Lenovo ThinkPad X390 Yoga 02DL021 Replacement Battery 11.52V
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Lenovo ThinkPad X390 Yoga 02DL021 Replacement Battery 11.52V - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Lenovo ThinkPad X390 Yoga 02DL021 Replacement Battery 11.52V - is backordered and will ship as soon as it is back in stock.
Voltage
11.52V
Amp
4100mAh
Lenovo ThinkPad X390 Yoga — 11.52V Li-Polymer Replacement Battery (02DL021)
This is an 11.52V, 4100mAh (47.23Wh) Li-Polymer battery for the Lenovo ThinkPad X390 Yoga 2-in-1 convertible notebook. It replaces OEM part numbers including 02DL021, L18L3P72, L18M3P72, SB10K97659, and related variants. It fits X390 Yoga units across the 05CD, 08CD, and 20NNA007CD build codes.
- X390 Yoga platform compatibility: All ThinkPad X390 Yoga variants share the same 11.52V three-cell Li-Polymer architecture, connector pinout, and BMS handshake protocol. The OEM part numbers L18L3P72, L18M3P72, and L18S3P72 are functionally interchangeable across this platform — they reflect firmware revisions, not different cells.
- Bench tested on actual hardware: We ran this cell on a ThinkPad X390 Yoga under mixed CPU and display load. The BMS communicated correctly over SMBus, charge current stepped down properly at the 80% threshold, and cell voltage held within spec under sustained load without triggering a protective cutoff.
- First-cycle reset after install: After fitting this battery, discharge the laptop to hibernate cutoff — not just sleep — then charge uninterrupted to 100%. This forces the BIOS battery learn cycle to recalibrate against the new cell and clears the inaccurate health warning that appears after every cell swap on ThinkPad firmware.
BIOS reporting battery health as poor immediately after replacement
The ThinkPad BIOS reads health data from EEPROM embedded in the battery pack. A new cell carries fresh EEPROM data that doesn't match the charge history stored from the old pack, so the firmware flags it as degraded on the first boot. This is a firmware calibration issue, not a cell defect. Run one full discharge-to-hibernate cycle followed by an uninterrupted charge to 100% — the BIOS battery learn cycle will rewrite its baseline and the poor health warning will clear.
Laptop shutting down at 20–30% charge shown on screen
This happens when the fuel gauge IC hasn't yet calibrated against the new cell's actual voltage curve. The percentage displayed is calculated from old charge-cycle data, so the reported figure doesn't match the real remaining cell voltage. Under full CPU plus display load, voltage drops sharply — the cell hits the BMS cutoff floor while the OS still shows 20–30% remaining. Complete two to three full discharge-to-hibernate and charge-to-100% cycles. After that, the fuel gauge IC recalibrates and the shutdown threshold aligns with the actual cell floor, which on this pack sits at approximately 9.0V.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Lenovo
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
Why does my ThinkPad X390 Yoga show the wrong Wh rating in Lenovo Vantage after fitting this battery?
The Wh figure displayed in Lenovo Vantage and in Windows battery settings is read from the cell's EEPROM, not measured in real time. A replacement cell's EEPROM may report the rated chemistry capacity rather than the exact value the old pack was calibrated to, causing a mismatch in the system info panel. This is an EEPROM data difference between OEM revisions — not a sign of a faulty or undersized cell. The actual capacity is 47.23Wh as rated; cross-check by running the BIOS battery gauge reset under Lenovo Vantage settings.
The charge stops at 80% and won't go higher — is the battery faulty?
No. The ThinkPad X390 Yoga BIOS includes a Conservation Mode charge limit that caps charging at 80% to reduce cell stress over time. This is a firmware setting, not a battery fault. Open Lenovo Vantage, go to Power → Battery, and check whether Conservation Mode or the custom charge threshold is enabled. Disabling it allows the cell to charge to 100%.
Windows fuel gauge reads 100% but drops to under 50% within minutes of unplugging — what's causing it?
The fuel gauge IC stores charge-cycle history tuned to the old cell's degradation curve. When a new cell is fitted, that stored data is immediately out of sync, so the percentage calculation is inaccurate from the first cycle. The IC hasn't yet mapped the new cell's voltage-to-capacity profile. Run two full discharge-to-hibernate cycles followed by uninterrupted charges to 100% — after that, the IC recalibrates and the gauge will track the actual cell state accurately.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





