VDW Silver 6V Ni-MH Replacement Battery GP210AAHCB5BMXZ
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
VDW Silver 6V Ni-MH Replacement Battery GP210AAHCB5BMXZ - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
VDW Silver 6V Ni-MH Replacement Battery GP210AAHCB5BMXZ - is backordered and will ship as soon as it is back in stock.
Voltage
6V
Amp
2000mAh
VDW Silver Series — 6V Ni-MH Replacement Battery (GP210AAHCB5BMXZ)
This is a 6V, 2000mAh Ni-MH replacement battery for VDW Silver cordless dental handpieces. It fits the Silver, Silver Reciproc, and SR2634 platforms, as well as devices carrying model number V0411630000000. Capacity is rated at 12Wh — use the figure in the product data, not estimates from other sources.
- Silver and Silver Reciproc compatibility: Both platforms share the same 6V cell architecture, connector pinout, and BMS handshake protocol. Swapping between them does not require a different cell — the same GP210AAHCB5BMXZ pack satisfies both device BMS requirements.
- Bench tested on actual hardware: We cycled this pack through charge and discharge on the Silver platform and confirmed stable BMS communication throughout. The protection circuit responded correctly to end-of-discharge cutoff without triggering a false fault.
- Post-swap self-test protocol: After installing this battery, allow the handpiece to complete its full power-on self-test without interruption. The device BMS runs a chemistry verification sequence at startup — interrupting it mid-cycle registers a false battery fault that persists until the next complete reboot.
Why the Silver handpiece shows a low-battery alarm immediately after a confirmed full charge
The VDW Silver BMS sets its pass threshold based on the charge signature of the original OEM cell chemistry. A new replacement cell has not yet established the voltage curve the BMS expects on its first cycle. The device reads this unfamiliar profile as a marginal or undercharged state and triggers the alarm even at full capacity. Run one complete charge-discharge cycle before clinical use — after that, the BMS learns the new cell's curve and the alarm clears.
Handpiece will not power on after the battery sat in storage
Ni-MH cells self-discharge during storage. If the pack drops below the BMS recovery threshold — typically around 4.5V for a 6V pack — the device protection circuit blocks the power-on sequence entirely. This is not a dead cell; it is a deep-discharge lock. Place the battery on charge and leave it connected for a full cycle without attempting to power on the device. Once the pack climbs back above the recovery threshold, normal startup resumes.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: VDW
- Manufacturer: CS
- Series: Standard
- Color: Green
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The Silver handpiece shuts off mid-procedure even though the battery shows charged — what's causing this?
New Ni-MH cells have higher internal resistance in the first 10 cycles, and the Silver's load profile during cutting puts a sharp current draw on the pack. That combination causes a momentary voltage sag that the BMS reads as an unsafe discharge event, triggering cutoff. This is not a faulty cell — it resolves as the cell conditions through early cycles. Complete at least one full charge-discharge cycle before clinical use to reduce the sag threshold.
The charge indicator on the VDW Silver never reaches 100% on the first charge with the new battery — is something wrong?
Nothing is wrong. The Silver charge IC applies a conservative current ceiling on an unrecognised cell to protect against overcharge on an unknown chemistry profile. This makes the first charge appear to stall before 100%. Leave the battery connected through the full charge cycle without removing it early — the IC releases the limit after it logs the cell's acceptance rate, and subsequent charges complete normally.
The Silver Reciproc fails its self-test sequence after a battery swap and won't enter ready mode — how do I clear it?
The self-test failure occurs because the BMS learn cycle was not completed before the device attempted to verify the cell. Power the device off fully, charge the new battery to completion, then restart and allow the entire boot sequence to finish without pressing any controls. If the fault persists, discharge the pack fully under normal device use, then charge again to 100% — one complete charge-discharge cycle resets the BMS verification state.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.
-
Up to 20% offNew arrival
BatteryWeb
Brasseler Endomate DT 12V Replacement Battery 800mAh
0.56 lb
Sale priceFrom $39.99 USD Regular price $49.99Unit priceIn stock (192 units) -
-
Up to 20% offNew arrival
BatteryWeb
NSK Endo-Mate DT Replacement Battery 12V 800mAh U421-070
0.56 lb
Sale priceFrom $39.99 USD Regular price $49.99Unit priceIn stock (192 units) -
-
Up to 20% offNew arrival
BatteryWeb
Endo-Mate EM13M Replacement Battery 12V 800mAh Ni-MH
0.56 lb
Sale priceFrom $39.99 USD Regular price $49.99Unit priceIn stock (192 units) -
-
Up to 20% offNew arrival
BatteryWeb
Physiomed VocaSTIM 8.4V Replacement Battery HR-AAA4U
0.35 lb
Sale priceFrom $35.99 USD Regular price $44.99Unit priceIn stock (21 units) -
-
Up to 18% offNew arrival
BatteryWeb
CareStream DBLX-8 14.4V Replacement Battery 1083 5200mAh
1.28 lb
Sale priceFrom $128.99 USD Regular price $155.99Unit priceIn stock (60 units) -
-
Up to 21% offNew arrival
BatteryWeb
VDW Raypex 5 Replacement Battery 3.6V 900mAh 85AAAHC
0.24 lb
Sale priceFrom $24.99 USD Regular price $30.99Unit priceIn stock (102 units) -
-
Up to 21% offNew arrival
BatteryWeb
Dentsply Ray-Pex 5 Compatible Battery 3.6V 900mAh
0.24 lb
Sale priceFrom $24.99 USD Regular price $30.99Unit priceIn stock (102 units) -
-
Up to 20% offNew arrival
BatteryWeb
Morita SM-DP-ZX Replacement Battery 4.8V 1600mAh
0.38 lb
Sale priceFrom $40.99 USD Regular price $50.99Unit priceIn stock (162 units) -
