Motorola HMNN4151 CT150 Replacement Battery 7.2V 2100mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Motorola HMNN4151 CT150 Replacement Battery 7.2V 2100mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Motorola HMNN4151 CT150 Replacement Battery 7.2V 2100mAh - is backordered and will ship as soon as it is back in stock.
Voltage
7.2V
Amp
2100mAh
Motorola CT150 / CT250 / CT450 Series — 7.2V Ni-MH Replacement Battery (HMNN4151)
This is a 7.2V, 2100mAh nickel-metal hydride battery for the Motorola CT150, CT250, CT450, and CT450LS portable two-way radios. It replaces a wide range of OEM part numbers including HMNN4151, HMNN4151AR, PMNN4017, PMNN4018, and HNN9008 variants. Drop the old pack out, seat this one in, and the radio powers on without configuration changes.
- CT150 / CT250 / CT450 platform fit: These models share the same battery bay geometry, contact pin layout, and 7.2V NiMH voltage rail. The BMS handshake across all variants uses the same threshold, so one pack covers the full range without adapter or modification.
- Bench tested on actual hardware: We cycled this pack through charge and discharge on the CT series dock. The BMS held the 7.2V rail steady under simulated transmit load and did not trigger a protection cutoff at normal PTT current draw.
- First-charge protocol on the CT dock: NiMH cells ship at a partial storage charge. Run the first full charge cycle in the Motorola dock without interruption — pulling the pack early on the first cycle can cause the dock to misread cell capacity on subsequent charges and display a premature full-charge LED.
Why the CT450 cuts out mid-transmission on a new HMNN4151 pack
NiMH cells fresh from storage sit between 1.0V and 1.1V per cell — below the voltage the radio expects under transmit load. When you key PTT, the radio draws a sharp current spike to drive the RF stage. If cell voltage sags below roughly 6.0V under that load, the radio's undervoltage protection trips and kills the transmission. This is not a fault with the pack. One or two full charge-discharge cycles on the Motorola dock brings the cells up to working voltage and the sag disappears.
CT150 bar indicator showing one bar on a fully charged new pack
The CT series reads voltage thresholds at rest to set the bar display — it does not track capacity directly. A new NiMH pack at storage voltage reads lower than a conditioned pack at the same state of charge, so the radio displays fewer bars even after the dock shows a full-charge LED. Complete one full discharge-charge cycle through the dock. Resting voltage after that cycle should sit above 7.5V, and the bar indicator will reflect that correctly.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Motorola
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My CT450 cuts out every time I hold PTT for more than a few seconds — is the new battery causing this?
Yes, and it is a voltage issue, not a defective pack. NiMH cells at storage charge sag hard under the transmit current spike, dropping below the radio's undervoltage cutoff and killing the transmission. Fully charge the pack in the Motorola dock without interruption, then run it through one complete discharge cycle. After conditioning, resting voltage should hold above 7.5V and the mid-transmission dropout stops.
The charger dock blinks a fault LED every time I insert the new HMNN4151 — what does that mean?
The dock is rejecting the pack because the cell voltage is below the dock's acceptance threshold — this happens when NiMH cells arrive at deep storage charge. Remove the battery, wipe the gold contact strip with a dry cloth, and reseat it firmly. A clean contact cycle lets the dock register the BMS handshake correctly. If the fault LED persists after reseating, leave the pack in the dock for 15 minutes — some Motorola docks run a pre-charge trickle below acceptance voltage before switching to full charge mode.
The CT250 drops to noticeably weaker audio and signal on a long shift — is this a bad cell?
This is voltage sag under sustained RF output, not a failed cell. As the pack discharges through a heavy-use shift, cell voltage drops toward the lower end of the NiMH range and the radio reduces TX power to protect the circuit. It is expected behaviour on NiMH chemistry under continuous load. To delay the onset, avoid leaving the radio keyed on an open channel for extended periods — sustained RF output drains the pack faster than normal PTT use. Recharge when the bar indicator drops to one bar.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





