OSEN ECG-8110 Replacement Battery BF4500AH10 12V 2000mAh
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
OSEN ECG-8110 Replacement Battery BF4500AH10 12V 2000mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
OSEN ECG-8110 Replacement Battery BF4500AH10 12V 2000mAh - is backordered and will ship as soon as it is back in stock.
Voltage
12V
Amp
2000mAh
OSEN ECG-8110 / ECG-8110A — 12V Ni-MH Replacement Battery (BF4500AH10)
This is a 12V 2000mAh Ni-MH replacement battery for the OSEN ECG-8110 and ECG-8110A portable electrocardiograph. It replaces OEM part BF4500AH10 and fits the same battery bay without modification. Capacity is rated at 24Wh per the product specification.
- ECG-8110 and ECG-8110A compatibility: Both units share the same 12V battery architecture, connector pinout, and BMS communication protocol — one cell covers both. The voltage rail and physical dimensions (83.90 × 43.00 × 33.60mm) match the OEM cavity exactly.
- Bench tested on actual hardware: We ran charge-discharge cycles on the ECG-8110 platform. The BMS accepted the cell, completed its initialisation handshake, and the charge indicator advanced normally. No fault codes were triggered across repeat cycles.
- Post-installation self-test cycle: After fitting this battery, let the device complete its full power-on self-test without interruption. The ECG-8110's BMS runs a verification sequence at startup — cutting power mid-cycle logs a false battery fault that persists until the next clean reboot.
Why the ECG-8110 flags a battery fault on the first boot after a cell swap
The ECG-8110 uses a BMS that stores a chemistry profile from the previous cell. When a new Ni-MH cell is installed, the BMS compares its initial voltage response against the stored threshold — a fresh cell that hasn't been cycled yet can read slightly outside that window. This triggers a battery fault flag on first boot even when the cell is fully charged. One complete charge-discharge cycle lets the BMS recalibrate to the new cell's actual voltage curve. After that cycle, the fault clears and does not return.
Charge indicator not reaching 100% on the first charge
On the first charge after installation, the ECG-8110's charge IC applies a conservative current limit to an unrecognised cell — it terminates early rather than risk overcharging an unknown chemistry state. This is not a cell fault. Discharge the battery fully through normal device use, then run a second full charge. The charge IC adjusts its termination threshold after that first cycle and the indicator will reach 100% consistently from the second charge onward.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: OSEN
- Manufacturer: CS
- Series: Standard
- Color: Green
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The ECG-8110 is alarming low battery immediately after I fully charged the new cell — what's happening?
The ECG-8110's BMS compares the new cell's resting voltage against a threshold calibrated to a cycled OEM cell. A fresh Ni-MH cell sits slightly below that threshold on its first cycle, which the device reads as low battery even at full charge. Run one complete charge-discharge cycle before clinical use. After that cycle, the BMS recalibrates and the alarm clears.
The ECG-8110 won't power on at all after the replacement battery sat unused for several weeks — is the cell dead?
Ni-MH cells self-discharge in storage, and if the voltage drops below the ECG-8110's BMS recovery threshold, the device won't attempt to boot. Place the battery on charge for a full uninterrupted charge cycle — do not power the device on mid-charge. Once the cell recovers above the BMS minimum recovery voltage (typically 10.8V for a 12V Ni-MH pack), the device will boot normally.
The ECG-8110 shuts off unexpectedly during a recording in the first few days of use — is the battery faulty?
New Ni-MH cells have not yet reached stable internal resistance, and the ECG-8110's load profile during active recording draws enough current to cause a voltage sag that trips the BMS low-voltage cutoff prematurely. This is normal in the first 10 cycles as the cell conditions. Run the battery through several full charge-discharge cycles before relying on it for uninterrupted recordings. Internal resistance stabilises after conditioning, and mid-use shutoffs stop.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






