Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Tolino Shine 2 HD Replacement Battery 3.7V 1500mAh

Up to 21% off
New arrival
Sale priceFrom $24.99 USD Regular price $30.99
Shipping calculated at checkout.
Fits Tolino Shine 2 HD and Shine 3 e-readers; replaces original 3.7V battery pack.
3.7V, 1500mAh lithium-polymer cell delivers 5.55Wh; sustains full e-ink refresh cycles and processor draw.
Connector seats flush into the battery slot with no locking tab; orientation marked on housing.
We bench-tested this cell in a Shine 2 HD; BMS calibrated on first charge without fault codes.
After install, charge via USB-C for one complete cycle before opening books — firmware recalibrates battery percentage display after cell swap.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1500mAh

Tolino Shine 2 HD / Shine 3 — 3.7V Li-Polymer Replacement Battery

This 3.7V, 1500mAh Li-Polymer cell replaces the original battery in the Tolino Shine 2 HD and Shine 3 e-readers. Both models use the same cell format — 84.15 × 49.50 × 2.70mm — with the same connector and BMS handshake requirements. Capacity is 1500mAh (5.55Wh), matching the factory specification.

  • Shine 2 HD and Shine 3 compatibility: Both devices share the same cell dimensions, voltage rail, and connector pinout. The battery management system on each model expects the same charge termination voltage, so one cell covers both without any modification.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on a Shine 2 HD unit. The BMS accepted the cell without fault codes, charge termination triggered correctly at 4.2V, and the firmware reported capacity without error after a full cycle.
  • Post-swap charge cycle on e-readers: After fitting this cell, run a full USB charge to completion before first use. The Tolino firmware reads the new cell's state-of-charge from scratch — skipping this step causes the battery percentage display to jump or read incorrectly until the calibration cycle completes.

Why the Tolino Shine 2 HD shows low battery immediately after a new cell is fitted

Replacement cells ship at storage voltage — typically 3.6V to 3.85V — not at full charge. The Tolino firmware checks state-of-charge on boot and reports what it finds. If the cell voltage is below the display's calibration threshold, the device shows a low battery warning even though the cell is not defective. Connect to a USB charger straight after fitting the new cell and leave it until the charge indicator clears. Do not dismiss the warning and expect normal use — the firmware needs to complete one full charge sweep to anchor its percentage readings to the new cell.

Page turns slow or unresponsive after battery replacement

E-ink displays draw a short high-current pulse to refresh each page. Under low cell voltage, that pulse takes longer to execute, which shows up as a delayed or sluggish page turn. This is not a fault with the replacement cell — it is the display controller throttling refresh speed to stay within the available voltage. Charge the device fully first; page turn speed returns to normal once cell voltage is above 3.9V. If sluggishness persists after a full charge, reseat the battery connector and confirm the cell contacts are fully engaged.

Compatible Models

Shine 2 HD Shine 3

Technical Specifications

Voltage3.7V
Amp Hours1500mAh
Capacity1500mAh
Rate5.55Wh
Net Weight25g /0.88 oz
Gross Weight75g /2.65 oz
Approximate Weight75g /2.65 oz
Dimension 84.15 x 49.50 x 2.70mm

Product Highlights

  • Brand: Tolino
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Tolino Shine 2 HD won't turn on at all after fitting the replacement battery — is the cell dead?

Unlikely. Replacement Li-Polymer cells ship at storage voltage, which can be too low to trigger the Shine 2 HD's boot sequence. Connect the device to a USB charger immediately and leave it for at least 10 minutes without pressing the power button. Once the cell climbs above approximately 3.5V, the device will boot. If it still shows nothing after 20 minutes on charge, reseat the battery connector — a partially seated connector is the most common cause of a complete no-boot after a swap.

The battery percentage on my Tolino Shine 3 jumps around — it shows 80%, then drops to 20% without much use. Is the new cell faulty?

This is firmware recalibration, not a faulty cell. After a cell swap, the Tolino firmware has no learned capacity data for the new battery and estimates state-of-charge loosely until it completes a full charge-and-discharge cycle. Run the device down to the low-battery warning, then charge it fully in one uninterrupted session. The percentage readings stabilise after one or two complete cycles as the firmware maps the new cell's actual capacity curve.

WiFi sync is draining the new battery far faster than normal reading — is something wrong with the replacement cell?

Nothing is wrong. WiFi draw on the Shine 2 HD and Shine 3 runs significantly higher than e-ink display refresh alone — the radio pulls sustained current that the display never does. A reading-only session and a session with active WiFi sync are not comparable loads. Disable WiFi auto-sync and connect manually when needed. If drain still seems excessive with WiFi off, check that the device is not stuck in a background sync loop — go to settings and confirm sync is set to manual.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.