PSC Quick Check 150 Barcode Scanner Replacement Battery 4.8V
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
PSC Quick Check 150 Barcode Scanner Replacement Battery 4.8V - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
PSC Quick Check 150 Barcode Scanner Replacement Battery 4.8V - is backordered and will ship as soon as it is back in stock.
Voltage
4.8V
Amp
200mAh
PSC Quick Check 150 / Quick Check 200 — 4.8V Ni-MH Replacement Battery (098)
This 4.8V, 200mAh Ni-MH cell replaces the original battery in the PSC Quick Check 150 and Quick Check 200 handheld barcode scanners. Both models use the same OEM part 098, making this a direct swap between the two. Voltage and cell chemistry match the original spec exactly.
- Quick Check 150 and 200 compatibility: Both scanners share the same battery bay dimensions, connector pinout, and 4.8V NiMH voltage rail — the OEM part number 098 covers both, so one cell fits either unit without modification.
- Bench tested on actual hardware: We ran this cell through charge and discharge cycles on a NiMH-compatible charger, confirmed the pack accepts charge without thermal event, and verified the terminal voltage holds within the 4.8V nominal band under simulated scan-trigger load.
- First-shift cradle protocol: After installing this cell, seat the scanner in its cradle and run a full charge cycle before picking up a shift. The scan trigger inrush current peaks when the cell is near minimum charge — a pre-charged cell prevents a false low-voltage cutoff the first time the trigger fires under load.
Cradle showing charging error on a freshly installed pack
A new NiMH cell starts with a resting voltage lower than the dock expects if the pack sat in storage for several months. Some Quick Check cradles interpret this as a fault and flash a charge error instead of entering normal charge mode. Wipe the battery contacts and the dock contacts with a dry cloth, reseat the scanner firmly, and listen for the dock click. If the error clears, the cradle is now reading the pack correctly and will charge normally from that point.
Scanner not reading barcodes immediately after battery swap
The laser or imager in the Quick Check 150 requires a minimum supply voltage to fire at full power — if the replacement cell has not yet been charged, the unit may power on but fail to produce a clean read or produce no scan beam at all. This is a voltage floor issue, not a scanner fault. Place the unit in the cradle for a full charge cycle first. Once the cell reaches 4.8V nominal, barcode reads should restore immediately.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: PSC
- Manufacturer: CS
- Series: Standard
- Color: Green
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Quick Check 150 keeps dropping its wireless connection mid-scan burst — could the new battery be causing this?
Yes. During a rapid scan burst the scanner fires the imager and transmits data over the wireless link at the same time, which creates a combined inrush that a low or partially charged NiMH cell cannot sustain cleanly. The voltage sags briefly, the radio drops its link, and the scanner appears to freeze or disconnect. Charge the pack fully in the cradle before the shift — a cell sitting at 4.8V nominal handles the combined draw without the voltage sag that trips the radio.
The scanner gets noticeably warm after a few hours of continuous use — is that normal?
NiMH cells do generate heat during sustained discharge, and a small handheld housing like the Quick Check 150 has limited airflow to dissipate it. Warmth during extended pick-and-pack shifts is expected, but the cell should not be hot to the touch. If it is, check that the cradle charged the pack fully before the shift rather than partially — a cell forced to work harder from a lower state of charge runs warmer. A full 4.8V charge before each shift keeps operating temperature in the normal range.
After a few weeks the scanner isn't lasting as long between charges as it did when the new battery first arrived — what's happening?
NiMH cells can develop shallow-cycle memory if they are repeatedly topped up in the cradle after only brief use rather than running through deeper discharge cycles. The cell's usable capacity narrows over time and the scanner returns to the cradle sooner each shift. To slow this, let the scanner run through a normal full shift before recharging rather than docking it during short breaks. This keeps the cells cycling through a wider voltage window and preserves usable capacity.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





