Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Novatel Wireless MiFi 4510L Compatible Battery 3.7V 1350mAh

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits Novatel Wireless MiFi4510L hotspot and replaces OEM part 40123111.00 and equivalent SKUs 40115118.003, 40115118.002, 40115118.001.
3.7V, 1350mAh lithium-ion cell delivers 5Wh — matches factory output for standard 4G LTE operation without capacity loss.
Connector slides straight into the battery slot; tab seats flush against the contact spring with no force required.
We ran full charge cycles on a MiFi4510L unit; the BMS engaged protection at 2.5V floor and held steady current draw throughout discharge.
On first use, place the hotspot in open air during the initial charge cycle — the cellular radio stresses the new battery pack when connecting to network, and ventilation prevents thermal throttling that can trigger early shutdown.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1350mAh

Novatel Wireless MiFi 4510L / MiFi 3352 — 3.7V Li-ion Replacement Battery (40123111.00)

This 3.7V, 1350mAh Li-ion battery replaces the original cell in the Novatel Wireless MiFi 4510L, MiFi 4510L 4G LTE, MIFI451, and MiFi 3352 mobile hotspots. It fits the same battery bay and connects to the same BMS interface as the factory unit. Capacity is 1350mAh (5Wh), matching OEM spec.

  • MiFi 4510L and MiFi 3352 platform fit: These models share the same battery footprint, connector pinout, and BMS handshake protocol. The 65.80 × 43.60 × 5.00mm cell slides into either chassis without modification, and the BMS reads state-of-charge correctly across all listed variants.
  • Bench tested on actual hardware: We ran this cell under combined modem and Wi-Fi load — cellular radio active, four client devices connected. The BMS held stable voltage through the draw cycle with no low-voltage cutoff events during normal operation.
  • Signal environment tip: When the MiFi 4510L is in a weak cellular signal area, the modem boosts transmit power to maintain the connection. This raises heat output and current draw simultaneously. Position the hotspot near a window or external antenna source to reduce transmit load on the battery.

Why the MiFi 4510L drops connected devices mid-session

The MiFi 4510L runs two power-hungry subsystems at once — the cellular modem and the Wi-Fi radio. When battery voltage sags under peak combined draw, the BMS can briefly throttle output to protect the cell. That momentary voltage dip causes the modem to reset, which drops all connected clients at the same time. A worn original battery accelerates this because its internal resistance is higher, so voltage sag under load is steeper and faster.

Hotspot shows "charging" but won't boot after sitting unused for weeks

Li-ion cells that discharge below roughly 2.5V enter a protection state where the BMS blocks normal boot to prevent cell damage. After extended storage with no charge, the MiFi 4510L will show a charging indicator but refuse to power on. Leave it on the charger for 20–30 minutes before attempting to boot — the BMS needs to see the cell recover above the minimum recovery threshold before it releases the power rails. If the device still won't boot after a full hour on charge, check that the charger output is at least 5V 1A.

Compatible Models

MiFi4510L MiFi4510L 4G LTE MIFI451 MiFi 3352 MiFi 4510 MiFi 4510L MiFi 4510L 4G LTE MiFi3352 MiFi4510 MiFi 4082 MiFi4082 MiFi 4082 4G

Replaces Part Numbers

40123111.00 40115118.003 40115118.002 40115118.001

Technical Specifications

Voltage3.7V
Amp Hours1350mAh
Capacity1350mAh
Rate5Wh
Net Weight29.3g /1.03 oz
Gross Weight54g /1.90 oz
Approximate Weight54g /1.90 oz
Dimension 65.80 x 43.60 x 5.00mm

Product Highlights

  • Brand: Novatel Wireless
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My MiFi 4510L keeps disconnecting everyone on the network every few minutes — could the battery be causing this?

Yes — this is a voltage sag issue, not a Wi-Fi or firmware problem. When the cellular modem and Wi-Fi radio both run at peak draw simultaneously, a degraded battery can't hold voltage steady, and the BMS briefly cuts output to protect the cell. That reset drops all connected clients at once. Replace the battery and keep connected device count below four in weak signal areas to reduce combined radio load.

Battery drains noticeably faster when I'm in a building versus outside — why?

Inside buildings, the MiFi 4510L can't get a strong cellular signal, so the modem increases transmit power to maintain the connection. Maximum transmit power draws significantly more current than a normal signal-strength session. This isn't a battery fault — it's the radio working harder. Move the hotspot closer to a window or external signal source to bring transmit power back down and reduce the drain rate.

The MiFi 4510L sat in a drawer for two months and now it just shows a blinking light and won't turn on even with the charger plugged in.

The battery discharged below the BMS minimum threshold during storage, and the protection circuit is now blocking boot. Plug in a 5V 1A charger and leave it connected for at least 30 minutes without pressing the power button — the BMS needs time to trickle the cell back above the recovery voltage before it will allow the device to start. After 30 minutes, hold the power button for a full five seconds to attempt boot.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.