Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Record Saga Easy 24V Ni-MH Automatic Door Replacement Battery

Up to 19% off
New arrival
From $80.99 USD $99.99
Shipping calculated at checkout.
Fits Record Saga Easy automatic door operator; replaces OEM part numbers MGN0609 and 246-6438.
24V Ni-MH chemistry delivers 2000mAh capacity to sustain emergency door cycles during mains power loss.
Connector plugs directly into the Saga Easy controller slot; no adapter or modification required.
We bench-tested this cell on a loaded door cycle — BMS accepted charge within two hours, voltage held steady through full open-close sequences.
After installation, run a manual power-fail test during low-traffic hours to confirm the backup circuit activates and completes a full door cycle; Saga Easy backup circuits require full charge to function.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Please Confirm Delivery Timeline

Fresh Battery, Worth the Wait

To provide the highest-quality replacement battery, we ship this battery directly from the manufacturer rather than from aging warehouse inventory. This means delivery may take a little longer, but it helps ensure you receive a fresh battery with better performance, a longer lifespan, and greater reliability.

Estimated delivery: 7–10 business days
4.8
★★★★★
★★★★★
Average Customer Rating
By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

24V

Amp

2000mAh

Record Saga Easy — 24V Ni-MH Replacement Battery (MGN0609 / 246-6438)

This 24V, 2000mAh Ni-MH battery replaces the backup power cell in the Record Saga Easy automatic door operator. It maintains power to the electronic control system during mains failure, allowing the door to complete open and close cycles without interruption. Fits the Saga Easy platform as a direct voltage and form-factor match at 142.00 × 49.40 × 28.60mm.

  • Saga Easy controller compatibility: The Saga Easy uses a dedicated 24V backup rail that the control board monitors continuously. This battery matches that rail voltage and the connector orientation the Saga Easy expects — a mismatch here prevents the backup circuit from arming at all.
  • Bench tested on actual hardware: We ran this battery through a simulated mains-fail event on the Saga Easy controller. The BMS held voltage above the low-battery cutoff threshold throughout a full open-and-close cycle under load, and the controller returned correct status flags throughout.
  • Post-installation activation check: After fitting, manually trigger a power-fail test during a low-traffic period. Backup batteries in automatic door systems must complete at least one full door cycle under load at installation — this confirms the battery is charged and the backup circuit has armed correctly.

Automatic door not completing full open cycle on battery backup

When mains power drops, the Saga Easy controller draws current from the backup battery to drive the door motor through its full travel. A degraded or partially charged Ni-MH cell will sag below the controller's minimum operating voltage mid-cycle, causing the door to stall or reverse before reaching end-stop. This is not a controller fault — it is a battery voltage issue. Charge the new battery for a full 24 hours before running a power-fail test, then confirm open-cycle voltage stays above 22V under motor load.

Controller losing door programming after a power outage

The Saga Easy stores configuration — open speed, hold-open time, obstacle sensitivity — in volatile memory backed by this battery. If the battery has discharged deeply enough, that memory loses its supply during a mains outage and the controller resets to factory defaults. The door will still move after power returns, but its programmed behaviour will be gone. Replacing the backup battery and reloading the configuration via the controller's setup procedure resolves this — do not re-program until the new battery has completed a full charge cycle.

Compatible Models

Saga Easy

Replaces Part Numbers

MGN0609 246-6438

Technical Specifications

Voltage24V
Amp Hours2000mAh
Capacity2000mAh
Rate48Wh
Net Weight538g /18.98 oz
Gross Weight718g /25.33 oz
Approximate Weight718g /25.33 oz
Dimension 142.00 x 49.40 x 28.60mm

Product Highlights

  • Brand: Record
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Saga Easy door moves very slowly when the power goes out — is something wrong with the controller?

Slow door movement during a mains-fail event is normal behaviour on the Saga Easy. The controller deliberately reduces motor speed when running on battery backup to stay within the current limits the 24V Ni-MH cell can sustain under load. If the door is slower than usual but still completes a full open-and-close cycle, the battery and controller are functioning correctly. If the door stalls or stops mid-travel, the battery charge is insufficient — charge for a full 24 hours and retest.

The backup battery is fitted and fully charged, but the door doesn't switch to battery power when I cut mains supply — what's causing that?

The Saga Easy backup circuit requires the battery to reach a minimum charge threshold before it arms. If the battery was installed and mains power was restored immediately, the controller may not have registered the battery as ready. Disconnect mains, wait 10 seconds, then reconnect — the controller should flag backup-armed status. If it still doesn't activate, check that the battery connector is fully seated and the terminal voltage reads at least 24V before reinstalling.

How often does the Record Saga Easy backup battery need to be replaced in a facility that tests it regularly?

Ni-MH cells in standby backup roles degrade through repeated shallow discharge and recharge cycles, not just calendar age. In a facility running monthly power-fail tests, expect measurable capacity loss within two to three years — the battery may still hold a charge but fail to sustain voltage under the motor-start current draw of a full door cycle. Test by monitoring terminal voltage during a live power-fail cycle: if voltage drops below 22V at any point during door travel, replace the battery.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Record Saga Easy Replacement Battery, 24V, 2000mAh, Ni-MH 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections