltage7.6V
Amp Hours4100mAh
Capacity4100mAh
Rate31.16Wh
Net Weight165g /5.82 oz
Gross Weight425g /14.99 oz
Approximate Weight425g /14.99 oz
Dimension 299.10 x 92.00 x 4.80mm

Product Highlights

  • Brand: Lenovo
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

Why does my IdeaPad 100S-14IBR show the new battery as "0%" or "unknown" right after I installed it?

The fuel gauge IC on the IdeaPad 100S-14IBR reads EEPROM data written by the original cell. A fresh cell has no matching EEPROM history, so the OS reports 0% or unknown until the gauge calibrates. Plug in immediately after fitting and let it charge uninterrupted to 100% without booting into Windows mid-charge. After one full charge-discharge cycle, the fuel gauge IC maps the new cell's voltage curve and the percentage display stabilises.

The system information screen shows the wrong Wh rating for this battery — is the cell faulty?

The Wh value shown in Lenovo Vantage or Windows Device Manager is pulled from the cell's EEPROM, which stores the rated capacity of the original OEM cell. The replacement cell's actual chemistry may differ slightly from that stored value, so the reported Wh figure can be off until the BIOS learn cycle completes. This is an EEPROM data difference, not a cell defect. Run a full discharge to hibernate cutoff, then a full uninterrupted charge to 100%, and the reported Wh will update to reflect the new cell.

New battery installed but charge stops and won't go above 80% — what's happening?

The IdeaPad 100S-14IBR BIOS includes a battery charge threshold setting that caps charging at 80% to reduce cell wear. Check Lenovo Vantage under Power — if "Battery Charge Threshold" is enabled, it will hold the charge at whatever upper limit is set. Disable the threshold or raise the upper limit to 100%. If Vantage is not installed, the setting can also be toggled in the BIOS under Config → Power.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.