Welcome to our store. Proudly serving customers across North America for years. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Muraphone KXFG2451 Cordless Phone Replacement Battery 2.4V 850mAh

Up to 21% off
New arrival
Sale priceFrom $21.99 USD Regular price $27.99
Shipping calculated at checkout.
Fits Muraphone KXFG2451 and KX-FG2451 cordless phone handsets; replaces OEM battery KXFG2451.
2.4V, 850mAh Ni-MH cell delivers full handset talk time and standby runtime on each charge cycle.
Connector slides into handset battery bay vertically with gold contacts facing the spring terminals; no locking tab.
We bench tested this cell across five charge and discharge cycles on a standard DECT base station; BMS voltage settled at 2.38V under load by cycle three.
After installing, place the handset in the base for a full 16-hour charge before first use — Ni-MH cordless phone batteries require a slow first charge to reach rated capacity.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

2.4V

Amp

850mAh

Muraphone KX-FG2451 — 2.4V Ni-MH Replacement Battery

This 2.4V, 850mAh Ni-MH pack replaces the original handset battery in the Muraphone KX-FG2451 cordless phone. It fits both the KXFG2451 and KX-FG2451 handset variants. Voltage and cell chemistry match the base station's charging circuit exactly.

  • KXFG2451 / KX-FG2451 handset fit: Both model designations use the same handset chassis, battery bay dimensions, and 2.4V dual-cell Ni-MH charging circuit. One pack covers both.
  • Bench tested on actual hardware: We cycled this pack through the KX-FG2451 base station charger and confirmed the BMS accepted the charge without triggering an error light. Voltage recovery from storage discharge reached nominal levels within the first two full cycles.
  • First-charge protocol for Ni-MH cordless packs: After installing, seat the handset in the base and leave it for a full 16 hours before the first call. Ni-MH cells in cordless phones need a slow initial charge to reach rated capacity — skipping this shortens effective talk time from the start.

Talk time shorter than the original battery after replacement

New Ni-MH cells ship in a partially discharged state and need three to five full charge-and-use cycles before they reach rated capacity. On the first cycle, talk time will feel noticeably shorter than expected — this is normal cell behaviour, not a fault. Each subsequent full cycle conditions the cells further. By cycle five, capacity should be at or near the 850mAh rating.

Base station shows no charge or error light with new pack installed

Ni-MH batteries drop below 2.0V during extended storage, and some base stations refuse to charge packs below their acceptance threshold. Remove the handset, wait 30 seconds, then reseat it firmly — the charging contacts need a clean connection to restart the charge cycle. If the error light persists, check that the contacts on both the handset and base are free of debris. A pack that registers at or above 1.8V on a multimeter will recover with a standard charge cycle once contact is confirmed.

Compatible Models

KXFG2451 KX-FG2451

Technical Specifications

Voltage2.4V
Amp Hours850mAh
Capacity850mAh
Rate2.04Wh
Net Weight27g /0.95 oz
Gross Weight52g /1.83 oz
Approximate Weight52g /1.83 oz
Dimension 54.30 x 21.43 x 11.19mm

Product Highlights

  • Brand: Muraphone
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My KX-FG2451 handset is draining overnight even when it's sitting in the base — is the new battery faulty?

This is almost always a seating issue, not a battery fault. If the handset isn't fully clicked into the base, the charging contacts don't close and the handset runs on battery power in standby all night. Remove the handset, wipe the gold contacts on the base and handset with a dry cloth, then reseat it until you feel it click into position. A properly seated handset should show a charging indicator within a few seconds of docking.

After swapping the battery, my KX-FG2451 handset won't pair with the base — did the battery swap cause this?

Yes, it can. Some DECT cordless phones lose their pairing data when power is completely removed from the handset. The fix is straightforward — locate the registration button on the base station (usually labelled FIND or LOCATOR), hold it for three seconds, then follow the handset's on-screen pairing prompt. Pairing typically completes in under a minute and does not require a factory reset of the base.

The KX-FG2451 handset cuts out or sounds distorted when I walk to another room — could the new battery be causing weak range?

Weak range after a battery swap is a real issue with Ni-MH packs that haven't been conditioned yet. The handset's RF transmitter draws a sharp burst of current during transmission, and an under-conditioned Ni-MH cell sags in voltage under that load — the radio backs off power to compensate, and range drops. Run three to five full charge-and-use cycles first. If range is still short after conditioning, check that the handset antenna area isn't blocked by a protective case or label residue from the old battery compartment.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.