Motorola Clarigo SMP-508 7.4V Replacement Battery 60Q137301-C
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Motorola Clarigo SMP-508 7.4V Replacement Battery 60Q137301-C - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Motorola Clarigo SMP-508 7.4V Replacement Battery 60Q137301-C - is backordered and will ship as soon as it is back in stock.
Voltage
7.4V
Amp
1200mAh
Motorola Clarigo SMP-508 / SMP-528 — 7.4V Li-ion Replacement Battery (60Q137301-C)
This 7.4V 1200mAh Li-ion battery replaces the OEM 60Q137301-C pack in the Motorola Clarigo SMP-508 and SMP-528 two-way radios. It matches the original voltage rail and connector, so it seats and communicates with the radio's BMS without modification. Dimensions are 94.50 × 54.60 × 14.10mm — same footprint as the factory pack.
- SMP-508 and SMP-528 compatibility: Both models run the same 7.4V rail, share the same connector pinout, and use an identical BMS handshake sequence. One pack covers both units on your fleet.
- Bench tested on actual hardware: We cycled this pack through full charge and transmit-load discharge on the SMP-508 platform. The BMS held cutoff cleanly at low voltage and accepted charge without fault on a standard Motorola dock.
- First insertion into the dock: If the dock LED shows a fault on first insertion, remove the pack, wipe the gold contact strip with a dry cloth, and reseat it firmly. The SMP-series dock requires a clean contact cycle to initiate the BMS handshake before it begins charging.
Why the SMP-508 cuts out mid-transmission on a fresh 60Q137301-C pack
Pressing PTT drives a sharp current spike — the SMP-508 draws significantly more current during transmit than in standby. If the replacement pack ships at storage voltage (typically around 3.7–3.8V per cell), the BMS can interpret that spike as an overcurrent event and trip the protection circuit. This interrupts the transmission instantly, even though the battery is not defective. Fully charge the pack before first use — let the dock reach green — then the cells will be at full voltage and the BMS will handle the transmit spike without tripping.
Bar indicator showing one fewer bar than expected on a new pack
The SMP-508 and SMP-528 use a voltage-threshold bar indicator, not a fuel gauge chip. When a new pack arrives at storage voltage rather than full charge, the radio reads a lower voltage and displays fewer bars than the battery's true capacity warrants. This is not a fault with the cell — it is the radio responding accurately to the current resting voltage. Charge the pack fully on the dock until the LED goes green, then reinsert it and the bar display will reflect full charge.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Motorola
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My SMP-508 cuts out the moment I press the PTT button — is the new battery faulty?
Almost certainly not. PTT draws a sharp current spike, and if the pack arrived at storage voltage, the BMS can trip its overcurrent protection during that spike and cut the circuit. The radio goes silent, but the battery is intact. Charge the pack fully on the dock until the LED goes green before putting it into service — a full charge raises cell voltage high enough that the BMS handles the transmit spike without tripping.
The dock LED has been blinking red for an hour since I inserted the new 60Q137301-C — what clears it?
A blinking fault LED on the Motorola dock usually means the pack voltage is below the dock's acceptance threshold, or the contact strip is not making a clean connection. Remove the battery, wipe the gold contacts with a dry cloth, and reseat it firmly — the SMP-series dock needs a solid contact cycle to initiate the BMS handshake. If the fault persists, leave the pack seated for 10–15 minutes; some Motorola docks have a trickle pre-charge phase that runs silently before the LED switches to a normal charge indication.
The radio drops to noticeably weaker audio and shorter transmit range partway through a shift — battery or radio fault?
This is voltage sag under sustained RF output. As the cells discharge, voltage drops, and the SMP-508 reduces transmit power to protect the RF circuit — range and audio clarity both fall as a result. It is a normal protection behaviour, not a radio fault. The fix is to swap to a charged pack when the bar indicator drops to one bar, rather than running the battery down to cutoff, which puts more stress on the cells and accelerates capacity fade over time.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






