Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Verizon Ellipsis 10 HD Replacement Battery 3.85V 8000mAh

Up to 20% off
New arrival
Sale priceFrom $43.99 USD Regular price $54.99
Shipping calculated at checkout.
Fits Verizon Ellipsis 10 HD tablet, replaces OEM part number MLP2678135-2P.
3.85V 8000mAh lithium-polymer cell delivers the same energy capacity as the original pack.
Connector seats flush into the internal battery slot with mechanical locking tab engagement.
Bench testing showed the fuel gauge IC accepted the new cell after one full charge cycle.
After installation, discharge the tablet to automatic shutoff then charge uninterrupted to 100% — this recalibrates the fuel gauge against the new cell and fixes inaccurate percentage display.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.85V

Amp

8000mAh

Verizon Ellipsis 10 HD — 3.85V Li-Polymer Replacement Battery (MLP2678135-2P)

This 3.85V 8000mAh (30.8Wh) lithium-polymer battery replaces part number MLP2678135-2P in the Verizon Ellipsis 10 HD tablet. It fits the QTAXIA1 board revision and the 32GB HD 4G variant sold through Verizon. Same voltage, same connector, same physical footprint at 145.20 × 141.20 × 2.80mm.

  • Ellipsis 10 HD and QTAXIA1 compatibility: All three listed model variants — Ellipsis 10 HD, QTAXIA1, and Ellipsis 10 inch 32GB HD 4G — share the same battery bay geometry, flex connector pinout, and charge-IC handshake. One part number covers all three.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on a QTAXIA1 unit. The BMS accepted the charge-IC handshake without fault codes and held voltage within spec across display-on and Wi-Fi-active load states.
  • Fuel gauge recalibration after swap: After installing this battery, run the tablet down to automatic shutoff, then charge uninterrupted to 100% without interruption. This single full cycle resets the fuel gauge IC against the new cell's actual capacity curve and clears the inaccurate percentage readings that appear immediately after a swap.

Ellipsis 10 HD shutting down at 15–25% remaining

The Ellipsis 10 HD runs a 10-inch display alongside persistent Wi-Fi — both draw simultaneously during streaming. The combined current draw causes voltage to sag faster than the fuel gauge predicts, and the protection circuit cuts power before the reported percentage reaches zero. This is a fuel gauge calibration gap, not a defective cell. Run one full discharge-to-shutoff cycle followed by an uninterrupted charge to 100% and the shutoff threshold will stabilise at or below 5%.

Fast charging unavailable on the Ellipsis 10 HD after battery replacement

The Ellipsis 10 HD's charge IC negotiates charging rate during the first accepted charge cycle after a new cell is installed. Until that cycle completes, the device defaults to standard 5V charging as a safety fallback. This is normal behaviour — not a fault with the battery or the charger. Connect the original Verizon wall adapter, allow the first charge to reach 100% uninterrupted, and fast charging will be available from the next session onward.

Compatible Models

Ellipsis 10 HD QTAXIA1 Ellipsis 10 inch 32GB HD 4G

Replaces Part Numbers

MLP2678135-2P

Technical Specifications

Voltage3.85V
Amp Hours8000mAh
Capacity8000mAh
Rate30.8Wh
Net Weight129.2g /4.56 oz
Gross Weight269.2g /9.50 oz
Approximate Weight269.2g /9.50 oz
Dimension 145.20 x 141.20 x 2.80mm

Product Highlights

  • Brand: Verizon
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Ellipsis 10 HD is showing 60% battery but just shut off — did I get a bad cell?

The cell is not defective. The fuel gauge IC in the Ellipsis 10 HD was calibrated to your old degraded battery, so its voltage-to-percentage curve no longer matches the new cell. The protection circuit hits its low-voltage cutoff before the displayed percentage drops to zero. Run the tablet down to automatic shutoff, then charge uninterrupted to 100% — one full cycle resets the calibration and the early shutoffs stop.

The battery percentage on my Ellipsis 10 HD is jumping around and dropping faster than it should after I replaced it — what's happening?

The fuel gauge IC stores calibration data from the previous cell and applies it immediately to the new one, which causes erratic percentage readings and faster-than-expected drain from a full charge. The fix is the same recalibration step: discharge the tablet fully to automatic shutoff, then charge uninterrupted to 100% without unplugging partway through. After that single cycle, the gauge recalculates against the real capacity of the new 8000mAh cell and percentage tracking stabilises.

My Ellipsis 10 HD gets noticeably warm while charging the new battery — is the charge IC overheating?

Warmth during charging is expected when a new lithium-polymer cell first cycles through the charge IC. The IC runs a slightly higher current on the initial charge as it establishes communication with the new cell's BMS. If the tablet stays warm but not hot and cools down within a few minutes of reaching 100%, nothing is wrong. If it stays hot to the touch during a normal charge after the first cycle, check that the charging port and cable are clean and that the charger output matches 5V/2A.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.