Medion MD81877 Cordless Phone Replacement Battery 2.4V 600mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Medion MD81877 Cordless Phone Replacement Battery 2.4V 600mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Medion MD81877 Cordless Phone Replacement Battery 2.4V 600mAh - is backordered and will ship as soon as it is back in stock.
Voltage
2.4V
Amp
600mAh
Medion MD81877 / Slim DECT 500 Series — 2.4V Ni-MH Replacement Battery (5M702BMX)
This 2.4V, 600mAh Ni-MH battery replaces the original pack in Medion cordless DECT handsets including the MD81877, MD82877, Life S63006, and Slim DECT 500 series. It matches the OEM voltage and cell format so the handset seats correctly in the base station charging cradle. Capacity is 600mAh — use the product data figure, not the cell markings on older OEM packs.
- MD81877 / MD82877 / Slim DECT 500 fit: These handsets share the same 2.4V two-cell NiMH architecture, connector pinout, and cradle contact spacing. One battery format covers all of them — voltage rail and physical dimensions are identical across the range.
- Bench tested on actual hardware: We cycled this pack through charge and discharge on a DECT handset cradle and confirmed the BMS accepted charge without triggering a fault light. Voltage at full charge measured within the base station's acceptance window.
- First charge on DECT NiMH packs: Place the handset in the base immediately after installing the new battery. Leave it on charge for a full 16 hours before first use. NiMH cells in cordless phones need this slow initial charge to reach rated capacity — a short charge first time results in reduced talk time across every subsequent cycle.
Base station charge light not activating on a new NiMH pack
NiMH batteries lose voltage during storage. If a new pack arrives with cell voltage below roughly 2.0V, some Medion base stations will not initiate a charge cycle — the charging circuit expects a minimum voltage before it engages. Remove the handset, wait 30 seconds, then reseat it firmly so both cradle contacts are fully engaged. If the charge light still does not activate, connect the base station to a different mains socket to rule out a low-voltage supply issue, then reseat again.
Talk time noticeably shorter than the original battery for the first few uses
This is normal behaviour for NiMH cells and not a fault. Fresh NiMH batteries do not reach rated capacity on the first charge cycle — it typically takes three to five full charge-and-discharge cycles before the cells stabilise at 600mAh. Each cycle slightly increases delivered capacity until the pack settles. Run the handset until it signals low battery, return it to the base for a full charge, and repeat — by cycle four or five, talk time will reflect the rated figure.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Medion
- Manufacturer: CS
- Series: Standard
- Color: Green
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Medion MD81877 handset is losing range — calls break up near the edge of the house since I put the new battery in. Did I get a dud battery?
Range drop after a battery swap is usually a voltage sag issue, not a dead battery. Under RF transmit load, a NiMH pack that hasn't completed its conditioning cycles can't hold voltage steady — the handset's transmit power dips and range collapses. Run three to five full charge-discharge cycles first; the cells need that to stabilise internal resistance. After cycle five, check whether the pack holds above 2.2V during normal use — if it drops below that under call load, the cells are faulty.
The handset went completely flat overnight sitting on the desk — it wasn't in the base. Is the battery draining itself?
A Medion DECT handset left off the base draws continuous standby current from the battery — it's actively powered, not asleep. A 600mAh NiMH pack at this voltage cannot sustain that draw for more than a standard evening. Always return the handset to the cradle when not in use. If the battery drains fully even when seated correctly in the base, check that both metal contacts on the cradle and the handset are clean and making firm contact — a dirty contact causes the base to stop charging while the handset keeps drawing current.
My Medion handset lost its pairing with the base station after I swapped the battery. How do I get it back?
Removing the battery cuts all power to the handset, and some DECT phones clear their pairing registration when power is fully lost. This isn't a battery fault — it's the handset firmware losing its stored base ID. To re-pair, press and hold the registration button on the base station until the indicator flashes, then use the handset menu to search for and register a new base. The exact menu path is in the MD81877 manual under "Register Handset" — the process takes under two minutes.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




